Tender For Construction Of Mini Rural Water Supply Scheme Solar Motor Pump Complete Set In Block Birni Panchayat Arari Village Dabarseni And Markodih Road Svs Group Of Scheme Under Jjm D.W.S. Division, No 2 Giridih For The Year 2022-23 Svs 64, giridih-Jharkhand

Construction Of Mini Rural Water Supply Scheme Solar Motor Pump Complete Set In Block Birni Panchayat Arari Village Dabarseni And Markodih Road Svs Group Of Scheme Under Jjm D.W.S. Division, No 2 Giridih For The Year 2022-23 Svs 64 , Model- 04 (16000 Litre 12 M Staging) , Construction Of 200 Mm X 165 Mm X 120.00 M Deep High Yield Drilled Tube Well , Hydt : Cost Of Drilling 200Mmx165mmx125 Mtr Deep Bore Well In All Kinds Of Soil And Rock In Rural Area For Installation Of Pump Bore Set With Hydraulic Dth Rig Machine, All Complete Including Supplying All Materials, Tools, Drilling Rig, Air Compressor And Equipments, As Well As Fuel, Lubricants And Cost Of Transportation Of Rig Machine And Other Vehicles Up To The Site. , (A) 0.00M Up To 50.00M Depth Below G.L. In Rural Areas , (B) Above 50.00 M Depth. In Rural Areas , Supplying All Tools, Tackles & Lowering Of 200 Mm Dia Ms Erw Casing Pipe Of 6Mm Wall Thickness Including Welding Charges, Cost Of Pipe Etc. All Complete Job. , Supplying All Materials, Labour, Tools & Equipments For Fitting & Fixing 200Mm Dia Ms Cap Over Casing Pipe Complete Job. , Supplyingmaterials And Labours For Constructing Bore Well Chamber Of 75B Designation Brick Masonry Chamber 600Mmx450mm And 750Mm Deep Internal Dimension Having 250Mm Thickness In Cement Mortar 1:6 Including 12Mm Cement Plaster 1:6 With 600Mmx475mm Rcc Cover With Earth Work In Excavation And 75Mm Thick Pcc(1:3:6) In Foundation And Refilling All Complete As Per Specification And Direction Of E/I. , 2 H.P. D.C. Solarmotor Pump Complete Set , Designing, Supplying, Installation, Testing & Commissioning With All Tools & Parts Of Following Solar Photovoltaic (Spv) Solar Submersible D.C. Water Motor Pump Suitable For Minimum 125Mm X 115Mm Bore Well As Per Mnre Guideline With Following Specifications & Accessories. , Spv Arrays Contains Specified No Of Same Capacity Type & Specification Modules Connected To Series Or Parallel To Obtained The Required Voltage & Current The Power Output Of Individual Pvmodules Should Be Minimum 200 Watt Peak. , I) The Spv Modules Should Be As Per Iec-61215 And Iec 61730 Part 1.0) , Ii) All External Parts Of Motor Pump Used In Submersible Pump Which Are In Contact Of Water Is Stainless Steel Grade 303 Or Higher As Required. , Iii) The Pv Modules Shouldbe Mounted On Metallic Structure Of Adequate Strength And Appropriate Design Which Can Withstand Load Of Modules & High Wind Pressure Up To 200Km/H. , Iv) The Module Mounting Structure Should Be Hot Dip Galvanized According To Is 4759. , V) To Enhance The Performance Of Spv Water Pumping System & Arrangement For Seasonal Tilt Angle Adjustment Should Be Provided , Vi) Necessary Arrangement Should Be Provided In Controller Automatic Start-Run-Stop Through Out The Day With Water Level Detection System. (As Per Mnre Specification) , Vii) Necessary Protection Such As Lightening Arrestor Etc. Should Be Provided To Protect The Controller & Spv , Viii) The Suction/Delivery Pipe Shall Be Upvc / H.D.P.E. Pipes Of Appropriate Size 60M Or More As Required Minimum Pressure Rating Of 8Kg/Sq Cm- Pe 100 Grade For Pump Up To 3Hp & 10 Kg/Sq Cm- Pe 100 Grade For 5 Hp. , Ix) All Cable Used Shall Be As Per Is 694. Suitable Size Of Cable Shall Be Used In Sufficient Length For Inter Connection Between The Spv Array To Spv Controller And Spv Controller To Solar Power Pump. Provision Of Cable Shall Be As Per Is 14536. , X) The Motor Pump Set Should Have A 5 Years Warranty. , Xi) Control Panel Suitable For Motor Pump With Arrangement Of Dry Run & Over Flow Protection Sensor, Float Switch & Rain Prevention Box. (As Per Mnre Specification) , Xii) The Spv Controller Must Have Ip-65 Protection Or Must Be Housed In Cabinet Having At Least Ip-65 Protection. , Xiii) The System Should Be As Per Mnre Guide Line & Ecofriendly With Suitable Arrangement To Operate New Pump Manually. , Xiv) With Third Party Inspection Before Dispatch. , Xv) Provision