Military Engineer Services-MES has published Tender For Repair/ Replacement / Maintenance Of Summer / Winter Appliances Under Age E/M (Es) At Ge (U) Meerut Cantt.. Submission Date for this Tender is 24-06-2023. Air Conditioner Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-06-2023 |
| Sl. No. | Item Description |
| 1 | WATER COOLER |
| 2 | Cleaning of water cooler tank with Potassium permanganet solution after removing all dust, mud particles complete all as specified. |
| 3 | Repairing the water cooler storage tank of stainless steel or any other metal by providing welding, brazing/solderingand making the tank leakage proof complete all as specified and directed. |
| 4 | M&L for renewal of sealed unit Compressor for 40/80 to 120/180 ltr capacity wiith necessary brazing work to make the system leak proof complete all as specified and directed. |
| 5 | M&L for Checking of leakage in refrigerant system ofwater cooler of any capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging with 134 Floron refrigerant gas in required quantity all as directed by Engineer-in-Charge . |
| 6 | Renewal of relay set consisting overload protectorsuitable for water cooler compressorany capacity all as directed by Engineer-in-Charge. |
| 7 | Renewal of condenser fan motor single phase, with blade,1/35 HP to 1/10 HP capacity including moutning clamps, bushes, nuts, bolts and washers of water coolercomplete all as specified and directed. |
| 8 | Renewal of Liquid line filter for water cooler of any capacity all as specified and directed. |
| 9 | Renewal ofthermostat for water coolerall as directed by Engineer-in-Charge. |
| 10 | Renewal ofBrass CP push cock 15mm bore with brass flex nipple complete all as specified. |
| 11 | Renewal of 32 mm bore PVC flexible pipe complete all as specified and directed. |
| 12 | DEEP FREEZER |
| 13 | Replacement of renewal of harmertically sealed unit Compressor of 320/500 litres capacity DEEP FREEZER of make LG/Videocon/Bluestar/Carrier dulyincluding necessary brazing work to make the system leak proof complete all as specified and directed. |
| 14 | REFRIGERATOR |
| 15 | M&L for renewal of hermertically sealed unit Compressor of 315/320 litres capacity Refrigerator of make LG/Videocon/Whirlpool/Voltas dulyincluding necessary brazing work to make the system leak proof complete all as specified and directed. |
| 16 | M&L for renewal of hermertically sealed unit Compressor of 165/185 litres capacity Refrigerator of make LG/Videocon/Whirlpool/Voltas dulyincluding necessary brazing work to make the system leak proof complete all as specified and directed . |
| 17 | M&L for Checking of leakage in refrigerant system ofrefrigerator and deep freezerof any capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging with 134 Hydro Carbonrefrigerant gas in required quantity all as directed by Engineer-in-Charge . |
| 18 | Renewal of Liquid line filter for refrigerator of any capacity all as specified and directed. |
| 19 | S&Ffor renewal PVC bottle guardsuitable for 165 to 310 Ltr. |
| 20 | S&Fin replacement chilled tray plastic for suitable for any make/ any model/ any capacity refrigerator |
| 21 | S&Ffor renewaltimer switch for suitable for any make/any model/any size |
| 22 | Renewal of starting relay, open type for refrigerator of any capacity all as directed by Engineer-in-Charge. |
| 23 | M&L for painting to refrigerator 310/30/316/165 LTR by scraping the old paint and applying one coat of red oxide as primer and applying two coats of synthatic paint of approved colour including writing SMNo all as directed. |
| 24 | Renewal of over load protector for refrigerator of any capacity all as directed by Engineer-in-Charge. |
| 25 | Renewal ofthermostat with knob defrost type/ non defrost type for refrigerator all as directed by Engineer-in-Charge. |
| 26 | Renewal of freezer cabinet with door comprising spring suitable for following capacityrefrigeratorcomplete all as specified. |
| 27 | Renewal of condensing coilof any capacityrefrigerator by disconnecting condensing coil from refrigerator, N2 pressure testing and flushing out the system and charging ofNon CFC gas as per required quantity and testing complete all as directed. Note: Refrigerant gas supplied and charged shall be measured and paid separately). |
| 28 | DESERT COOLER |
| 29 | Replacement of defective burnt exhaust kit fan motor of 1/1.5 HP, anysweep and of any makeand transporting tocontactor"s workshop, opening of motor taking out rotor and cutting out the burnt winding and cleaning the slots and rewinding of the same with the existing size of super enameled aluminiumwinding wire including insulation varnishing, greasing, reassembling testing and fixing in position all as directed by EIC. |
| 30 | Renewal of kit fan motor, single phase, 230 volt AC, 1/3 HP, complete with blade arm 20"sweep size, fixing lungs, nuts, bolts and washers suitable for desert cooler all as specified and directed by EIC. |
| 31 | Renewal of submersible miniwater lifting pump, single phase, 230 volt AC, 50 HZ, 1/40 HP ( 18 watts approx) , of 5 meter head all as specified and directed by EIC . |
| 32 | Spray painting of desert cooler body of any size internally and externally after scrapping out the existing paint with one coat of synthetic enamel paint on outer surfaces and one coat ofanticorrosive paint on inner surfaces all as directed by EIC |
| 33 | Renewal of Front grill of Desert cooler of any size of suitable guage complete as directed by EIC. |
| 34 | Renewal of control/ selector switch, 3 speed with knob suitable for desert coolerall as directed by E.I.C |
| 35 | Renewal of wood wool pad suitable for desert coolerall as directed by E.I.C |
| 36 | Renewal of PVC pipe 15mm dia, medium qualityfor desert coolerall as directed by E.I.C |
| 37 | Renewal of desert cooler body of size 1Mx1Mx1.2M, suitable for 450 mm/500 mm sweep exhaust fan /kit, made out of 18gauge PGI sheet and side panels duly filled with Khas khas includingpainting the inner surafces with one coat of anticorrosive paint and outer surfaces with two coats of synthetic enamel paint over a coat of primer, deassembling the fan, pump and its connected fittings, grills, regulator and cable etc.from wornout body and fixing the same in renewed Cooler Body complete all as specified and directe. |
| 38 | Renewal of desert cooler side panels of desert cooler, made out of 22 gauge PGI sheet and side panels duly filled with Khasincludingpainting the inner surafces with one coat of anticorrosive paint and outer surfaces with two coats of synthetic enamel paint over a coat of primer to match with the Body of desert cooler complete all as specified and directe. |
| 39 | VOLTAGE STABILISER |
| 40 | Rewinding of main power transformer of 4 to 5 KVAcapacity Voltage stabilizer , with suitable size of super enamelled copper wire and fixing & testing complete all as specified and directed. |
| 41 | Rewinding of main power transformer of 2 to 3 KVAcapacity Voltage stabilizer , with suitable size of super enamelled copper wire and fixing & testing complete all as specified and directed. |
| 42 | Rewinding of main power transformer of 0.5 to 1 KVAcapacity Voltage stabilizer , with suitable size of super enamelled copper wire and fixing & testing complete all as specified and directed. |
| 43 | Renewal of cut off relay suitable for 0.5 to 5 KVA capacity Voltage stabliser complete all as specified and directed. |
| 44 | Renewal of High/ low cut offwith time delaycircuitsuitable for 0.5 to 5 KVA capacity Voltage stabliser complete all as specified and directed. |
| 45 | Renewal of Printed circuit Board (PCB)suitable for 0.5 to 5 KVA capacity Voltage stabliser complete all as specified and directed. |
| 46 | Renewal of Trigger Transformers suitable for 0.5 to 5 KVA capacity Voltage stabliser complete all as specified and directed. |
| 47 | Renewal of single phase Voltmeter AC, 230 VoltsforVoltage stabliser complete all as specified and directed. |
| 48 | Renewal ofindicator bulb suiatble forforVoltage stabliser complete all as specified and directed. |
| 49 | S&F for renewal of 5 kVA automatic line Voltage stabliser, single phase, naturally air cooled, wall mounted, indoor type, designed to give output voltage 225V +11% at input range between 140 to 280 Volts, with digitally displayed features, high and low cut of range voltage and time relay of 2 to 3 minutes on initial start complete all as specified. |
| 50 | S&F for renewal of 4 KVA automatic line Voltage stabliser, single phase, naturally air cooled, wall mounted, indoor type, designed to give output voltage 225V +11% at input range between 140 to 280 Volts, with digitally displayed features, high and low cut of range voltage and time relay of 2 to 3 minutes on initial start complete all as specified. |
| 51 | GEYSER |
| 52 | M & L Dismantling and removing the existing Geysers of any type, any make, from various lacations of GE (U) Meerut area after disconnecting the water connection, electric connection for repair / painting / replacement of defective parts, opening the geyser assembly and descalling with hydrochloride solution fixing of geyser assembly , cleaning up inner tank including repair of rubber seal, ring nuts, bolts, washers GI bottom cover and other connected works, pressure testing, refixing at it"s original location, connecting complete all as directed (new spares followed below shall be measured and paid seperately, minor spares and consumables like screws, washers, cleaning agents, consumables etc. is deemed to be included in the quoted rate) for the following:- |
| 53 | a)25 Litre |
| 54 | b)50 Litre |
| 55 | S & Fixing only in repairs indicating lamp unit round / rectangular type, suitable for any type, any make geyser, standard quality, AC, 240V, Red or Green, connecting complete all as directed. |
| 56 | S & Fixing only in repairs fusible plug made out of brass with internal or external threading suitable for any type, any make geyser of capacity 25 / 50 Ltrs complete all as directed. |
| 57 | S/F in repairs Inner assembly with heat resistant rubber ring washer incl nuts, bolts, clamps, suitable for any type, any make Geyser, ISI marked, complete all as directed for the following:- |
| 58 | a)25 Litre |
| 59 | b)50 Litre |
| 60 | S & Fixing only in repairs inner tank made out of heavy duty steel sheet, ISI Marked, suitable for any type, any make geyser,for the following capacities complete all as directed for the following:- |
| 61 | a)25 Litre |
| 62 | b)50 Litre |
| 63 | S & Fixing only in repairs Metallic Outer cover including bottom and top cover fabricated out of 24 gauge MS sheetduly painted suitable for any type, any make geyser complete all as directed for the following:- |
| 64 | a)25 Litre |
| 65 | b)50 Litre |
| 66 | M&L for repairs to any type, any make geyser metallic inner tank, arresting the leakage by welding, brazing etc, pressure testing after repairs, complete all as directed for the following:- |
| 67 | a)25 Litre |
| 68 | b)50 Litre |
| 69 | M&L for filling the glass wool between outer cover and inner tank of any type, any make geyser, 50/25 litres capacity, complete all as directed. |
| 70 | M&L for Preparing the surface of any type, any make geyser, removethe existing painting by scraping, cleaning, filling the cavities and applying 2 coats of spray paint with synthetic enamel white paint over a coat of red oxide primer, including writing the MES Nos. all as directed for the following:- |
| 71 | 25 Litre |
| 72 | 50 Litre |
| 73 | M&L for Fabricate and fix, GI bottom cover / inspection plate, suitable for any type, any make geyser, 2 mm thick, split type, duly painted with 2 coats synthetic enamel paint over a priming coat of metallic primer to match with the existing colour all as directed. |
| 74 | M&L for replacement of bottom main terminal, synthetic gasket, fixing clamps suitable for any type, any make geyser complete all as directed. |
| 75 | M & L for making hole in wall, Grouting 4 No"s Rag bolts of size 125mm long x 12mm dia in PCC on wall including suitable nuts and washers for fixing / hanging geysers,complete all as directed. |
| 76 | S/F in repairs Heating element, suitable for any type, any make geyser, 240V, AC, ISI Marked, with heat resistant rubber washer, for the following capacity, connecting complete all as directed for the following:- |
| 77 | a)1.5 KW |
| 78 | b)2.0 KW |
| 79 | S/F in repairs Thermostat control unit suitable for any type, any make 25 / 50 Ltrs capacity geyser, 30-90 degree rating,240V, AC, ISI Marked, connecting complete all as directed. |
| 80 | S/F non-return valve, made out of brass 15mm bore, ISI marked, complete all as directed. |
| 81 | S/F PVC sheathed,PVC insulated multi stranded copper conductor, 3 core, flexible cable, 1100 V grade, 2.5Sqmm, AC, connecting complete all as directed. |
| 82 | S/F Angle cock / valve, cast copper alloy, chromium plated, screwed down, high pressure, 15 mm with CP cup all as directed. |
| 83 | S/F Bib Tap, hot water, cast copper alloy, chromium plated, screwed down, high pressure, 15 mm with CP cup all as directed. |
| 84 | S/F low density polyethlyne pipe 16 mm dia (outer), 600mm long suitable for Hot/Cold water application complete with threaded union, teflone washers on both sides to suit 15 mm dia fittings. Make : waterTec / Pearl |
| 85 | S/F in repair for plug top 3 pin 15 Amps capacity complete all as specified and directed . |
| 86 | Supply onlyZebra fastner of size 12x100 mm complete all asspecified and directed . |
| 87 | S/F in repair modular Power Unit 20A, 3pin, AC, 240V ISI Marked incl FRP Box and 01 No"s 16 Amps MCB SP all as specified.. |
| 88 | S/F in repair SPN metallic enclosure with a two pin and earth plug and socket with one MCB SP 25 Amps all as directed. |
| 89 | Fixing only Water heater storage type (Geyser) Including material & labour for Installation of Geyser of 25/50 ltrs capacity complete all as specified and directed.( Item will be issued by MES Department) |
| 90 | Window Type AC / Split AC |
| 91 | Supply and fixing in replacement of new compressor hermetically sealed type equipped with suitable rated capacity electric motor and over load protection making all existing connection complete all as directed for 1.5 ton Window type/split Air conditioners all as directed Make : Kirloskar/Tecumsch |
| 92 | All as per above but of capacity 2 ton. |
| 93 | All as per above but Invertor type. |
| 94 | M&L for Gas refrigerant R12/R22/R410A/R 134 in the sealed system of window/Split type Air conditioners 1.5/2 Ton capacity after checking leakage / pressure vacumising flushing the sealed unit including replacement of filter drier and capillary tube all as specified. |
| 95 | S&F in repairsplit / window AC of capacity 1.5 / 2 TR (a) Blower motor 1/6 HP with base / rubber bush complete Make AUE / GE Suitable for any make / model |
| 96 | S & F Condensor fan motor 1/5 HP Make : AUE/GE |
| 97 | All as per above but Blower motor 1/3 HP for indoor unit split type AC suitable for any Make / any model as per site requirement. |
| 98 | S & FCondensor fan metallic blade. |
| 99 | S & Fblower fan PVC type suitable for split AC of any capacity. |
| 100 | S & FRunning capacitor 36 mfd make EPCOS/Havells/TESLA. |
| 101 | S & FThermostate make : Indfoss / EPCOS |
| 102 | S & Fplastic / juite Air filter. |
| 103 | S & Fcooling coil assembly suitable for any make / any model as per site requirement |
| 104 | S & FCondensor coil assembly. |
| 105 | S & F Front grill plastic type as per sample |
| 106 | S & F Capacitor 6 mfd Make : EPCOS/Havells/TESLA. |
| 107 | S & F Running capacitor 45 mfd Make : EPCOS/Havells/TESLA. |
| 108 | M & L for PVC sheathed Copper wire 3 core 4 sqmm |
| 109 | Supply and fix in replacement of electronic circuit plate (PCB) including necessary repairs to electronic circuit for remote operation suitable for 1.5 / 2.0 ton split type / Window AC HOT/COLD of any make or any capacity. |
| 110 | Supply and fix in replacement of remote suitable for 1.5 / 2.0 ton split type / Window type AC of suitable any make |
| 111 | Supply and fix in replacement Air break contactor relay 6.2 Amps, 415 Volts AC suitable for split type AC. Make:SIEMENS/L&T |
| 112 | Labour for shifting of split AC 1.5 , 2 ton capacitor one place to another places as required at site and disconnecting of copper tubing, PVC pipe connection and installation of New location indoor/outdoor unit complete with Gas charging tested on full load on site requirement.. |
| 113 | M&L for replacement with new indoor unit of capacity 1.5 ton with cooling coil, blower motor complete with all accessories of suitable any make of AC model. |
| 114 | M&L for replacement with new outdoorunit of capacity 1.5ton with condensor coil, blower motor 1/6 HP , single phase, including fixing in old serviceable compressor and connection of copper tubing suction / discharge of suitable any make of AC model. all as specified and directed complete. |
| 115 | M&L for replacement with new indoor unit of capacity2.0 ton with cooling coil, blower motor complete with all accessories of suitable any make of AC model. |
| 116 | M&L for replacement with new outdoorunit of capacity2.0 ton with condensor coil, blower motor 1/6 HP , single phase, including fixing in old serviceable compressor and connection of copper tubing suction / discharge of suitable any make of AC model. all as specified and directed complete. |
| 117 | Supply & Fixing Voltage Stabilizer for 1.5 to 2 Ton ACfrom 3 to 4 KVA capacity Make : V-Guard VG 500 or equivalent to Microtek. |
| 118 | Solar Water Heater |
| 119 | Taking down the Solar Water Heater from the site after disconnecting the water connection, electric connection, opening the solar water heater assembly and descalling with hydrochloride solution fixing of Solar water heater assembly, Dismantling solar panel, any Make or type by removing the glass panel carefully and refixing it cleaning dust, cleaning the water collector tubes and aluminium foil including descaling the existing hot water storage tank of any capacity and replacement of rock wool including repair of brass flange, ring nuts, bolts, washers and other connected works preparation of steel surface of water by rubbing with emery paper, painting the surface by spray painting with one coat of synthetic enamel paint of approved make without damaging other parts / wiring of the machine and refixing the same in its original position of electric back up with thermostat, making cold / hot water connection GI pipes as required to make the system functional and connecting up with hot concealed water pipe line for following capacity :-Note :- Spares and accessories will be measured and paid seperately. |
| 120 | ( a ) 200 Ltrs capacity Solar water heater |
| 121 | ( b ) 300Ltrs capacity Solar water heater |
| 122 | ( c ) 500Ltrs capacity Solar water heater |
| 123 | S&F in rapair Rotational Moulded polythene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs complete all as specified ISI Marked. Make: Syntex. |
| 124 | Taking down of old flexible rubber pipe and Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 125 | S&F BALL VALVE of size 20 mm |
| 126 | S/F in repair GI tubing medium grade with all fittings and fixed to walls/ceiling/floor or laid in trenches of 15 mm bore size all as specified and directed. |
| 127 | All as per above but for 20 mm bore size. |
| 128 | S/F in repair of hot water piping insulation with two layers of glass wool 25 MM thick covered with chicken wire mesh 24 Gauge and over all covering with aluminium sheet of 28 gauge all as directed. |
| 129 | S/F in repair gun metal or globe or gate valves 20 mm dia with iron wheel scewed both ends all as directed. |
| 130 | All as per above but for 15mm dia |
| 131 | S/F in repair Float valve 20 / 25mm dia high pressure with polythene float valve and fly nut complete screwed all as specified. |
| 132 | Supply and lay cable XLPE insulated screened PVC bedded , galvanised steel or wired armoured , electric power cables ( Heavy duty ) 1100 Volts grade stranded Aluminium conductor of size of 6 Sqmm 2 core complete all as specified and as directed. |
| 133 | S/F in repair insulated steel tank with inner protective coating for corosive resistance of 200 Ltrs of capacity of Make : Tata Power Solar/V-Guard etc. |
| 134 | S/F in repair insulated steel tank with inner protective coating for corosive resistance of 300 Ltrs of capacity of Make : Tata Power Solar/V-Guard etc. |
| 135 | S/F in repair insulated steel tank with inner protective coating for corosive resistance of 500 Ltrs of capacity of Make : Tata Power Solar/V-Guard etc. |
| 136 | S/F in repair flat plate collector consisting of transparent cover, riser tube, absober plate, header tube with proper insulation steel tank complete all as directed of Make : Tata power Solar/V-Guard etc. |
| 137 | S/F in replacement glass panel rubber beeding of approved quality, complete all as directed. |
| 138 | S/F in replacement heating element of 3 KW , B.S.P threaded with thermostat pocket and metal cap all as per existing one and as directed. |
| 139 | S/F in replacement of thermostat size 6/11" long, suitable for Solar Water Heater of any capacity all as directed. |
| 140 | Supply and fixing MCB, SP, AC, 240 volts "C" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed. |
| 141 | Supply & fixingI solator, DP (Double Pole), AC, 240 volts, B series capacity 32 Ampsand making connections complete all as specified & directed. |
| 142 | Supply and fixMCCB 3 Pole .415 V. fixed type, 25 to 100 Amps with breaking capacity 16 KA. |
| 143 | Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed. |
| 144 | Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed. |
| 145 | Ceiling Fan & Exhaust fan |
| 146 | M&L for servicing, repair and replacement ofunserviceable parts at E/M yard including opening offan body, cleaning, separating serviceable parts for reuse / refixsame after repairing andreplacing defecive parts witth new one (new spares shall be measured and paid seperately, minor spares and consumables like MS screws, 2 way connector, rubber/ reel, insulator,condenser holder, ms nuts bolts, washers, grease is deemed to be included in the quoated rate ) reassembling, greasing completeall as specified and directed for the following:- |
| 147 | (a) Ceiling Fan 1200mm Sweep of any make or model |
| 148 | (b) Ceiling Fan 1400mm Sweep of any make or model |
| 149 | (c) Wall / Cabin Fan 400 / 450mm Sweep of any make or model |
| 150 | (d) Exhaust Fan 250/ 300mm Sweep of any make or model |
| 151 | (e) Exhaust Fan 380mm Sweep of any make or model |
| 152 | (f) Exhaust Fan 450mm Sweep of any make or model |
| 153 | (g) Pedestal Fan 400 / 450mm Sweep of any make or model |
| 154 | (h) Air Circulator Fan 600mm Sweep of any make or model |
| 155 | M & L for rewinding the fans of any make, any model, from a reputed workshop, removing the burnt winding, cleaning slots, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc, replacement of body screws, testing and commissioning on full load for 4 hrs continuous running all as directed for the following:- |
| 156 | (a) Ceiling Fan 1200mm Sweep of any make or model |
| 157 | (b) Ceiling Fan 1400mm Sweep of any make or model |
| 158 | (c) Wall / Cabin Fan 400 / 450mm Sweep of any make or model |
| 159 | (d) Exhaust fresh air fan 200/250 mm Sweep of any make or model |
| 160 | (e) Exhaust Fan 300/350 mm Sweep of any make or model |
| 161 | (f) Exhaust Fan 450mm Sweep of any make or model |
| 162 | (g) Pedestal Fan 400 / 450mm Sweep of any make or model |
| 163 | (h) Air Circulator Fan 600mm Sweep of any make or model |
| 164 | M & L for Preparing the surface, removethe existing painting by scraping, cleaning, filling the cavities and applying 2 coats of spray paint of synthetic enamel white / Brown paint over a coat of red oxide primer, including writing the MES Nos. all as directed for the following:- |
| 165 | (a) Ceiling Fan 1200mm Sweep of any make or model |
| 166 | (b) Ceiling Fan 1400mm Sweep of any make or model |
| 167 | (c) Wall / Cabin Fan 400 / 450mm Sweep of any make or model |
| 168 | (d) Exhaust Fan 300mm Sweep of any make or model |
| 169 | (e) Exhaust Fan 380mm Sweep of any make or model |
| 170 | (f) Exhaust Fan 450mm Sweep of any make or model |
| 171 | (g) Pedestal Fan 400 / 450mm Sweep of any make or model |
| 172 | (h) Air Circulator Fan 600mm Sweep of any make or model |
| 173 | S/F, Condensor / Capacitor, 240V, AC, suitable for fans all as directed for the following:- |
| 174 | a)2.5 mfd |
| 175 | b)3.15/ 4 mfd |
| 176 | S/F, Ball bearing made out of high carbon steel, equivalent to the original, 6201/6202/6203/6204/NF-8/6205, suitable for any type, any make, any size fans all as directed. Make: SKF / NBC / FAG . |
| 177 | S/F, GM Bush bearing, equivalent to the original, X-I, X-2, X-3, X-4, suitable for any type, any make, any size, fan all as directed. |
| 178 | S/F, Nickel plated mild steel clamps,rubber reel insulator Nuts, Bolts, Washers and split pin suitable for ceiling fansany type, any make, any size all as directed. |
| 179 | S/F, Down rod, suitably threaded and holed, made out of 15mmdia GI tubes, duly painted, 300mm long, suitable for ceiling fansany type, any make, any size all as directed. |
| 180 | All as per above but 600mm long |
| 181 | All as per above but 900mm long |
| 182 | All as per above but 1800mm long |
| 183 | S/F, Fan canopy with tightening screw/check nut, made out of PVC, suitable for ceiling fansany type, any make, any size all as directed. |
| 184 | S&F Clutchfor ceiling fan made out of GI heavy both end threaded as per sample suitable for 1200 /1400 mm sweep ceiling fan |
| 185 | S&F Metal bottom cover of ceiling fan complete with bearing holder suitable for any type,any make or model all as directed. |
| 186 | All as above but top cover of ceiling fans. |
| 187 | S&F Magnetic ring of ceiling fans for any type,any make or model all as directed. |
| 188 | S/F, Fan blades made out of 1.2mm thick Aluminium alloy and MS screws duly balanced & spray painted with White or Brown colour, Set of three, suitable for ceiling fans of any type, any make all as directed for the following:- |
| 189 | (a) 1200mm Sweep |
| 190 | (b) 1400mm Sweep |
| 191 | S/F, Fan blades made out of Acrylic / PVC alloy and MS screws duly balance suitable for 450mm wall / cabin fans of any type, any make, all as directed. |
| 192 | S/F, Fan blades made out of thick Aluminium alloy and MS screws duly balanced & spray painted with approved colour, suitable for Exhaust fans of any type, any make all as directed for the following:- |
| 193 | (a) 300 mm Sweep |
| 194 | (b) 380mm Sweep |
| 195 | (c) 450mm Sweep |
| 196 | S/F, Fan blades made out of Acrylic / PVC alloy and MS screws duly balance suitable for 400 / 450mm Pedestal fan of any type, any make, all as directed. |
| 197 | S/F, Fan blades made out of thick Aluminium alloy and MS screws duly balanced & spray painted with approved colour, suitable for 600mm Air Circulator fan of any type, any make all as directed. |
| 198 | S/F, 1100V grade PVC sheathed PVCinsulated flexible 3 core cable with multistranded copper conductor of size 1.5Sqmm, ISI Marked. |
| 199 | Supply & fixing in repair base plate for wall mounting fan any type/ size as per existing size of fan all as specified and directed |
| 200 | Supply & fixing in repair regulator for wall mounting fan any type/ size as per existing size of fan all as specified and directed |
| 201 | Supply & fixing in repair protection cover (jali) complete front and backfor wall mounting fan any type/ size as per existing size of fan all as specified and directed |
| 202 | M&L for making hole in wall, Grouting 4Nos Rag Bolts of size 125mm long x 12mmm dia in PCC on wall including suitable nuts and washers for fixing / hanging geysers, complete all as directed. |
| 203 | S/F PVC sheathed,PVC insulated multi stranded copper conductor, 3 core, flexible cable, 1100 V grade, 2.5Sqmm, AC, connecting complete all as directed. |
| 204 | S/F in repair for plug top 3 pin 15 Amps capacity complete all as specified and directed . |
| 205 | Supply onlyZebra fastner of size 12x100 mm complete all asspecified and directed . |
| 206 | S/F in repair modular Power Unit 20A, 3pin, AC, 240V ISI Marked incl FRP Box and 01 No"s 16 Amps MCB SP all as specified.. |
| 207 | S&F in repairs, Wall fan, 450mm sweep, AC,230V incl T/D old u/s one and depositing to MES store complete all as specified and directed. |
| 208 | S&F in reapirs, PVC fresh air fan, 250mm sweep with louvers, AC, 230V incl T/D old u/s one and depositing to MES complete all as specified and directed. |
| 209 | M&L for making opening in the wall for fixing exhaust fan upto 250mm /200mm, including plastering work & making good the surfaces as directed. |
| 210 | Walkin-Cooler :- |
| 211 | Supply and fixing in replacement of new compressor hermetically sealed type equipped with suitable rated capacity electric motor and over load protection making all existing connection complete all as directed for 5 Ton indoor type Walkin-cooler all as directed Make : Kirloskar/Tecumsch |
| 212 | All as per above but of capacity 5 TR indoor type walkin-cooler. |
| 213 | Supply and charging of Refrigerent gas R-407 (c) Non CFC ( ecofriendly)in company sealed cylinders of any capacity complete all as specified. Note: If the recharged refrigerent gas is leaked within one month of running of AC plant, the contractor shall recharge gas (including supply) without any extra cost to department. |
| 214 | Taking down of walkin-cooler 2.5/5 Ton capacityton capacity and cleaning / serving of walkin-cooer, overhauling of blower motor replacement of worn out parts, preparation of body for painting one coat of black paint inner side and one coat synthatic enameled paint on the outer cover of walkin-cooler and making of SM/MES No and testing of full load of under relevent item of schedule "A" and reinstallation at site. Note : Worn out parts shall be measured & paid seperately. |
| 215 | S&F in repairwalkin-cooler capacity5 TR (a) Blower motor 1/6 H2 with base / rubber bush complete Make AUE / GE Suitable for any make / model |
| 216 | All as per above but Blower motor 1/3 HP for indoor unit split type AC suitable for any Make / any model as per site requirement. |
| 217 | S & F Starting capacitor 70 mfd make : EPCOS/Havells/TESLA. |
| 218 | S & F Controller. Any make / any model |
| 219 | S & F Inlet sensor for indoor |
| 220 | S & FSensor for outlet |
| 221 | S & FSensor for midlet |
| 222 | S & FSensor for room |
| 223 | M&L for replacement with new indoor unit of capacity 2.5/5 ton with cooling coil, blower motor complete with all accessories of suitable any make of model. |
| 224 | M&L for replacement with new outdoorunit of capacity 2.5/5ton with condensor coil, blower motor 1/6 HP , single phase, including fixing in old serviceable compressor and connection of copper tubing suction / discharge of suitable any make of model. all as specified and directed complete. |
| 225 | Renewal of Bimetal overload relay suitable for , Direct Mounting on ML Contactors, (Directly Operated) range up to 32 Ampsto match with the existing complete all as specified. |
| 226 | High pressure and low pressure control (HP&LP)switch for F-22 complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
