|
| 1 | Earth Work Excavation and Deposting on the Book with initial lead and lift of 10m and initial lift of 2m in Hard Stiff Clay , Stiff back cotton Hard red earth Muram gravel stong earth and earth mixed with small size boulders etc complete |
| 2 | Cutting of Cement concrete Road with all cost of Labour and Conveyance from the site with all Charges etc complete |
| 3 | Cutting the Bitumen Road with all cost of Labour Charges and Conveyance from the site with the all charges etc complete |
| 4 | Supply and delivery of following water supply specials as per standard specification |
| 5 | 80 mm GI Bend |
| 6 | 100 mm GI Bend |
| 7 | 50 mm GI Flange set |
| 8 | 100 mm GI Flange set |
| 9 | 80 mm Hex Nipple |
| 10 | 80 mm Union |
| 11 | 100 mm Union |
| 12 | 80 mm Sluice valve C.I. Heavy |
| 13 | 100 mm Sluice valve C.I. Heavy |
| 14 | 125 mm Sluice valve C.I. Heavy |
| 15 | 150 mm Sluice valve C.I. Heavy |
| 16 | 50 mm Gate valve Gun metal |
| 17 | 80 mm Gate valve Gun metal |
| 18 | 80 mm Non return valve Gun metal |
| 19 | 80 mm CID Joint set |
| 20 | 100 mm CID Joint set |
| 21 | 125 mm CID Joint set |
| 22 | 150 mm CID Joint set |
| 23 | 90mm6Ksc PVC pipes |
| 24 | 110mm6Ksc PVC pipes |
| 25 | 140mm6Ksc PVC pipes |
| 26 | 160mm 6Ksc PVC pipes |
| 27 | 90 mm PVC Coupler Mould |
| 28 | 110 mm PVC Coupler Mould |
| 29 | 140 mm PVC Coupler Mould |
| 30 | 160 mm PVC Coupler Mould |
| 31 | 90 mm PVC Bend 6ksc |
| 32 | 110 mm PVC Bend 6ksc |
| 33 | 140 mm PVC Bend 6ksc |
| 34 | 160 mm PVC Bend 6ksc |
| 35 | 90 mm Equal Tee Mould |
| 36 | 110 mm Equal Tee Mould |
| 37 | 140 mm Equal Tee Mould |
| 38 | 160 mm Equal Tee Mould |
| 39 | 90 mm Threaded adaptor male/Female |
| 40 | 110 mm Threaded adaptor male/Female |
| 41 | 140 mm Threaded adaptor male/Female |
| 42 | 160 mm Threaded adaptor male/Female |
| 43 | 90 mm End cap |
| 44 | 110 mm End cap |
| 45 | 80mm GI Pipe |
| 46 | 65mm GI Pipe |
| 47 | 40mm GI Pipe |
| 48 | 63mm PVC Pipe |
| 49 | 40mm PVC Pipe |
| 50 | Laying and lowering GI Pipes and Specials to trench and laying to proper grade and alignment and directed by the TWAD officers including Conveyance of water for filling during testing . |
| 51 | 15 mm to 40 mm GI Pipe |
| 52 | 50 mm to 65 mm GI pipe |
| 53 | 80mm to 150 mm GI pipe |
| 54 | Laying and lowering PVC Pipes and Specials to trench and laying to proper grade and alignment and directed by the TWAD officers including Conveyance of water for filling during testing . |
| 55 | up to 40mm PVC Pipe |
| 56 | 50mm to 75mm PVC Pipe |
| 57 | 90mm to 110mm PVC Pipe |
| 58 | 125mm to 160mm PVC Pipe |
| 59 | Removing the burst Pvc pipes from the pipline and removal of slushy soil and bailing out water and replacing the pipeline with sound pipe including jointing and cost of refilling the pipeline with water for retesting the pipeline etc complete. |
| 60 | Upto 63mm dia (OD) PVC Pipes |
| 61 | 75mm dia (OD) PVC Pipes |
| 62 | 90mm dia (OD) PVC Pipes |
| 63 | 110mm dia (OD) PVC Pipes |
| 64 | 125mm dia (OD) PVC Pipes |
| 65 | 140mm dia to 160mm dia (OD) PVC Pipes |
| 66 | 180mm dia to 200mm dia (OD) PVC Pipes |
| 67 | Refilling the excavated earth including all cost etc Complete as per standered specification. |
| 68 | Pumpset maintenance |
| 69 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 70 | Upto 5 HP |
| 71 | Above 5.00 HP to 10.00 HP |
| 72 | 10HP Motor coil rewinding charges with nccessary insulation varnishing etc. Complete including cost of copper coil and conveyence charges of pumpsets for on site worke to workshop and back to site, the Gauge of winding should be as in the original motor |
| 73 | 5HP |
| 74 | 7.5HP |
| 75 | 10HP |
| 76 | Labour charges for replacement of following Pumpset spares |
| 77 | Motor thrust bearing |
| 78 | Motor end bushes |
| 79 | Upper studring |
| 80 | Lower studring |
| 81 | Non return value |
| 82 | RCD Cup (Diffuser) |
| 83 | Bearing sleave |
| 84 | Pump impellor |
| 85 | impellor seal ring |
| 86 | Stage Casing |
| 87 | Bearing bush |
| 88 | Pump shoft |
| 89 | Pump half coupling |
| 90 | Soction cuse strainor |
| 91 | Sand Guard |
| 92 | Labour Charges for replacement of the following Electrical Materials |
| 93 | 32 A Fuse unit |
| 94 | 63 A Fuse unit |
| 95 | 100A Fuse unit |
| 96 | 200 A Fuse unit |
| 97 | 32 A Main Switch |
| 98 | 63 A Main Switch |
| 99 | 100 A Main Switch |
| 100 | 2.5 mm2 Flat cable Three core (Copper) |
| 101 | 4.00 mm2 Flat cable Three core (Copper) |
| 102 | 24\" x 18\" Wooden board |
| 103 | 18\" x 12\" Wooden board |
| 104 | Labour Charges for replacement of the following Pannal Board Materials |
| 105 | Pannel board 10.00 HP capacity Single & Preventor 10.00 HP |
| 106 | Contact point |
| 107 | Relcy coil |
| 108 | Timer |
| 109 | Capacitor |
| 110 | No voltcoil |
| 111 | Starting unit |
| 112 | Voltmet 65mm size |
| 113 | Ammetor 65mm size |
| 114 | Labour charges for checking upto wiring diagram and relay setting 10.00Hp |
