|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and saplings of girth upto 30 cm measured at height of1m above ground level and removal of rubbish upto a distanceof 50m outside the periphery of the area cleared. |
| 2 | Earth work inexcavation by mannual means over areas (exceeding 30 Cm in depth, 1.5 m in width as well as 10 Sqm2 in width) and for shafts,wells.cesspitsand the like not exceeding 10 sqmon plan, including disposal ofexcavated warth lead upto 1 meters for cutting edge, disposed earth to be levelled andneatly dressed in All Kind of Soil. 20% Ordinary Rocks. |
| 3 | Earth work inexcavation by mannual means over areas (exceeding 30 Cm in depth, 1.5 m in width as well as 10 Sqm2 in width) and for shafts,wells.cesspitsand the like not exceeding 10 sqmon plan, including disposal ofexcavated warth lead upto 1 meters for cutting edge, disposed earth to be levelled andneatly dressed in All Kind of Soil. 80% Ordinary Rocks. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering,shuttering,finishing and reinforcement:- All work upto plinth level 1:5:10 (1 Cement : 5 Coarse Sand : 10 graded stone aggregate 40 mm nominal size) |
| 5 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6: 12(1 Cement : 6 Coarse Sand :12 graded stone Aggregate 20mm nominal size).and curing complete with cement mortar 1:6 (1 Cement : 6 Coarse Sand) |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse Sand : 6 graded stone aggregate 20 mm nominal size) |
| 7 | Steel work weldede in built up section/framed work, including cutting hositing fixing in position and applying a priming coatapproved steel primer using structural steel etc. as required. In strating framesguard bar ladder brackets gates and similar works Rivetted/using Nutt bolt iron 50x50x6=30 Rmt. & iron 40x40x6=30 Rmt. |
| 8 | Providing and fixing precoated galvanized iron profile sheets (size shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm(+0.05%) total coated thickness with zink coating 120 grame per sqmas per IS:277, in 240 mpa steel grade,5-7 micronsepoxy primer on both side of thesheet andpolyster top coat 15-18 microns. The sheets shell be fixed using self drilling/self tapping screws of size(5.5*55mm) with EPDM SEAL COMPLETE INCLUDING cutting to size and shapewheever required. |
| 9 | Pointing onstone work with cement morter 1:3 in (1:3) flush/Ruled pointing. |
| 10 | Carriage of different Materials from source to site ofwork(Sand average42 Kmby MT & 200 Meter by Head Load) |
| 11 | Carriage of different Materials from source to site ofwork(Bajri up to 40 mm size average 42 KM by MT & 200 Mtr. By Head Load) |
| 12 | Carriage of(Cement average10 KM by MT & 200 Meter by Head Load) |
| 13 | Carriage of Bajri above 40 MM42 KM by MT and 200 Meter by Mannual Transport) |
| 14 | Carriage of Stone average600 Meterby Mannual Transport . |
| 15 | Sign.board including carriage painting complete job of six 3 with vertical angale iron 2 Nos. of 40X40X6mm of high 7 with 1 mm thick ms sheets |
