|
| 1 | Service and replacement of scrubbing unit made of MS with Thickness 2mm, and Pipelines, Design & fabrication of high speed impellor made of Material MS grade, Dimensions500mm dia 150mm height and 3mm thickness – 1No. Design and manufacturing of impellor matching shaft of 65mm dia,600 mm long, to match suitable bearing, Pulley, slated keyway, High speed SS Bearing UCB type – 2Nos, Matching pulley, matching poring and Slate keyway drilling Balancing of impellor at 1400 RPM Service of water spray and fixing of pipelines Coil winding of 5HP motor and replacement of Suitable bearings. Service and replacement of ID Blower MS.main door with open and close gear motor system connected to Control panel at your existing Crematorium furnace. |
| 2 | Service and replacement of body crematorium area bottom place Fire refractory bricks grade suitable size.Supply and fixing of body Placing bed IS8 slabs 40% aluminum 24 x 12 x 3(inches). Bed size 300mm height and 2-meter long 600mm width body placing bed by fixing cast-iron frames. Removal of old damaged body placing bed. |
| 3 | Supply and fixing of Pipelines and ducting-fixing and welding.20 mtr long, 300 mm dia, 4mm thick, flanges, boltnut,gasket, 90-degree bend including all labor charges etc. |
| 4 | Design, fabrication, Supply and fixing of furnace Manual Operated main door Door dimension 1200mm x 1400mm x 225mm Door support given by MS Angles. Providing door Insulation material 96 grade fiber Blanket up to 1260 Deg Celsius lining fully supported by stainless steel studs 304 grade. Covering the door fully using mild steel. Handing over in smooth running condition. (Up and down movements) |
| 5 | Providing LPG manually firing system, includes following items, a) Supply and fixing of 10 cylinders manifold -1No,4 burners Non-return valve -10Nos, Metallic flexible hose -10 Nos, Main ball valve -1No, high Pressure regulator -1No, Needle valve with copper tube -1No, Pressure dial Gauge -1No,Flow control valve (1”) -1 No,High velocity burners(Ni-21% Cr-25%) -6 Nos,LPG pipeline 1” Dia -1Set, 1” Pipe flanges -1Set l), LPG pipeline ¾” Dia -1 Set, ¾” Pipe flanges -1Set, Suitable Fasteners (Bolts, Nuts, & washers) -1Set, ¾” Ball valve -1No, 4” Dia 1 meter long 304 pipe -6Nos, 1” Dia 1 meter long 304 -6 Nos, Hex Nipple 3mm Dia -6 Nos, 1’ union -4 Nos, Copper tube 1-meter long 8mm Dia -6 Nos, Copper tube 1 meter long 10 mm Dia -1No, ¾” Pipe nipple -10 Nos, Burner covering insulation material 1260 Deg C grade ceramic fibers work. The rate inclusive of all Materials and all labor charges etc. Providing burner fixing Holes of 4” dia at both sides of the wall at your existing gasifier crematorium furnace |
| 6 | Semi Automatic LPG fired burner (35000 Cal) 4 nos.Electrical Control Panel features:• 5hp blower- 1no• 2hp water pump 1no• Burner Outputs 4nos• Temp Controller 1nos• Temperature couple 1nos• Compensating cable 1set• Burner to panel cables 10 core.75sqmm 4set(65MTRS)• Sensor K-TYPE 1set• Automatic door up to down 0.5HP 3PH |
| 7 | Supply and fixing operating control panel backup DG set, temperature controller, voltmeter, ammeter, main onoff switch, MCB relay, on off indicator switches, indicator lamps, connecting wires and cables. |
| 8 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 9 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\" X 43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 10 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 11 | Fine polished Steel Grey Granite Slab 1200mm x 600mm,16mm to 18mm thick (SOR PWD -Pg No 36) |
| 12 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 13 | Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 14 | 120W LED Street Light Fitting with LED |
| 15 | Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 16 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement |
| 17 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 18 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting |
| 19 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 20 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter |
| 21 | Supply and fixing of 20W 4 Feet LED Fitting with LED including all cost and conveyance etc., |
| 22 | Supply and delivery and fixing of 1000 Litre HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc. |
| 23 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23 |
| 24 | Provision For GST 18% |
