Tender For Back Side Grill Extension Of 62 Nos. Of F Type Quarters Of Hhep, Burla
Tender Value
98.09 Lakhs
Estimated cost
Bid Submission
21 Jun 2023
0 days left
EMD
98100
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
burla → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Back Side Grill Extension Of 62 Nos. Of F Type Quarters Of Hhep, Burla
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing brick of stone masonry in cement mortar including stacking the useful materials for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge |
| 2 | Dismantling and removing 2.5cm thick artificial stone flooring including stacking the useful materials for reuse and removign the debris away from work site with all leads and lifts as per direction of Engineer-in-charge |
| 3 | Earth work excavation in ordinary soil in embankments, roads etc within 50 mtrs initial lead and 1.5mtrs initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.30 mtrs in depth alongwith proper compaction by PRR including hire & running charges of PRR including mechanical carrriage of 5km and as per direction of Engineer-in-charge |
| 4 | Supply and filling in foundation and plinth wih sand watered and rammed including the cost, conveyance, royalty, all other taxes and labour charges etc complete as per direction of Engineer-in-charge |
| 5 | Cement concrete (1:3:6) with 4cm size hard granite metal including the cost, conveyance, royalty, all other taxes and labour charges etc complete as per direction of Engineer-in-charge |
| 6 | Cement concrete (1:2:4) with 12mm size hard granite chips including the cost, conveyance, royalty, all other taxes and labour charges etc complete as per direction of Engineer-in-charge |
| 7 | Fly ash brick masonry in cement mortar (1:4) using fly ash brick having crushing crushing strength not less than 75kg/cm2 with dimensional tolerance of +/-8% after immersing the bricks in water for six hours before using foundation and plinth including hoisting, placing in position, watering, curing to required time etc including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete as per direction of Engineer-in-charge |
| 8 | 20mm thick cement plaster (1:4) in finished smooth to inside / outside rough surface of walls after racking out the joints including watering curing to required time, cost, conveyance, royalties, taxes of all materials, cost of all labour with T&P required for the work complete etc as per direction of Engineer-in-charge |
| 9 | 2.5cm AS flooring with CC (1:2:4) includign punning using 12mm HG chips and including cost of materials, conveyance, royalty, taxes and cost of labour with T&P required etc complete as per direction of Engineer-in-charge |
| 10 | Priming one coat with any approved primer (water based) on plastered suface after cleaning the surface, sand papering etc including cost, conveyance, royalties, cost of all labour with T&P required for the work complete as per direction of Engineer-in-charge |
| 11 | Wall painting two coats with weather seal coat paint of any approved shade over the exterior surface of walls including cost, conveyance, royalties, taxes of all materials, cost of labour with T&P required for the work complete as per direction of Engineer-in-charge |
| 12 | Distempering two coats with oil bound distemper of any approved shade over the interior surface of walls including cost, conveyance, royalties, cost of labour with T&P required for the work complete as per direction of Engineer-in-charge |
| 13 | Iron works wrought and put up in grated doors, windows and cage latrines including welding etc complete as per direction of Engineer-in-charge |
| 14 | Labour for fitting and fixing of MS gates / wooden door with frame as per approved design including cost of all materials complete but excluding cost of MS gates / wooden door with frame and fittings as per direction of Engineer-in-charge |
| 15 | Iron work wrought and put up in trusses and record raks including all cost of labour, T&P etc complete as per specification and direction of Engineer-in-charge |
| 16 | Hoisting joists and trusses and placing in position (Labour only) as per direction of Engineer-in-charge |
| 17 | Providig and fixing GCI sheets in roof drillign hole in wind ties including fixing of ridges, valleys, wind ties etc excluding cost of fitting as per direction of Engineer-in-charge |
| 18 | Priming one coat with any approved primer on iron work after cleaning the surface, sand papering etc including cost, conveyance, royalties, taxes of all materials, cost of all labour with T&P required for the work complete as per direction of Engineer-in-charge |
| 19 | Painting two coats any approved shade of paint on new iron work after cleaning the surface, sand papering etc including cost, conveyance, royalties, taxes of all materials, cost of all labour with T&P required for the work complete as per direction of Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Jun 05, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 21, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender