Tender For Supply Of Precision Instrument

Sharing tender

Supply Of Precision Instrument Supply, And Installation Of Precision Instrument For The Upgradation Of Priority Itis Across Uttarakhand , Supply, And Installation Of Precision Instruments For The Upgradation Of Priority Gitis Across Uttarakhand , Angle Gauge For Tool Grinding , Bevel Gauge 200 Mm , Bore Dial Gauge Stems 12 To 35 Mm, 35 To 65 Mm.,Dial Gauge Indicator Of 0.01 Accuracy. , Bore Gauge Dial Indicator (1 Mm Range, 0-0.01 Mm Graduation)-Range Of Bore Gauge 18-150 Mm) , Centre Gauge Com. 55° And 47½° , Centre Gauge Com.60°, 55° And 29° , Combination Set 300 Mm (Complete Set) , Cylinder Bore Gauge Capacity 20 To 160 Mm , Dial Test Indicator Lever Type-Range 0-0.8 Mm , Graduation 0.001 Mm, Reading 0-50 With Revolution Counter , Dial Test Indicator Plunger Type-Range 0-10 Mm , Graduation 0.01 Mm, Reading 0-100 With Revolution Counter , Dial Test Indicator Plunger Type-Range 0-20 Mm , Graduation 0.01 Mm, Reading 0-100 With Revolution Counter , Dial Vernier Caliper 200 Mm , Dial Vernier Caliper 300 Mm , Digimatic Electronic Outside Micrometer (0 To 25 Mm) Lc 0.001 Mm , Digimatic Electronic Vernier Caliper 200 Mm , Digital Micrometer 0-25 Mm , Digital Outside Micrometer 0 To 25 Mm , Digital Vernier Caliper 0 - 150 Mm L.C. 0.02 Mm , Digital Vernier Caliper 0 - 200 Mm L.C. 0.01 Mm , Digital Vernier Caliper 0 - 300 Mm L.C. 0.01 Mm , Direct Reading Vernier Caliper 0- 300 , Drill Gauges Letter Drill Gauge (A To Z), Number Drill Gauge (1 To 60), Metric Drill Gauge (1.5Mm To12.5Mm, 30 Holes) , Drill Point Angle Gauge , Drill Point Angle Gauge 45°, 60° And 90° , Engineer’S Square 150 Mm Blade , Engineers Rule 300Mm , Engineers Square 700 Mm , Feeler Gauge 0.05 Mm To 0.3 Mm By 0.05 And 0.4 Mm To 1 Mm By 0.1 Mm , Gauge - Radius Set 1 Mm To 25 Mm By 0.5 Mm , Gauge Plug Single Ended 5 To 55 By 5Mm. Set Of 11 Pcs. , Gauge Snap Go And Not Go , Inside Micrometer Range 50-63 Mm , Inside Micrometer Up To 0 To 25 Mm , Limit Plug Gauges 5 Mm To 25 M By 2.5Mm (Go & No Go) , Limit Plug Gauges Ø20mm , Morse Taper Plug & Ring Gauge No. 0 To 7 Mt , Optical Bevel Protractor , Outside Micrometer 0 To 25 Mm , Outside Vernier Micrometer 0- 25 Mm Lc 0.001Mm , Plain Ring And Plug Gauge(12,16,20,25,30,32,36,40,45,50Mm) , Plug Gauge Morse Taper No.1, 2, 3, 4, , Protractor With Blade 150 Mm , Ring Gauge Morse Taper No.1, 2, 3, 4, , Ring Gauges 5 Mm To 25 M By 2.5Mm (Go & No Go) , Screw Pitch Gauge Metric 0.25 To 6Mm , Screw Pitch Gauge Whitworth & Metric Each(0.25 To 6Mm) , Screw Thread Micrometer (0-25 Mm) , Scribing Block Universal 220 Mm , Scribing Block Universal 300 Mm , Sheet Metal Gauge , Sine Bar 125 Mm , Sine Bar 200 Mm , Slip Gauge Box (Workshop Grade) - 87 Pieces Per Set , Spirit Level 0.05 Mm / 200 Mm , Spirit Level 150 Mm, Accuracy 0.02 Mm / 1000 Mm , Spirit Level 2 V 250, 05 Meter , Spirit Level For Floor Level Check , Spirit Level Metal Type - 2 300 Mm Basic Lengthaccuracy 0.1Mm/Meter , Spirit Level Precision Metallic 200Mm , Steel Rule Graduated Both In Metric And English Unit 300 Mm , Steel Rule Graduated Both In Metric And English Unit 300 Mm With Precision Of 1/4Th Mm , Steel Rule With Metric & British Graduation 150Mm , Steel Square 450Mm X 600 Mm X 50 Mm Thick , Straight Edge Gauge 2 Ft , Straight Edge Steel 1000 Mm , Surface Gauge With Dial Test Indicator Plunger Type-Range 0-10 Mm , Graduation 0.01 Mm, Reading 0-100 With Revolution Counter , Surface Roughness Comparison Plates N1 - N12 Grade , Taper Gauge M.T. No. 1, 2, 3, 4 & 5 , Telescopic Gauge 13 Mm To 300 Mm , Telescopic Gauge 8 Mm To 150 Mm , Thread Plug Gauge M-20 & M-21 , Thread Ring Gauge M-20 & M-21 , Try Square 150 Mm Blade , Try Square 300 Mm , Universal Dial Test Indicator Plunger Type-Range 0-10 Mm , Graduation 0.01 Mm, Reading 0-100 With Revolution Counter , Vernier Bevel Protractor With 150 Mm Blade , Vernier Bevel Protractor With 300 Mm Blade With Acute Angle Attachment , Vernier Bevel Protractor With300 Mm Blade With Nablaccredited Lab. Certificate , Vernier Caliper 0-250 Mm , Vernier Caliper 0-300 Mm , Vernier Caliper 150 Mm , Vernier Caliper 200 Mm , Vernier Caliper Outside, Inside And Depth 200 Mm , Vernier Gear Tooth Caliper , Wing Compass 300 Mm , Wire Gauge, Metric Standard. , Depth Micrometer 0-25Mm (Extension Rod-200 Mm) , Depth Micrometer 0-25Mm (Extension Rod-150 Mm) , Dial Test Indicator Lever Type-Range 0-10 Mm , Graduation 0.01 Mm, Reading 0-100 With Revolution Counter , Inside Micrometer Up To 0 To 25 Mm (Tubular) , Scribing Block Universal 150 Mm , Steel Rule Graduated Both In Metric And English Unit 300 Mm (Precision Of 1/4Th Mm) , Steel Rule Graduated Both In Metric And English Unit 600 Mm , Vernier Height Gauge 0 - 250 Mm With Least Count 0.02 Mm , Vernier Height Gauge 0 - 300 Mm With Least Count 0.02 Mm , Vernier Height Gauge 0 - 500 Mm With Least Count 0.02 Mm