Military Engineer Services-MES has published Tender For Repair To Solar Street Lights, Traffic Lights, Mechanical Laundry Plant And Allied Works At Yol Cantt. Submission Date for this Tender is 03-07-2023. Solar Light Tenders in Kangra Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 16-Jun-2023 | Revised BOQ | BOQ | 26-06-2023 |
2 | 26-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-07-2023 |
Sl. No. | Item Description |
1 | Taking down old defective solar security light fitting any type for repair and replacement of brunt/ worn out accessories/ parts and refixing on its original place and testing complete all as specified.Guideline of MNRE Note : (a) Accessories/ parts shall be measured and paid separately under relevant items as "Supply Only". (b) Labour charges for fixing shall deemed to be included in unit rate quoted. |
2 | Supply only of LED 30 Watt solar light fitting for existing make complete all as specified. |
3 | Supply only Battery terminals set complete all as specified. |
4 | Supply only Batteries for solar Security light andtraffic light fitting, 12 Volts, 40/50 AH, maintenance free with three years warranty complete all as specified. |
5 | Supply only Charger with PCB controller suitable as per exisitng make, complete all as specified. |
6 | Supply only of solar panel plate complete all as specified. |
7 | Shifting of solar security light fitting one location to another location not more than 2 KM to other carefully with the help of tractor/crane incuding all towing arrangement and taking out all connections, earthing of defective parts of solar street light and connecting carefully all connection and incudingl earth work, PCC for M-15 Type B-1 for embedding of pole, painting of pole paint as required at site and as directed by Engr-in-Charge. |
8 | Replacement of Traffic LED lights complete with and including taking down old defective traffic light fittings of any capacity, complete all as specified and directed by Engr-In-Charge. |
9 | Painting to existing steel tubularpoles for solar street light/ solar traffic light, 6m long including angle iron support, bracings, clamps etc. with two coats of aluminum paint superior quality of approved make on surfaces exposed to viewsurface above PCC benching including preparation of old painted surfaces by scraping complete all as specified & directed. |
10 | Replacement of Steel tubular poles complete with base plate 8mm thick welded with pole, finial taper plug, bolt, nut and screws as specified (6m long) including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view above PCC benching including numbering with black paint and painting with bituminous paint internally complete and externally for portion embedded in PCC including dismantling of old type of poles any length, complete all as specified and directed. Note : Excavation & earth work and PCC shall be measrued and paid separately. |
11 | Plain cement concrete M-10 nominal mix, type C-1 using 20mm graded crushed stone aggregate as in foundation of poles, coping, stays etc. as mass concrete, complete all as specified. |
12 | Opening, dismantling and taking down for replacement of unserviceable spare part of machanical laundry plant for washing mechine and dryer plant, complete servicing including testing after comissioning at site complete all as specified and directed by Eng-in-charge. Note for Serial Item No 12:- Replaced sparesparts shall be measured and paid separately under respective Items of Schedule "A" as supply only. (b) However small pieces of wire terminals, soldering/ clipings required at site for proper fuctioning of the Machanical loundary is deemed to be included in quoted rates under this item. |
13 | Supply only digital temperature controller select type TC-203. |
14 | Supply only Timer 6 Pole 220V for clock wise and anticlock wise rotation. |
15 | Supply only Triplepole power contactor, 415V ML-06 100 Amp. |
16 | Supply only 4 pole MCCB 80 Amp "C" curve, 415 V 50 Hz 10kA |
17 | Supply onlyrubber gasket for front locking door for washing machine. |
18 | Supply only shaft bearing size 1 feet long & dia 40mm. |
19 | Supply only shaft bearingbush for drier with complete kit. |
20 | Supply only rubber gasket round type for front locking door. |
21 | Supply only ball bearing 6207. |
22 | Supply only pulley beltA57, 1408. |
23 | Supply only pulley beltB70, 1778. |
24 | Supply only pulley belt A70, 1821. |
25 | Supply only pulley belt A90, 2285. |
26 | Supply only blower heating element 3KW for dryer. |
27 | Supply only rubber bush |
28 | 4.00 Sqmm copper conductor 2 core, FRLS (Multi strand) PVC insulated ISI Marked unsheathedcable drawn intoPVC conduit pipe adequate size andconnecting to solar light to PCB and battery, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail