Furnishing Work Tender For Furnishing Work Of Hatigaon Branch Under Ro Guwahati => Limited 1 Tables ( 26 Height ) P / F Tables Of Over All Size Of Top As Mentioned. It Shall Consist Of 19Mm Thk. . Ply On Top And Sides With Suitable Box Type Design In Front And Back Part As Per The Detail Drawings. The Front Side Of The Table Shall Consist Of 19Mm Thick Ply. 1Nos Of Drawer Unit Of Size 16 ( Wide ) Fixed On Telescopic Channel And A Shelf With Shutter Above 4 Skirting To Be Provised With Individual Locks. The External Surface Of The Table To Be Finished In 1.0 Mm. Thk. Laminate ( Suede Finish ) Of Approved Make And Shade As Per The Architects Design; Also The Inner Surface Including Drawer To Be Finished With With Paint Over Wood Primer And Putty. Each Top Should Be Provided With 3 Dia Pvc Wire Manager Of Approved Quality Near The Cpu / Monitor Position. Rate Shall Also Include The Provision Of Locks Of Godrej Make Or, Equivalent 4 Ss Handles, Cpu Trolley, Keyboard Tray In Ply With Laminate Finish ( 1.0Mm Thick ) , Foot Rest ( Finisehd With Lamiate ) , Placing , Fixing At Site , Transportation Etc. Complete. I Of Size: 6Lx26W ( For Branch Manager ) Nos 1.0 Ii Of Size: 5Lx23W ( For Officer ) Nos 1.0 Iii Of Size: 46LX30W ( For Continuous Counter ) Rft 27.0 2 Cash Counter Without Side Partition & Door ( 46X70 ) Nos 1.0 Tender For Carpentry Works Of Union Bank, Hatigaon Branch, Guwahati, Assam ( Under R.O: Guwahati ) Contractors Seal N Sign The Overall Height Of The Cash Counter Shall Be 70 From Floor Finish Level ( Ffl. ) . Providing And Laying Cash Counter Of Over All Size Of Top As Mentioned Or As Per The Drawing.. It Shall Consist Of 19Mm Thk. . Ply On Top And Sides With Suitable Box Type Design In Facia With 14 Transaction Ledge Facility On Top At 310 Ht. To Be Supported On The Partition As Per The Detail Drawings. The Front Side Of The Table Shall Consist Of 19Mm Thick Ply As Per The Design. 2Nos Of Drawer Unit Of Size 16 ( Wide ) Fixed On Telescopic Channel And 1 No Of Shelf With Shutter Above 4 Skirting To Be Provised With Individual Locks. The External Surface Of The Table To Be Finished In 1.0 Mm. Thk. Laminate ( Suede Finish ) Of Approved Make And Shade As Per The Standard Design Of The Bank; Also The Inner Surface To Be Finished With With Paint Over Wood Primer And Putty. The Facing Edges Of All Ply Wood Sections Should Be Either Provided With Steam Beach Lipping Finished With Melamine Or Edge Tape. Each Top Should Be Provided With 3 Dia Pvc Wire Manager Of Approved Quality Near The Cpu / Monitor Position. Rate Shall Also Include The Provision Of Locks Of Godrej Make Or, Equivalent 4 Ss Handles, Cpu Trolley, Keyboard Tray In Ply With Laminate Finish ( 1.0Mm Thick ) , Foot Rest ( Finished With Laminate ) , Placing , Fixing At Site , Transportation Etc. Complete.12Mm Thick Toughened Glass With Frosted Film Paper And With Proper Provision Of Glass Cuts For Transaction And Audibilty Of Customers ( As Per Design ) To Be Provided / Fixed Above The Customer Transaction Top / Ledge Of The Cash Counter Till 70 Ht. From Ffl With Neccessary Support From Side Partition With S.S. Finished Dbracket In Concealed Manner. The Exposed Edges Of Glass To Be Mirror Polished. 3 Full Ht Solid Partition In Laminate Finish ( 7Or Above Height ) Sft 324.0 P / F Full Height Partition, The Framing Shall Consist Of Aluminium Square Of Size 50Mm Having Wall Thickness 1.20Mm @ 600Mm C / C Both Ways Horizontally And Vertically With Necessary Support From The Rcc / Pucca Ceiling. The Framing Shall Be Covered With 6 Mm Thk. Ply On Both Side And Finished With 1.00 Mm Thk. Laminate Of Approved Shade. Rate Shall Be Inclusive Of Necessary Hardware Items, Etc. Complete. 4 Full Ht Partly Glazed Partition ( 8 Ht ) Sft 134.0 Specification Same As Above ( Full Ht Solid Prtition ) But With 6Mm Thick Clear Glass To Be Fixed Above 3 Till Door Height With Teak Wood Patti As Per Design. All Exposed T.W. Surfaces To Be Finished In Melamine Polish Of Matching Laminate Colour As Directed. Rate Shall Be Inclusive Of All Necessary Hardware Items, Transportation Etc. Complete. Contractors Seal N Sign 5 Full Ht Partly Glazed Side Partition For Cash Counter ( 10Mm Thk Toughened Glass ) Sft 119.0 Specification Same As Above But With 10Mm Thick Toughened Glass To Be Fixed Above 3 Till Door Height / With Teak Wood Patti As Per Design And With Proper Provision Of Glass Cuts For Voucher / Receipt Transaction. All Exposed T.W. Surfaces To Be Finished In Melamine Polish Of Matching Laminate Colour As Directed. Rate Shall Be Inclusive Of All Necessary Hardware Items, Transportation Etc. Complete. 6 Semi Ht. Semi Glazed Partition Sft 56.0 P / F 4 Height Partition, The Framing Shall Consist Of Aluminium Square Of Size 50Mm Having Wall Thickness 1.20Mm @ 600Mm C / C Both Ways Horizontally And Vertically. The Framing Shall Be Covered With 6 Mm Thk. Ply On Both Side And Finished With 1.00 Mm Thk. Laminate Of Approved Shade With 10Mm Thk Approved Make Polished Glass As Per The Drawing. Rate Shall Be Inclusive Of Necessary Hardware Items, Etc. Complete. 7 Semi Ht. Solid Partition In Laminate Sft 8.0 Specification Same As For Full Ht Solid Partiton Above But Of Low Ht As Per The Drawing. Rate Shall Be Inclusive Of Necessary Hardware Items, Etc. Complete. 8 Full Ht Fully Glazed Partition With 12Mm Thick Toughened Glass In Path Fitting For Entrance ( Make: Ebco / Hardwyn Or Equivalent ) Sft 26.0 P / F Fully Glazed Frameless Partition With 12Mm Thick Toughened Glass With Necessary Patch Fittings & Support From Wall / Floor / Partition / Ceiling As Per The Site Condition. The Rate Shall Be Inclusive Of Required Wooden Or Aluminium Support From Ceiling At The Same Level Of Gypsum Ceiling, Hardware Items, Etc. Complete. 9 Glazed Partitions Over Worksatations Sft 50.0 P / F Glazed Partition As Per Approved Design Of 12Mm Thk Clear Glass Mirror Polished Fixed With S S D Clips And Grove Made On Mullion Box / Partition As Per Design Or As Directed By The Architect. Rate Shall Be Inclusive Of Necessary Ply Support / Mullion Post ( As Per Design ) Raised To Support The Structure, Hardware Items Etc. Complete. 10 Single Skin Panelling On Wall / Column / Ceiling Laminate Finish Sft 360.0 Contractors Seal N Sign P / F Panelling On Wall With 12Mm Thk. . Ply Finished In Approved 1.0 Mm. Thk. Laminate. The Rate Shall Be Inclusive Of Leveling The Surface Upto 2 ( As Per The Site Condition ) From The Existing Wall / Column By Using 19Mm Thk . Ply Framing. Note: Architects Approval Is Required For Panelling Other Than On Columns In Banking Hall, Without Prior Approval, No Bill For The Same Shall Be Entertained ) 11 Single Skin Panelling On Vantilators ( Without Covering Material ) Sft 80.0 P / F Panelling On Wall With 12Mm Thk. . Ply . The Rate Shall Be Inclusive Of Leveling The Surface Upto 2 ( As Per The Site Condition ) From The Existing Wall / Column By Using 19Mm Thk . Ply Framing. 