For Web Basedremote Monitoring Of The Pumps To Be Installed Must Be Made Through The Inbuilt Controllers . It Should Be Possible To Ascertain The Daily Water Output, The Power Generated By Pv Array ,The Up And Downtime Of The Pump During The Year, Number Of Days The Pump Was Unused Or Under Breakdown Repairs. , The Following Details Should Be Marked Indelibly On The Motor Pump Set , A) Name Of The Manufacturer Or Distinctive Logo. , B) Model Number. , C) Serial Number. , Solar Submersible Motor Pump (Spv Dc Type) , I) 2 Hp (Dc Pump) With 1800 Wp Minimum Watt P.V. Panel As Mnre Pump Head Max Shut-Off Head Up To 100 Mtrs. For Higher Or Lower Head Or In Between Various Modules Output Could Be Decided On Prorates Basis. (As Per Latest Guide Line Of Mnre) , Provision Of Solar Night Lamp. , 16000 Litre Capacityr.C.C. Water Tank (2.7 X 2.7 X 2M Internal Size) With 12 M Staging Havingutility Room At Ground Level , Earth Work In Excavation In Foundation Trenches In Ordinary Soil (Vide Classification Of Soil Item-B ) And Disposal Of Excavated Earth As Obtained To A Distance Up To 50 M Including All Lifts,Levelling,Ramming The Foundation Trenches, Removing Roots Of Trees Shrubs All Complete As Per Approved Design, Building Specification And Direction Of E/I. , Providing P.C.C.M-150 In Nominal Mix Of (1:2:4) In Foundation With Approved Quality Of Stone Chips 20Mm To 6Mm Size Graded And Clean Coarse Sand Of F.M 2.5 To 3 Including Screening, Mixing Cement Concrete In Mixer And Placing In Position,Vibrating,Curing,Taxes And Royalty All Complete As Per Building Specification Direction Of E/I. , Providing And Laying In Situ Cement Concrete Of Trap/Granite/Quartzite/ Gneiss Metal For Rcc Work In Foundation Like Raft, Grillage, Strip Foundation And Footing Of Rcc Columns And Steel Stanchions Including Normal Dewatering, Plywood Form Work, Bully/Steel Propups, Compaction, Finishing Andcuring, Etc, Complete. (By Weigh Batching And Mix Design For M-250Only. Use Of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, Etc. Cement Is Permitted.) , Providing And Casting In Situ Cement Concrete Of Trap/Granite/Quartzite/ Gneiss Metal Of Approved Quality For Rcc Work As Per Detailed Drawings And Designs Or As Directed By Engineer-In-Charge Including Normal Dewatering, Centering, Plywood Formwork, Bully/Steel Prop-Ups, Compaction, Finishing The Formed Surfaces With Cm 1:3 Of Sufficient Minimum Thickness If Special Finish Is To Be Provided And Curing, Etc. Complete. (By Weigh Batching And Mix Design For M-250 And M-300 Only.Use Of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, Etc. Cement Is Permitted) , Column From G.L To Roof Beam Of Utility Room , Column From Roof Beam To 2Nd Bracing Beam Of Utility Room , Column From 2Nd Bracing Beam To 3Rd Bracing Beam , Column From 3Rd Bracing Beam To Tank Base , Providing And Casting In Situ Cement Concrete Of Trap/Granite/Quartzite/ Gneiss Metal Of Approved Quality For Rcc Work As Per Detailed Drawings And Designs Or As Directed By Engineer-In-Charge Including Normal Dewatering, Centering, Plywood Formwork, Bully/Steel Prop-Ups, Compaction, Finishing The Formed Surfaces With Cm 1:3 Of Sufficient Minimum Thickness If Special Finish Is To Be Provided And Curing, Etc. Complete. (By Weigh Batching And Mix Design For M-250 And M-300 Only. Use Of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, Etc. Cement Is Permitted) , Bracing , Beam Of Tank Floor , Providing And Casting In Situ Cement Concrete Of Trap/Granite/Quartzite/ Gneiss Metal Of Approved Quality For Rcc Work As Per Detailed Drawings And Designs Or As Directed By Engineer-In-Charge Including Normal Dewatering, Centering, Plywood Formwork, Bully/Steel Prop-Ups, Compaction, Finishing The Formed Surfaces With Cm 1:3 Of Sufficient Minimum Thickness If Special Finish Is To Be Provided And Curing, Etc. Complete. (By Weigh Batching And Mix Design For M-250 And M-300 Only. Use Of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, Etc. Cement Is Permitted) (Excluding M.S, Or Tor Reinforcement) For Rcc M-300 Grade Slabs / Landings / Vertical Walls Section-G-Plain And Reinforced Cement Concrete , Tank Floor Roof , Tank Roof Top , Providing Coarse Clean Sand In Filling In Foundation Trenches Or In Plinth Including Ramming And Watering In Layers Not Exceeding 150Mm Thick With All Leads Including Cost Of Materials,Labours,Royalityand Taxes All Complete As Per Building Specification And Direction Of E/I.(Mode Of Measurement-Compacted Volume). , Providing Designation 100 A One Brick Flat Soling Joints Filled With Local Sand Including Cost Of Watering, Taxes Royalty All Complete As Per Building Specification And Direction Of E/I. , Filling In Foundation Trenches And Plinth In Layers Not Exceeding 150Mm Thick, Well Watered,Rammed,Fully Compacted And Fine Dressed With Earth Obtained From Excavation Of Foundation Trenches Within A Lead Of 50M And Lift Of 1.5M All Complete As Per Building Specifications And Direction Of E/I.(Mode Of Measurement-Compacted Volume). , Providing Designation 75 A Brick Work In C.M(1:6) In Foundation And Plinth With Approved Quality Of Clean Coarse Sand Of F.M.2 To2.5 Including Providing 10Mm Thick Mortar Joints, Cost Of Screening,Scaffolding,Raking Out Joints To 15Mm Depth,Curing,Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing Designation 75A Brick Work In C.M(1:6) In Superstructure With Approved Quality Of Clean Coarse Sand Of F.M 2 To 2.5 Including Providing 10Mm Thick Mortar Joints, Cost Of Screening,Scaffolding,Raking Out Joints 15Mm Depth,Curing,Taxes And Royalty All Complete As Per Bldg. Specification And Direction Of E/I. , Providing R.C.C.M-200 In Nominal Mix Of (1:1.5:3) In Lintel With Approved Quality Of Stone Chips (20Mm To 6Mm Size) Graded And Clean Coarse Of F.M 2.5 To 3 Including Screening, Centering, Shuttering, Mixing Cement Concrete In Mixer And Placing In Position, Vibrating Striking, Curing(But Excluding The Cost Of Reinforcement),Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing Av.63 Mm Thick R.C.C M-200 In Nominal Mix Of (1:1.5:3) Chhajja With Approved Quality Of Stone Chips (20Mm To 6Mm Size) Graded And Clean Coarse Sand Of F.M 2.5 To 3 Including In Mixer And Placing In Position,Vibrating,Striking,6Mm Cement Plaster(1:4) In Ceiling And Sides Of Chhajja With Sand Of F.M 1.5, Curing(But Excluding The Cost Of Reinforcement) Taxes, And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing T.M.T Steel Reinforcement Of Different Dia Rods As Per Approved Design And Drawing Including Carriage Of M.S Bars To Work Site, Cutting Bending And Binding With Annealed Wire With Cost Of Wire, Removal Of Rust, Placing The Rods In Position All Complete As Per Building Specification And Direction Of E/I. , Supplying, Fitting And Fixing M.S Grill Made Of 20*6 Mmm.S Flats As Per Approved Design And Drawing, Properly Fabricated With Joints Continuous Fillet Welded And Finished Smooth, Carriage Of Grill To Work Site, Hoisting As Per Building Specification And Direction Of E/I. , Providing And Fixing Fan Hooks Of 16 Mm Dia M.S.Bar & 1 Meter Long Bent To Required Size And Shape, Placed In Position And Fixed In The R.C.C. Slab/Beam At The Time Ofcasting All Complete As Per Building Specification And Direction Of E/I. , Supplying, Fitting And Fixing 20 Gauge G.C.I Sheet Gate Fitted On M.S Angle Frame Of Size60*60*6 Mm Including Cost Of Fabrication, Providing Necessary Locking Arrangement With Haskal And Domny Duly Fixed In C/C(1:2:4) Blocks Of Required Size, Applying A Priming Red Lead Paint Over Steel Work, Taxes All Complete As Per Drawing Specification And Direction Of E/I. , Providing 12 Mm Cement Plaster (1:4) With Clean Coarse Sand Of F.M 1.5 Including Cost Of Screening, Curing With All Leads And Lifts Of Water,Scaffolding,Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing 12 Mm Cement Plaster (1:6) With Clean Coarse Sand Of F.M 1.5 Including Cost Of Screening, Curing With All Leads And Lifts Of Water,Scaffolding,Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing 6 Mm Cement Plaster (1:4 ) In Ceiling With Clean Coarse Sand Of F.M 1.5 Including Cost Of Screening, Curing With All Leads And Lifts Of Water,Scaffolding,Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing 12 Mm Cement Plaster (1:3) With Clean Coarse Sand Of F.M 1.5 With Floating Coat Of Neat Cement In Skirting Including Rounding Of Junctions