Tender For Construction Of Minor Bridge On Wathoda-Ampend Road V.R. 116 At Km 4/700 Tq. Warud Dist. Amravati
Tender Value
48.96 Lakhs
Estimated cost
Bid Submission
12 Jun 2023
0 days left
EMD
49000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
warud → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Minor Bridge On Wathoda-Ampend Road V.R. 116 At Km 4/700 Tq. Warud Dist. Amravati
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Jun-2023 | Date | Date | 13-Jun-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundationin earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directedetc. complete. 0 to 1.5 m |
| 2 | 1.5 to 3 m |
| 3 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) |
| 4 | Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC without SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with natural /artifical sand) |
| 5 | Providing cast in situ / ready mix M15grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer)without SCADA with fine agreegates of required specifications (Natural sand /etc ), cement 4.05 bags/cumt) |
| 6 | Providing and laying in situ / ready mix controlled grade of M20 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC withoutSCADA enabled without reversible drum type mixer/ concrete batch mix plant (pan mixer)with fine agreegates of required specifications (etc ), excluding reinforcement) |
| 7 | Providing and laying in situ / ready mix M-25 controlled reinforced cement concrete of trap metal for raft slab including \"V\" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete. concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand /etc ) etc. complete. (excluding reinforcement).a) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer) . |
| 8 | Prividing and fixing pressure relief pipes of 110 mm diametre of PVC as per drawing for R.C.C Raft,galaries returns, abutments, wing wall etc complete. |
| 9 | Providing and laying of apron with cement concrete blocks of size 0.50X0.50X0.50m cast in situ / ready mix and made with nominal mix of M15 grade cement concrete with a minimum cement content of 250kg/cum with fully automatic micro processor PLC without SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan mixer)as per IRC:21-2000 etc. complete. |
| 10 | Providing and filling sand in foundation trenches / below Raft as per drawing and technical specifications etc. complete. (Coarse Sand and Gravel) |
| 11 | Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \"V\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steelform work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners |
| 12 | Providing and laying in situ / ready mix controlled M-25 cement concrete ofof trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete( Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications |
| 13 | Providing and laying in situ / ready mix M25 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC without SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand /etc )A) Ballast wall & Kerbs |
| 14 | B) Box Returns |
| 15 | Providing and laying in situ / ready mix M-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcementetc. complete. (with fully automatic micro processor based PLC without SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications i) Height up to 5 m, normal rate |
| 16 | Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC without SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand /etc ) |
| 17 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 18 | Providing R.C.C. parapet with M-20 Cement concrete of trap / granite / quartzite / gneiss metal with cast in situ / precast panels as per the detailed drawing height of 1.1 mt.above top of road surface, with post of 225 mm x 190 mm at 2 meter or less at equal distance suitable to span having 10 mm reinforcement of minimum 4 bars and 6 mm stirrups and R.C.C panels of approved design at clear distance of 125 mm and thickness of 150 mm with 10mm dia. 3 no.of bars reinforcement at top and bottom and 6 mm dia. 4 no.bars as vertical or horizontal rails of size 100 mm x 150 mm and with clear speacing of 240 mm including scaffolding, steel centering, plywood/steel formwork, compacting finishing, uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface and curing etc. complete. (Including cost of reinforcement & cover block.) |
| 19 | Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. |
| 20 | Providing, cutting, bending, hooking, tyingand laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 21 | Providingand laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete. |
| 22 | Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) |
| 23 | Providing and laying of filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications etc. complete. |
| 24 | Providing tar paper bearing including laying in proper position etc. complete. |
| 25 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 26 | BOQ (Approaches) |
| 27 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 28 | Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete.(Material obtained from departmental Land) |
| 29 | Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, not less than 97% of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with Power roller. |
| 30 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 31 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 32 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. |
| 33 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the roadsidebreakingthemtorequiredgradationincludingconveyingtheboulders/Rubbleandstackingthe broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements)a) 80 mm Metal, By breaking Boulders (Hand broken). |
| 34 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the roadsidebreakingthemtorequiredgradationincludingconveyingtheboulders/Rubbleandstackingthe broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary thedateofapprovalwillformpartofthemeasurements) a) 40mmMetal,Bybreaking Boulders (Hand broken). |
| 35 | Spreading 80/40mmmetalforroadworkincludingsectionongetccompleteasdirectedbyEngineerin charge . |
| 36 | Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. |
| 37 | Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. |
| 38 | Providing dry rubble stonepitching 23 cm (about 9) thick including all material, quarry spalls, labour etc. complete. |
AI Tender Summary
Tender Timeline
Jun 02, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 12, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 15, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender