Tender For Supply Of Multi Section Digital Axle Counter Evalution Arangement With Required Interface Cards, nagpur-Maharashtra

Supply Of Multi Section Digital Axle Counter Evalution Arangement With Required Interface Cards / Electronics For Working Of Track Side Detection Arrangement, Reset & Co-Operation Arrangement, Modem For Communication Between Evalutors, Communication Arrangement With Track Side Electronics For Working Of 4 Track Sections ( 5 Detection Points ) For Functioning Of Automatic Block Signaling. This Shall Also Include Necessary Power Supply Arrangement For Working Of The System. Proper & Recommended Earthing As Well As Surge And Lightening Protection Arrangement Shall Also Be Provided . The System Supplied Shall Have Approval / Cross Approval Of Rdso. Other Technical Details Of Msdac Are-1 ) The Msdac System Supplied Shall Have Approval Of Rdso As Per Specification No. Rdso / Spn 176 / 2013 ( Versin 3 ) With Latest Amendments & Manufcturers Specifications Or Shall Have Cross Approval Of Rdso For The Produc Being Offered., 2 ) Axle Counting System Shall Be Complete With Mounting Arrangement, Power Spply Arrangement Necessary Interface For Providing Information Of Status Of Track Sections To Pick Up Signalling Relays Track Section-Wise., 3 ) The Msdac Equipment Shall Be Provided With All The Necessary And Recommended Protection Devices Forlightning And Surge Protection. 4 ) Railways Shall Make Avilable 60 Volt / 24 Volt Dc Supply For Functioning Of Msdac. However, At Most Of The Stations, And Ibs Locations, Necessary Power Supply System For Operation Of Msdac Have Been Included In The Tender Schedule And Same Shall Be Supplied And Installed As Per The Details Indicated In The Tender Schedule. 5 ) The Track Clear / Occupied Information Supplied By The System For Each Track Section Shall Be Utiilized For Energizing Vital Signaling Relay. This Information Shall Be Required For Interlocking. 6 ) The System Shall Have Facility Of Preparatory Reset Of Individual Track Section.7 ) Connecting Cable Provided Along With Track Device Should Be Of Adequate Length ( Not Less Than 5.0 Meter ) To Connect To The Track Side Electronics Which Will Be Installed In The Location Box Being Provided By Railways / Contractor. The Connecting Cable Must Be Duly Protected By High Quality Pipe ( Sample Must Be Approved By Engineer In Charge Of The Work ) , Suitable For Underground Application & Laid At An Adequate Depth. 8 ) Tenderer Shall Ensure That The Installation Of Msdac Equipment Shall Be Done By Manufacturer Of The Equipment / Their Authorized Technical Staff. 9 ) Necessary Technical Documents, Installation & Maintenance Manuals, Trouble Shooting Procedure Details And Any Other Required Technical Information, Regarding Msdac Supplied Shall Be Provided To Ensure Proper Installation / Maintenance / Repair Of Msdac As Per Manufacturers Specifications / Stipulations. 10 ) Tenderer Should Submit Authorization From Original Equipment Manufacturer To Supply Of Equipment Against This Tender, If Awarded. 11 ) Tenderer Should Submit Commitment From Original Equipment Manufacturer For Supply Of Spares If Required, For Next Five Years, If Awarded. Inspection By Rdso. [ Warranty Period: 30 Months After The Date Of Delivery ] , Supply Of Detection Point Complete With Track Side Electronics Compatible As Per Rdso Specification. No. Spn / 176 / 2013 ( Ver.3 ) . Item To Be Supplied Along With Mechanical Fixtures & Fittings, Power Supply Arrangement, Counting Heads With Necessary Fixing Arrangement On Rails Including Connecting Cables Of 10 Meter Length Duly Housed In Suitable Enclosure. Inspection By Rdso. [ Warranty Period: 30 Months After The Date Of Delivery ]

Refer document

INR 174800.0 /-

Refer document