With Floor,Curing,Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing 19 Mm Water Proof Cement Plaster (1:3) With Clean Coarse Sand Of F.M 1.5 With 5% Cico Or Any Other Approved Water Proofing Compound Including Cost Of Screening, Curing With All Leads And Lifts Of Water,Scaffolding,Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing 1.5 Mm Cement Punning Including Curing, Carriage Of Water With All Leads And Lifts As Per Building Specification And Direction Of E/I. , Providing Two Coats Of Snowcem Of Approved Shade And Make Over Old Surface Including Washing, Cleaning, Sand Papering The Wall,Scaffolding,Curing And Taxes All Complete As Per Building Specification & Direction Of E/I. , Extra For Each Coat Of Cement Wash, Distemper Paint Or Snowcem Over Exterior Surface For Each Consecutive Floor Above First Floor Including Scaffolding Etc All Complete As Per Building Specification & Direction Of E/I. , Providing Two Coats Of Synthetic Enamel Paint Of Approved Shade And Make Over Steel Surface Throughly,Scaffolding And Taxes All Papering Including Cost Of Scaffolding And Taxes All Complete As Per Building Specification & Direction Of E/I. , Providing And Fixing G.I. Pipe Railing Having 1.0 M Height Consisting 50 X 50 X 6 Mm Thick M. S. Angles As Verticals At 1.5 M C/C, And Additional Posts At Every Corner With 3 Rows Of 25 Mm Dia G.I. Pipes Of Medium Class Variety As Horizontal And Painting 3 Coats Of Oil Paint Over 1 Coat Of Anticorrosive Paint Of Approved Colour And Shade Including Cost Of All Labour, Transporting Bends To Curved Shape, Etc. Complete. , Providing And Fixing In Position M.S. Ladder 0.50 M Wide Consisting Of 75 X 10 Mm M.S. Flats As Stringers And 16 Mm Dia M.S. Bars In Double Rows As Steps Placed At 25 Cm C/C Including Cost Of Material And Labour Involved, Welding, Anchoring And Applying 3 Coat Of Anti-Corrosive Paint, Etc. Complete As Directed By Engineer-In-Charge. , Carriage Of Materials From Different Sources Or Departmental Stores To Work Site Including Loading, Transporting, Unloading And Stacking The Materials At Work Site Etc. All Complete Job. As Per Direction Of E/I. , Cement Lead 10 Km (Avg.) , Sand Lead 36 Km (Avg.) , Stone Chips Lead 11 Km (Avg.) , Steel Reinforcement Lead 10 Km (Avg.) , Bricks Lead 06 Km (Avg.) , Distribution Network & House Connection60 - 80 Nos. Including Platform & Stand Post , Earth Work In Excavation In Foundation Trenches In Hard Soil (Vide Classification Soil Item B) And Disposal Of Excavated Earth As Obtained To A Distance Up To 50 Mtr. Including All Lifts, Leveling, Ramming The Foundation Trenches, Removing Roots Of Trees, Shrubs All Complete As Per Approved Design, Specification And Direction Of E/I. , Dismantling Plain Cement Concrete Work Including Stacking Serviceable Materials In Countable Stacks Within 15 M Lead And Disposal Of Unserviceable Materials With All Leads All Complete. , Providing Pccm-200 With Nominal Mix Of (1:1.5:3) With Approved Quality Of Stone Chips 20 Mm To 6 Mm Size Graded And Clean Coarse Sand Of Fm 2.5 To 3.0 Including Screening, Shuttering, Mixing Cement Concrete In Mixer And Placing In Position, Vibrating, Sticking, Curing , Taxes And Royalty All Complete As Per Specification And Direction Of E/I. , Rising Main , Manufacture, Supply And Delivery Offollowing Nominal Dia Upvc Column Pipes Including Pvc Socket (Coupler), , 65 Mm Dia -Density Of Pipe 1.38 To 1.43 Gm Per Cm3 Od:74.5 To 75.2Mm Wall Thickness End:9Mm To 10.7Mm, Barrel 9Mm To 10.7 Mm, Length: 3Mtrs.Rising Main , 80 Mm Dia -Density Of Pipe 1.38 To 1.43 Gm Per Cm3 Od:87.5 To 88.2Mm Wall Thickness End:9 .8 Mm To 11.9Mm, Barrel 7.3Mm To 9 Mm, Length: 3Mtrs. Delivery Pipe , Distribution , Providing And Supplying High Density Polyethylene Pipe (Hdpe Pipe) Of 20 Mm To 225 Mm Od And Pressure 6.0 Kg/Cm2 And 10 Kg/Cm2 Suitable For Water Supply Which Is Available In All Standard Conforming To Isi -- 4984/14151/12786/13488,Iso 4427 , Din-8074Materials Rates Are Ex-Factory Excluding Transportation, Taxes And Duties. Pe-80 , Pn- 10 , 63 Mm Hdpe Pipe , 50 Mm Hdpe Pipe , 32 Mm Hdpe Pipe , 20 Mm Hdpe Pipe , Providing And Fixing Gun Metal Gate Valvewith C I Wheel Of Approved Quality(Screwed