12 Panelling On Wall In Acp Finish For Atm Sft 0.0 Providing And Fixing Panelling On Wall. Framing Shall Consist Of Aluminium Sections Of 2X1 @ 600Mm C / C Both Ways Horizontally And Vertically On The Wall / With As Directed By Bank / Architect. This Framing Would Be Covered With 4Mm Thick Aluminium Composite Panel As Per Banks Standard Theme. The Rate Shall Inclusive Of Necessary Fixtures And Fittings, Sealant Etc. Complete Make: Aludecor Or Eurobond 13 Main Entrance Door With 12Mm Thick Toughened Glass In Path Fitting ( Make: Ebco / Hardwyn Or Equivalent ) ( For Bank & Atm ) Sft 23.0 P / F Single Leaf Fully Glazed Frameless Door On Floor Spring ( Weight Capacity Upto 100 Kg ) And Pivot With Necessary Fittings For The Entrance Door As Per The Manufacturers Specification. The Glass Thickness Should Be 12 Mm Thk. Rate Shall Include Floor Springs, A Pair Of Handles 18 Ss Brushed Finished Etc With Necessary Hardware Items. 14 Solid Doors- In Laminate Finish ( With Or With Out Vision Panel As Per Direction Of Bank / Architect ) ( Door Cloaser Make: Everite / Hardwin / Everest / Equivalent ) Providing And Fixing Solid Doors Of Sizes As Shown In The Drawing With 30Mm Solid Flush Door Finished With 1.0 Mm Thick Approved Laminate On Both Sides. Rate Shall Include Mortise Lock ( Godrej Make ) , Floor Springs / Door Closure ( As The Case May Be ) , Door Stopper, 5 Hinges 4 Nos., Buffers, Etc With Necessary Hardware Items And With / Without Door Frames ( Frame Size:4X6 Of 1St Class Sal Wood ) As Mentioned. Contractors Seal N Sign I Without Door Frame ( For Ups Room, Back Office Entrance With Door Closer ) Sft 70 Ii With Door Frame Sft 25 15 Partly Glazed Doors - With Out Frame Sft 36.0 P / F Doors Of Sizes As Shown In The Drawing. The Door Shutter Shall Be Of 30Mm Thick Flush Door Of Approved Make With For 6Mm Thk Approved Make Clear Float Glass Shall Be Provided At 30 From Ffl. Or As Per The Design With Teak Wood Patti As Per Design. All Exposed T.W. Surfaces To Be Finished In Melamine Polish Of Matching Laminate Colour As Directed. The Door Shutter Shall Be Finished In 1.0Mm Thk Laminate On Both Sides. Rate Shall Include Mortise Lock ( Godrej Make ) , Floor Springs / Door Closure ( As The Case May Be ) , Door Stopper, 5 Hinges 4 Nos., Buffers, Etc With Necessary Hardware Items. 16 Cash Counter Doors With Night Latch ( Make: Godrej / Doorset / Equivalent ) Sft 16.5 P / F Solid Doors Of Sizes As Shown In The Drawing. The Door Will Be Provided With Aluminium Powder Coated Louvers Of Sixe 6X18 Above 12 From Ffl.. The Doors Are Also To Be Provided With Godrej Night Latch. The Door Shutter Shall Be Of 30Mm Thick Flush Door Of Approved Make And Finished With 1.0Mm Thick Approved Laminate On Both Sides. Rate Shall Include Night Letch, A Pair Of Handles 5 Ss Brushed Finished, 5 Hinges 2 Nos., Buffers, Tower Bolts, Etc Withnecessary Hardware Items. 17 Low Hight Doors Sft 12.0 P / F Solid Doors Of Sizes As Shown In The Drawing. The Door Shutter Shall Be Of 30Mm Thick Flush Door Of Approved Make And Finished With 1.0Mm Thick Approved Laminate On Both Sides. Rate Shall Include Pair Of Handles 5 Ss Brushed Finished, 5 Hinges 2 Nos., Buffers, Tower Bolts, Etc Withnecessary Hardware Items. 18 Low Ht Continuous Storage ( 18 Wide ) ( Side / Back Storage ) With Locks Sft 120.0 Contractors Seal N Sign P / F Low Ht Storage Unit Of Sizes As Mentioned Above. They Shall Consist Of 19Mm Thk Plywood For Top, Base And Sides And Back 6Mm Thk Plywood, 19Mm Thk Plywood Shutter. The Base Of The Storage To Be Raised 4 From Ffl. All External Surfaces Shall Be Finished With 1.0Mm Thk Laminate Of Approved Shade And Make.Divisions Of The Shutter Shall Be Made Equally According To The Length Of The Storage. A 19Mm Thk Fixed Ply Wood Shelf On Battens Shall Be Provided @16 Intervals From The Base. All Inner Surfaces Including Shutters Shall Be Finished With With Paint Over Wood Primer And Putty. Rates Shall Be Inclusive Of All Necessary Approved Fittings Like Hinges, Locks, 3 Long Brushed Finish Handle, Tower Bolts And Any Other Misc Hardware Items Of Approved Make. 19 Full Height Storage With Shutter With Locks Sft 80 Providing And Fixing In Position Full Height Storage Using 19Mm Thk Plywood For Top, Base And Sides And Back 6Mm Thk Plywood, 19Mm Thk Plywood Shutter. The Base Of The Storage To Be Raised 4 From Ffl. All External Surfaces Shall Be Finished With 1.0Mm Thk Laminate Of Approved Shade And Make.Divisions Of The Shutter Shall Be Made Equally According To The Length Of The Storage. A 19Mm Thk Fixed Ply Wood Shelf On Battens Shall Be Provided @16 Intervals From The Base. All Inner Surfaces Including Shutters Shall Be Finished With Paint Over Wood Primer And Putty. Rates Shall Be Inclusive Of All Necessary Approved Fittings Like Hinges, Locks, 3 Long Brushed Finish Handle, Tower Bolts And Any Other Misc Hardware Items Of Approved Make. 20 Gypsum Board False Ceiling Contractors Seal N Sign P / F Gypsum Board False Ceiling Straight Or Curve Any Profile Of Reputed Make Which Includes G.I. Perimeter Channels Of Size 0.55Mm Thick ( Having One Flange Of 20Mm And Another Flange Of 30Mmand A Web Of 27Mm ) Along With Perimeter Of Ceiling, Screw Fixed To Brick Wall / Partition With The Help Of Nylon Sleeves And Screws At 610Mm Centres. Then Suspending G.I. Intermediate Channels Of Size 45Mm ( 0.9Mm Thick With Two Flanges Of 15Mm Each ) From The Soffit At 900Mm Centres With Ceiling Angle Of Width 25Mm X 10Mm X 0.55Mm Thick Fixed To Soffit With G.I. Cleat And Steel Expansion Fasteners. Ceiling Section Of 0.55Mm Thick Having Knurled Web Of 51.5Mm And Two Flanges Of 26Mmeach With Lips Of 10.5Mm Are Then Fixed To The Intermediate Channel With The Help Of Connecting Clips And In Direction Perpendicular To The Intermediate Channel At 457 Mm Centres 12.5Mm Tapered Edge Gypboard ( Conforming To Is 2095- 1982 ) Is Then Screw Fixed To Ceiling Section With 25Mm Dry Wall Screws At 230Mm Centres. Screw Fixing Is Done Mechanically With Drilling Machine With Suitable Attachment. Finally Tapered Edges Of The Gypsum Boards Are To Be Jointed And Finished So As To Have A Flush Look Which Includes Filling And Finishing With Jointing Compound, Joint Paper / Fibre Tape And Two Coats Of Dry Wall Top Coat Suitable For Gypsum Board Etc. Complete As Per The Recommended Practices / Specifications Of The Manufacturer. Including Making Necessary Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitable Fixed All Complete As Per Drawing And Specification And Direction. I For Plain Area Sft 496.0 Ii For Ceiling Drop Rft 232.0 Iii For Tray Light Including Ceiling Drop Rft 0.0 21 Mineral Fibre Grid Tile Ceiling Sft 544.0 Contractors Seal N Sign Mineral Fibre Acoustic Ceiling Tiles : Providing, Making & Fixing At All Heights & In Spirit Level, Acoustical Ceiling System @ Office Areas With Armstrong, Gyproc Or Equivalent Make Mineral Fibre Acoustical Suspended Ceiling System As Per Manufacturer’S Specification With Pin-Hole Tiles, Tegular Edge With 24 Mm Exposed Grid. The Tiles Should Have Colour White, In Module Size Of 600Mm X 600Mm X 15Mm. With Providing And Fixing Hot Dipped Galvanised Steel Suspension System Grid Frame With Butterfly Clips, For Laying Of Acoustical Ceiling Tiles As Per Manufacturer’S Specifications. The Grid Should Be Laid On Armstrong / Gyproc Or Equivalent Stitched True Lock 24 Tl Exposed Grid Systems With 24 Mm Wide T-Section Flanges Color White, The Tile Will Be Laid On Frame Work Made Of Armstrong Prelude 32 With 24 Mm Wide T - Section Flanges Or Of Equivalent Make, Colour White Having Rotary Stitching On All T Sections I.E. The Main Runner, 1200 Mm & 600 Mm Cross Tees With A Web Height Of 32 Mm And 27Mm , 25 Mm Respectively. The Cost Shall Include All Fittings And Materials Complete Including Proper Installation And Provisioning Etc. The Work Is To Be Completed As Per Manufacturer’S Specification 22 Pop On Gypsum Ceiling And Wall Sft 3800.0 P / A One Coat Of Birla Wall Care Putty ( Water Resistant White Cement Based Putty For Concrete / Mortar Walls And Ceilings Both Internal And External ) After Removing All Loosely Adhering Material From The Wall Surface With The Help Of Emay Stone, Putty Blade Or Wire Brush And Moisturing The Wall With Sufficient Quantity Of Clean Water As Specified And Directed By The Department. Thickness 1.00 Mm 23 Plastic Emulsion ( On Wall+ Ceiling ) Sft 3800.0 P / A Plastic Emulsion Paint ( Base Colour ) On Ceilings. The Rates Shall Include Scrapping, Levelling & Preparing The Surface. Primer Coat + ( Minimum ) 2 Coats To Get Evenly Spread Quality Finish ( Roller Finish ) Of Approved Make, Quality And Finish Shall Be Provided. Note- Rates Shall Also Include - Filling Up The Cracks In The Wall & Ceilings, Making Good Surface . 24 Etching Glass With Frosted Film Paper Sft 140.0 Contractors Seal N Sign Providing & Fixing Frosted Film Fixed On The Glass After Cleaning And Wiping Glass Surfaces Free Of Any Dust Or Foreign Bodies And Then Fixed Plain Approved Pattern / Design Film On The Glass As Per Detail Drawing Inclusive Of Making Necessary Cutouts, Carting Away Unserviceable Materials Out Of Compound, Cleaning The Site Etc. Complete As Per The Site Requirements And The Instructions Of The Architect. ( Basic Cost Of Film Not Less Then Rs.60 / - Per Sft ) . ( Measurement Area = Length X Height ) 25 Writing Ledge 1- 3 Wide As Per Design Rft 4.0 P / F Wall / Column Fixed Writing Ledge As Per Design. The Top And Sides Of The Table Shall Consist Of 19Mm Thick Ply And Its Back With 12Mm Thick Ply As Per The Design. It Should Also Have The Provisions Of Open Selves Of Size 6 On Top For Vouchers And Slips. The Exposed Inner Or Outer Faces Should Be Finished With 1.0Mm Thick Approved Laminate. 26 Boxing For Rolling Shutter Sft 64.0 P / F Boxing For Rolling Shutter With 19Mm & 12Mm Ply. Necessary Wooden Framing Shall Be Provided To Support The Structure With A Openable Shutter Of 5 Opening For Smooth Operation Of Shutters And Rest Is Closed With Mirror Screws ( For Opening And Servicing ) .. The Boxing Shall Be Finished On All Exposed Sides By 1.0Mm Thk Laminate. 27 Vertical Blinds With Scotch Guard ( Vista Make Or Equivalent ) Only In Banking Hall Sft 288.0 P / F In Place 100 Mm. Vertical Blinds Of Approved Make, Quality And Colour Shade & Pattern. Rate Shall Include Necessary Scotch Guard Treatment On Both Sides. The Overlaps Should Be Uniform & Adequate. 28 Pin-Up Boards / Notice Boards Sft 12.0 P / F Pinup Or Notice Boards With Hidden Wall Hanging Provision. It Consist 12Mm Thick Soft Boards Of Good Density To Be Mounted Over 12Mm Thick . Ply As Where Required. The Soft Board Will Be Covered With A Plain Fabric ( Appox Rs.250 / Rmts. Of Approved Colour ) From Front And Edges. Suitable Border With 12Mm Thick Plywood Of Size 2.5 To 3 To Be Fixed On All Four Sides And The Same To Be Finished With 1.00Mm Thick Laminate Of Approved Shade. 29 Cheques Drop Box ( 1 W X 10 D X 1.5 H ) Nos 1.0 Contractors Seal N Sign P / F Cheque Drop Box With Hidden Wall Hanging Provision Made Of 19Mm Thick Board With Slit Opening Of At The Top Of The Box And An Openable Shutter With Lock Facility At The Front Side. All The Exposed Surfaces Including All Free Edges Are To Be Finished With 1 Mm Thick Laminate Of Approved Make And Shade. Inner Faces Of Board Surfaces Are To Be Finished With Minimum Two Coats Of Synthetic Enamal Paint Of Approved Shade And Quality Over A Coat Of Approved Primer.Rate To Include Cost Of Necessary Hardware Fittings E.G. Brass Hinges, Lock, Knob Etc. Of Approved Designand Quality. 30 Suggestion Box ( 1 W X 10 D X 1.5 H ) Nos 1.0 P / F Suggestion Box With Wall Hanging Provision Made Of 19Mm Thick Board With Slit Opening Of At The Top Of The Box And An Openable Shutter With Lock Facility At The Front Side. All The Exposed Surfaces Including All Free Edges Are To Be Finished With 1 Mm Thick Laminate Of Approved Make And Shade. Inner Faces Of Board Surfaces Are To Be Finished With Minimum Two Coats Of Synthetic Enamal Paint Of Approved Shade And Quality Over A Coat Of Approved Primer.Rate To Include Cost Of Necessary Hardware Fittings E.G. Brass Hinges, Lock, Knob Etc. Of Approved Designand Quality. 31 Plastering ( Additional Plastering / Repairing, Patch Up Works ) Sft 200.0 Providing & Applying Cement Sand Plaster For Both Exterior Or Interior Of Building In 1:4 Proportion To Existing Brick / Rcc Walls, Chhajjas & Ceilings In Single Coat Of Avg. ¾” Thk. The Work Shall Include Remving Of Old / Existing Plastering From Damped Wall. Finished Rough To Receive Plaster Of Paris Levelling Coat. The Rate Shall Include Necessary Scaffolding, Curing Etc. Complete. 32 Brick Work With 5X6 R.C.C. Lintels Above 7 Height S.Ft 32.0 Constructing 6” Thk. Brick Wall In 1:6 Cement Mortar. Brick Used Shall Be Of Best Quality Kiln Burnt, Having Sharp Edges & Giving Clear Ringing Sound When Struck Against Each Other. The Rate Shall Be Inclusive Of Plastering The Walls With ¾” Thk. 1:4 Cement Plaster On Both Sides, R.C.C. Lintels At 7 Height With 4Nos Of 10Mm Dia Reinforcement Bars And 6Mm Dia Coil At 6 C / C. The Rate Shall Be Inclusive Of Any Scaffolding Required, Shuttering Ply, Curing Etc, Complete. 33 Wall Tiles ( 3 Ht Above Pantry Counter ) S.Ft . 