|
| 1 | Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, levveling, sectioning breaking clods etc., includingall incidental charges etc., complete as per standard specification . |
| 2 | Plain cement concrete in 1:4:8 mix (one cement, four sand and eight aggregate) using 40mm ISS hard broken granite metal from approved quarry including cost, conveyance of all to site, mixing, laying and curing charges etc., complete complying with standard specification |
| 3 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. |
| 4 | Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 5 | Collection,supply and Well Gravel filling from approved quarry to work site and stocking to the Departmental gauge for premeasurement as directed by the Departmental Engineer, to required depth not more than 15cm depth including cost andConveyance ofsand to site and all labour charges for filling etc., Complete complying with Standard Specification |
| 6 | Collection,supply and filling ofsand from approved quarry to work site and stocking to the Departmental gauge for premeasurement as directed by the Departmental Engineer, to required depth not more than 15cm depth including cost andConveyance ofsand to site and all labour charges for filling etc., Complete complying with Standard Specification |
| 7 | Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 8 | Supplying and laying Rubber moulded Hydraulic Pressed Paver Blocks confirming to IS 15658/2006 Specifications manufacturing and laying standards of M50 grade 80mm thick ( Table 1 clauses 5 and 9.1.4 ) suitable for bus terminals, industrial complexes, roads on expansive soils etc., ) including the costof paver blocks size 225mm x 112.5mm x 100mm and conveyance of materials to site mentioned in the tender schedule, cost of loading and un loading handling during conveyance, laying the paver blocks over a sand bed of 150mm thick ( excluding the cost of sand ) conveyance of vibrator machine conveyance of paver block cutter to site and hire charges of vibrator and cutter and labour charges of operators and labour for leveling the sand to the required alignment and paving the paver blocks etc., complete to IS15658/ 2006 specification. |
| 9 | GST 18% |