End). , 80 Mm Dia. , 65 Mm Dia. , Providing And Supplying High Density Polyethylene(Hdpe )Fittings Of 20 Mm To 225 Mm Od And Pressure 6.0 Kg/Cm2 And 10 Kg/Cm2 Suitable For Water Supply Which Is Available In All Standard Conforming To Isi -- 4984/14151/12786/13488,Iso 4427 , Din-8074Materials Rates Are Ex-Factory Excluding Transportation, Taxes And Duties. Pe-80 , Pn- 10 , Lowering, Laying And Jointing H. D. P. E./M. D.P. E. Pipes In Proper Position Including All Specials By Compression Fitting/Electro Fusion And Butt Fusion Jointing Procedure As Per Relevant Is Code Complete With All Materials For Jointing Procedure Like Electro Fusion Machine, Electric Heater/Butt Fusion Welding Machine With Hydraulic Jack, Top Loading Clamp Etc. And All Labours As Directed By Engineer In Charge As Per Is-7634 Part Ii. , For Rising , 80 Mm Hdpe Pipe , 63 Mm Hdpe Pipe , Distribution , 63 Mm Hdpe Pipe , 50 Mm Hdpe Pipe , 32 Mm Hdpe Pipe , 20 Mm Hdpe Pipe , Providing 15 Mm Dia. G.I. Pipe Tata Or Equivalent Make As Per Is 1239 (Part 1/2004) Isi Mark /Medium Quality In Stand Post. , Supplying All Materials , Labour And Tools For Fixing 15 Mm Dia G.I. Pipes With Red Lead And Yarn Of Following Nominal Bore With Screwed And Socketed Joints On Wall, Ceiling And Floor Including Supplying And Fitting Of Wall Hooks Or Pipe Clamps, Wooden Plugs, Cutting Pipes To Size And Threading Ends If Required Etc. All Complete As Per Specification And Direction Of Engineer-In-Charge. , Supplying And Fixing G.I. Fittings Of Approved Make All Complete As Per Specification And Direction Of E/I. , Elbow 15 Mm Dia. , Reducer Socket 20X15 Mm Dia. , Nipple 15 Mm Dia. , Plain Socket 15 Mm Dia. , Supplying And Fixing G.M. Ferrule Of Approved Make In Existing C.I./D.I. Main Including Drilling And Taping C.I./D.I. Main All Complete As Per Specification And Direction Of E/I. 3 Mm, 6 Mm 10 Mm Dm Ferrule Weight Not Less Than 425 Gram. , Providing And Fixing Of Male Ended C.I.Body Brass Spindle Valve And Seat Bib Cock Of Approved Quality With Extra Socketall Complete As Per Specification And Direction Of E/I. , 15 Dia And Weight Not Less Than 400 Gm , Providing And Fixing Gun Metal Full Way Valve Of Approved Quality, All Complete, As Per Specification And Direction Of E/I. , 32 Mm Dia And Weight Not Less Than 700 Gms , 65 Mm Dia Full Way Valve , 50 Mm Dia And Weight Not Less Than 1.5 Kg , Constructing Masonry Chamber 30X30x50 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) For Stop Cock, With C. I. Surface Box 100X100 X75 Mm (Inside) With Hinged Cover Fixed In Cement Concrete Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size), I/C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design. With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 7.5.Full Way Valve Chamber , Providing Brick Masonry Chamber Ofinner Size 600 X 600 X 450 Mm Deep For Bore Well Protection Having 125 Mm Thick Wall And 75 Mm R.C.C Cover Including Cement Plaster Of Exposed Surface, Etc All Complete Job , Supplying Materials , Labours And Equipments For Construction Of 0.90M X 0.90 M Size P.C.C. (1:2:4) Rectangular Platform With Stand Post In House Including 12 Mm Thick Cement Plaster In C.M. (1:4) With Neat Cement Punning Over Exposed Surfaceall Complete Job, As Per Approved Design, Specification And Direction Of E/I. , Earth Work In Back Filling The Trenches After Laying Different Types And Size Of Pipes With Earth Removed During Excavation Within Initial Lead And Lift As Per Specification And Direction Of Engineer-In-Charge. , Providing Fitting & Fixing 32 Mm To 50 Mm Service Hdpe Saddleall Complete Job, As Per Approved Design, Specification And Direction Of E/I. , Carriage Of Materials From Different Sources Or Departmental Stores To Work Site Including Loading, Transporting, Unloading And Stacking The Materials At Work Site Etc. All Complete Job. As Per Direction Of E/I. , Cement Lead 10 Km (Avg.) , Sand Lead 36 Km (Avg.) , Stone Chips Lead 11 Km (Avg.) , Steel Reinforcement Lead 10 Km (Avg.) , Bricks Lead 06 Km (Avg.) , Galvanised Chain Link Mess Fencing Around Solar Panel Where Bore Well Is Away From Tower , Making 30 Cm( 12) Dia Bore Up To 4M Below Ground With Hand Auger Of