42.0 Contractors Seal N Sign Providing And Fixing 12 X 18 Approved Plain Shade Of Wall Tiles As Per Pattern For Dado From Ffl Using Cm 1:4 In Proper Line And Level As Directed By The Bank / Architect As Shown In The Drawings. The Rate Shall Include Surface Preparation By Removing Exsting Cemented Polish Or Wall Tiles, Necessary Backing Material, Nosing For Edges, Waterproofing And Joint Filling Compound Of The Same Shade As That Of The Ceramic Tiles. All Sanitary Fittings Shall Be Located On The Joints Or Junctions Of The Tiles. 34 Pantry Platform In Jet Black ( With Sink & Cock ) R.Ft . 6.5 Providing And Laying Platform Of 21” Width ( Clear ) And At 2’-8” Height ( Top ) Above Ffl Of Approved 20 Mm Thick Granite With Bull Nosed Edges. It Shall Be Supported On 18 Granite Verticals. The Edges Of The Granite Touching Brick Wall To Be Supported On The Same Wall By Cutting The Wall Upto 1.5. A 2” Granite Facia Should Be Provided Below The Bull Nosed Edge Of Granite Platform. Rate Shall Be Inclusive Of Making Cutouts And Polishing The Edges For 18 X 18 S. S. Sink. A Flexible Pipe From Sink To The Nahni Trap Shall Be Provided. Rate Shall Also Include Minor Plumbing Work Required For Water Inlet And Waste Water Drain Out Provision, One C P Swan Neck Tap And Any Other Hardware Fitting Required Complete. 35 Iron Door S.Ft 21.0 Supplying, Fitting And Fixing Door With 3Mm Thick M.S. Plate Fixed Over 25Mmx5mm Thick Flat Bars At Not More Than 12 C / C Intervals. The Rate Shall Be Inclusive Of Oor Frame Made Of M.S. Equal Angle Of Size 40Mmx40mmx5mm Fabricated, Welded, Mitred And Joined As Per Relevant I.S. Codes Including Fitting 8 Nos. Of M.S. Hold Fast, Providing Closing / Holding Device For 2 Nos. Tower Bolts Of Door For Each Side And 1 No. For Fitting And Fixing Aldrop ( For Single Leaf ) To The Frame For Fixing The Door To The Frame, Applying Primer To All Steel Surfaces Fixing The Frame To The Wall / R.C.C. Members By Embedding The Hold Fast Securely In C.C. Block Of M-15 Grade Complete At All Levels Asspecified And Directed Complete. 36 Dismantling Of Existing Partition, Doors, Counters Etc Including Removal Of Debris From Site. ( Ls Area 1500 Sft ) Ls 1.0 Contractors Seal N Sign 37 Providing Temporary Seating Arrangements For Banks Staff ( Total 8Nos ) Including Cash Counter For Smooth Functioning Of The Bank During Banking Hours At The Time Of Renovation Work. Note: The Temporary Arrangement Period Shall Include Not Only Carpentry Works But Also Civil Works / Floor Tile Work ( The Work Contract Of Carpentry & Civil Works May Or May Not Be Alloted To The Same Contractor As Per The Decision Of The Bank / Through Tender Process ) . Ls 1.0 38 P / F Key-Box ( Size:2 X 2 ) With Wall Hanging Provision Made Of 19Mm Thick Board With An Openable Shutter Made Out Of Glass With Lock Facility At The Front Side. The Provision Of Hanging Key To Be Provided On The Face Of The Box With J-Hook At An Spacing Of 2 Horizonally & 3 Vertically. All The Exposed Internal & External Surfaces Including All Free Edges Are To Be Finished With 1 Mm Thick Laminate Of Approved Make And Shade. Rate To Include Cost Of Necessary Hardware Fittings E.G. Brass Hinges, Lock, Knob Etc. Of Approved Designand Quality. Ls 1.0 Sub-Total Of Interior Works ( Without Gst ) Buy-Back ( Quoted Price To Be Deducted From The Total Amount ) Buy Back Of Existing Partitions, Tables, Counter, False Ceiling, Glass Etc. ( Only Furniture Items Excluding Chairs ) With The Concern Of The Bank. Ls -1.0