Approved Quality In Ordinary Soil (Vide Classification Of Soil Item-A) True To Plum And Without Eccentricity In Any Stage Of Operation And Disposal Of The Exacavated Eartrh Up To 50M Lead Including All Lifts All Complete As Per Approved Design And Direction Of E/I. , Providing P.C.C.M-150 In Nominal Mix Of (1:2:4) In Foundation With Approved Quality Of Stone Chips 20Mm To 6Mm Size Graded And Clean Coarse Sand Of F.M 2.5 To 3 Including Screening,Mixing Cement Concrete In Mixer And Placing In Position, Vibrating, Curing,Taxes And Royalty All Compelete As Per Building Specification Direction Of E/I. , Labour Cost Offitting And Fixing Galvanised Chain -Link Mess Up Height Of 2 Mincluding Cost Of Staples (But Excluding The Cost Of Cement Concrete Angle Iron Posts,Its Cutting And Making Holes,Nuts And Bolts) All Complete As Per Specification And Direction Of E/I. , Drilling 6 Mm Dia Holes In M.S Angle Iron For Fixing Of Stables Etc.As Per Building Specification And Direction Of E/I. , Labour For Cutting Of M.S Angle Iron Posts To Required Length,One End Splitted As Fish Tailed In A Length Of 150 Mm Compelete As Per Building Specification And Direction Of E/I. , Supplying,Fitting And Fixing Straining Bolts With Nut Size 22Cm*10Mm Dia Tighten The Barbed Wire With Corner Post Compelete As Per Building Specification And Direction Of E/I. , Supplying,Fitting And Fixing Galvanised Chain -Link Mess Having 3 Mm Thick Wire Cell Type 40 X 40 Mm Fitted Onm.S. Angle Frame With Two Diagonals Having 25 X 25 X 5 Mm Size Angleincludingcost Of Fabrication, Providing Necessary Locking Arrangement With Haskal And Domny Duly Fixed In Angle Post,,Applying A Priming Red Lead Paint Over Steel Work,Taxesexcluding The Cost Of Galvanised Chain -Link Mess All Complete. , Cost Of Galvanised Chain -Link Mess Having 3 Mm Thick Wire Cell Type 40 X 40 Mm Wt Not Less Than 3.1 Kg / Sq M , Cost Of 50 X 50 X 6 Mm M.S. Angle , Carriage Of Materials From Different Sources Or Departmental Stores To Work Site Including Loading, Transporting, Unloading And Stacking The Materials At Work Site Etc. All Complete Job. As Per Direction Of E/I. , Cement Lead 10 Km (Avg.) , Sand Lead 36 Km (Avg.) , Stone Chips Lead 11 Km (Avg.) , Steel Reinforcement Lead 10 Km (Avg.) , Annual Operation & Maintenance Cost Based On Existing D/T Well With Solarmotor Pump For 5 Years , O & M Cost For 1St Year (Excluding Repair Charges) , O & M Cost For 2Nd Year With Annual Repair Charges , O & M Cost For 3Rd Year , O & M Cost For 4Th Year , O & M Cost For 5Th Year , Provision Of One No Sim Card & Its Recharging Cost For Rmc , 18% Gst , Labour Cess

INR 10000 /-

INR 209000.0 /-

INR 1.04 Crore /-

Name of Work: Construction of mini rural water supply Scheme Solar motor pump complete set in Block Birni Panchayat Arari Village Dabarseni & Markodih Road SVS Group of Schemeunder JJM D.W.S. Division, no 2 Giridih for the Year 2022-23 (SVS-64)

Sl. No.	Item Description
1	MODEL- 04 (16000 Litre 12 M Staging)
2	Construction of 200 mm x 165 mm x 120.00 M deep high yield Drilled Tube well
3	HYDT : Cost of drilling 200mmX165mmX125 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site.
4	(a) 0.00m Up to 50.00m depth below G.L. In Rural Areas
5	(b) Above 50.00 m depth. In Rural Areas
6	Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job.
7	Supplying all materials, labour, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job.
8	Supplyingmaterials and labours for constructing bore well chamber of 75B designation brick masonry chamber 600mmx450mm and 750mm deep internal dimension having 250mm thickness in cement mortar 1:6 including 12mm cement plaster 1:6 with 600mmx475mm RCC cover with earth work in excavation and 75mm thick PCC(1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
9	2 H.P. D.C. SolarMotor Pump Complete Set
10	Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
11	SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PVmodules should be minimum 200 watt peak.
12	i) The SPV modules should be as per IEC-61215 and IEC 61730 part 1.0)
13	ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
14	iii) The PV modules shouldbe mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h.
15	iv) The module mounting structure should be hot dip galvanized according to IS 4759.
16	v) To enhance the performance of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
17	vi) Necessary arrangement should be provided in controller automatic start-run-stop through out the day with water level detection system. (As per MNRE Specification)
18	vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
19	viii) The suction/delivery pipe shall be UPVC / H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/Sq cm- PE 100 grade for pump up to 3HP & 10 Kg/Sq cm- PE 100 grade for 5 HP.
20	ix) All cable used shall be as per IS 694. Suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
21	x) The motor pump set should have a 5 years warranty.
22	xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE Specification)
23	xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP-65 protection.
24	xiii) The system should be as per MNRE guide line & Ecofriendly with suitable arrangement to operate new pump manually.
25	xiv) With third party inspection before dispatch.
26	xv) Provision for web basedremote monitoring of the pumps to be installed must be made through the inbuilt controllers . It should be possible to ascertain the daily water output, the power generated by PV Array ,the Up and downtime of the pump during the year, number of days the pump was unused or under breakdown repairs.
27	The following details should be marked indelibly on the motor pump set
28	a) Name of the Manufacturer or Distinctive Logo.
29	b) Model Number.
30	c) Serial Number.
31	Solar submersible motor pump (SPV DC Type)
32	i) 2 HP (DC Pump) with 1800 wp minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 100 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
33	Provision of solar night lamp.
34	16000 Litre CapacityR.C.C. Water Tank (2.7 x 2.7 x 2m Internal size) with 12 M staging havingUtility Room at Ground Level
35	Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B ) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts,levelling,ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.
36	Providing P.C.C.M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, mixing cement concrete in mixer and placing in position,vibrating,curing,taxes and royalty all complete as per building specification direction of E/I.
37	Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, "plywood form work, bully/steel propups, compaction, finishing andcuring, etc, complete. (By weigh batching and mix design for M-250only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)
38	Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, "plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only.Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted)
39	Column from G.L to roof beam of Utility Room
40	Column from Roof Beam to 2nd Bracing beam of Utility Room
41	Column from 2nd Bracing Beam to 3rd Bracing beam
42	Column from 3rd Bracing beam to Tank Base
43	Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, "plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted)
44	Bracing
45	Beam of Tank Floor
46	Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, "plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-300 grade Slabs / Landings / Vertical Walls Section-G-Plain and Reinforced Cement Concrete
47	Tank Floor Roof
48	Tank Roof Top
49	Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads including cost of materials,labours,royalityand taxes all complete as per building specification and direction of E/I.(Mode of measurement-compacted volume).
50	Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.
51	Filling in foundation trenches and plinth in layers not exceeding 150mm thick, well watered,rammed,fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specifications and direction of E/I.(Mode of measurement-compacted volume).
52	Providing designation 75 A Brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I.
53	Providing designation 75A Brick work in C.M(1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints 15mm depth,curing,taxes and royalty all complete as per bldg. specification and direction of E/I.
54	Providing R.C.C.M-200 in nominal mix of (1:1.5:3) in lintel with approved quality of stone chips (20mm to 6mm size) graded and clean coarse of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating striking, curing(but excluding the cost of reinforcement),taxes and royalty all complete as per building specification and direction of E/I.
55	Providing av.63 mm thick R.C.C M-200 in nominal mix of (1:1.5:3) chhajja with approved quality of stone chips (20mm to 6mm size) graded and clean coarse sand of F.M 2.5 to 3 including in mixer and placing in position,vibrating,striking,6mm cement plaster(1:4) in ceiling and sides of chhajja with sand of F.M 1.5, curing(but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification and direction of E/I.
56	Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
57	Supplying, fitting and fixing M.S grill made of 20*6 mmM.S flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.
58	Providing and fixing fan hooks of 16 mm dia M.S.bar & 1 meter long bent to required size and shape, placed in position and fixed in the R.C.C. slab/beam at the time ofcasting all complete as per building specification and direction of E/I.
59	Supplying, fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S angle frame of size60*60*6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in C/C(1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
60	Providing 12 mm cement plaster (1:4) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
61	Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
62	Providing 6 mm cement plaster (1:4 ) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
63	Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor,curing,taxes and royalty all complete as per building specification and direction of E/I.
64	Providing 19 mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
65	Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
66	Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning, sand papering the wall,scaffolding,curing and taxes all complete as per building specification & direction of E/I.
67	Extra for each coat of cement wash, distemper paint or snowcem over exterior surface for each consecutive floor above first floor including scaffolding etc all complete as per building specification & direction of E/I.
68	Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I.
69	Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M. S. angles as verticals at 1.5 M c/c, and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete.
70	Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coat of anti-corrosive paint, etc. complete as directed by Engineer-in-charge.
71	Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
72	Cement Lead 10 Km (avg.)
73	Sand Lead 36 Km (avg.)
74	Stone Chips Lead 11 Km (avg.)
75	Steel ReinforCement Lead 10 Km (avg.)
76	Bricks Lead 06 Km (avg.)
77	Distribution Network & House Connection60 - 80 Nos. including Platform & Stand post
78	Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
79	Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete.
80	Providing PCCM-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I.
81	Rising Main
82	Manufacture, supply and Delivery offollowing Nominal dia UPVC column pipes including PVC socket (Coupler),
83	65 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
84	80 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
85	Distribution
86	Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
87	63 mm HDPE Pipe
88	50 mm HDPE Pipe
89	32 mm HDPE Pipe
90	20 mm HDPE Pipe
91	Providing and fixing Gun Metal Gate valvewith C I wheel of approved quality(screwed end).
92	80 mm dia.
93	65 mm dia.
94	Providing and supplying High Density Polyethylene(HDPE )fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
95	Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II.
96	For Rising
97	80 mm HDPE Pipe
98	63 mm HDPE Pipe
99	Distribution
100	63 mm HDPE Pipe
101	50 mm HDPE Pipe
102	32 mm HDPE Pipe
103	20 mm HDPE Pipe
104	Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
105	Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
106	Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
107	Elbow 15 mm dia.
108	Reducer Socket 20x15 mm dia.
109	Nipple 15 mm dia.
110	Plain Socket 15 mm dia.
111	Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
112	Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socketall complete as per specification and direction of E/I.
113	15 dia and weight not less than 400 Gm
114	Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I.
115	32 mm dia and weight not less than 700 gms
116	65 mm dia Full way valve
117	50 mm dia and weight not less than 1.5 Kg
118	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.Full way valve chamber
119	Providing brick masonry chamber ofinner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
120	Supplying materials , labours and equipments for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surfaceall complete job, as per approved design, specification and direction of E/I.
121	Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
122	Providing fitting & fixing 32 mm to 50 mm service HDPE saddleall complete job, as per approved design, specification and direction of E/I.
123	Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
124	Cement Lead 10 Km (avg.)
125	Sand Lead 36 Km (avg.)
126	Stone Chips Lead 11 Km (avg.)
127	Steel ReinforCement Lead 10 Km (avg.)
128	Bricks Lead 06 Km (avg.)
129	Galvanised chain link mess Fencing around Solar Panel where bore well is away from tower
130	Making 30 cm( 12"") dia bore up to 4m below ground with hand auger of approved quality in ordinary soil (vide classification of soil item-A) true to plum and without eccentricity in any stage of operation and disposal of the exacavated eartrh up to 50m lead including all lifts all complete as per approved design and direction of E/I.
131	Providing P.C.C.M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening,mixing cement concrete in mixer and placing in position, vibrating, curing,taxes and royalty all compelete as per building specification direction of E/I.
132	Labour cost offitting and fixing Galvanised chain -link mess up height of 2 Mincluding cost of staples (but excluding the cost of cement concrete angle iron posts,its cutting and making holes,nuts and bolts) all complete as per specification and direction of E/I.
133	Drilling 6 mm dia holes in M.S Angle iron for fixing of stables etc.as per building specification and direction of E/I.
134	Labour for cutting of M.S Angle iron posts to required length,one end splitted as fish tailed in a length of 150 mm compelete as per building specification and direction of E/I.
135	Supplying,fitting and fixing straining bolts with nut size 22cm*10mm dia tighten the barbed wire with corner post compelete as per building specification and direction of E/I.
136	Supplying,fitting and fixing Galvanised chain -link mess having 3 mm thick wire cell type 40 x 40 mm fitted onM.S. angle frame with two diagonals having 25 x 25 x 5 mm size angleincludingcost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in angle post,,applying a priming red lead paint over steel work,taxesexcluding the cost of Galvanised chain -link mess all complete.
137	Cost of Galvanised chain -link mess having 3 mm thick wire cell type 40 x 40 mm wt not less than 3.1 kg / Sq m
138	Cost of 50 x 50 x 6 mm M.S. angle
139	Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
140	Cement Lead 10 Km (avg.)
141	Sand Lead 36 Km (avg.)
142	Stone Chips Lead 11 Km (avg.)
143	Steel ReinforCement Lead 10 Km (avg.)
144	Annual Operation & Maintenance cost based on Existing D/T Well with solarmotor pump for 5 years
145	O & M Cost for 1st year (Excluding Repair Charges)
146	O & M Cost for 2nd year with Annual Repair Charges
147	O & M cost for 3rd Year
148	O & M cost for 4th Year
149	O & M cost for 5th Year
150	Provision of one no SIM card & its recharging cost for RMC
151	18% GST
152	Labour cess