Housing Cooperative Society Registration has published Tender For Providing Washroom For Men And Women Including Necessary Infrastructure At Shooting Range-1 Village Abhanpura, Tapukara District, Alwar Rajasthan.. Submission Date for this Tender is 07-06-2023. Toilet Bathroom Tenders in tapukara Rajasthan. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. |
2 | All kinds of soil |
3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
4 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. |
5 | Ordinary rock |
6 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
8 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
10 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
11 | Centering and shuttering including strutting, propping etc. and removal of form for |
12 | Foundations, footings, bases of columns, etc. for mass concrete |
13 | Columns, Pillars, Piers, Abutments, Posts and Struts |
14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
15 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
17 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
18 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
19 | 40 mm thick with 20 mm nominal size stone aggregate |
20 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
21 | Light shade pigment using white cement |
22 | 20 mm cement plaster of mix : |
23 | 1:6 (1 cement: 6 Coarse sand) |
24 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
25 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
26 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
27 | Rectangular shape 453x357 mm |
28 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
29 | Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern |
30 | Providing and fixing PTMT, push cock of approved quality and colour. |
31 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms |
32 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
33 | W.C. pan with ISI marked white solid plastic seat and lid |
34 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
35 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
36 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
37 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
38 | Flexible pipe |
39 | 40 mm dia |
40 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
41 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominal bore |
42 | Providing and fixing PTMT bib cock of approved quality and colour. |
43 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
44 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. |
45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work - Exposed on wall) |
46 | 15 mm nominal dia Pipes |
47 | 20 mm nominal dia Pipes |
48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
49 | 15 mm nominal dia Pipes |
50 | 20 mm nominal dia Pipes |
51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
52 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
53 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
54 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
55 | 20 mm nominal bore, weighing not less than 40 gms |
56 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
57 | Providing and fixing PTMT stop cock of approved quality and colour. |
58 | 20 mm nominal bore, 89 mm long, weighing not less than 88 gms |
59 | Providing and fixing PTMT grating of approved quality and colour. |
60 | Circular type |
61 | 125 mm nominal dia with 25 mm waste hole |
62 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
63 | 45 cm length |
64 | 20 mm nominal bore |
65 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
66 | All kinds of soil |
67 | Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia |
68 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
69 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
70 | With Sewer bricks conforming to IS : 4885 |
71 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
72 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
73 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
74 | Two or more coats on new work |
75 | Providing and fixing CPVC ball valve of approved quality, High or low pressure, with plastic floats complete : |
76 | 20 mm nominal bore |
77 | Designing, providing , fixing and installation of porta cabin made up of PPGI-PUF-PPGI composite insulated sandwhiched pannel having thickness of 50 mm, PPGI sheet thickness .45 mm with base fixed on suitable ISMB section at the periphery, grid of suitable tubular section with a pitch not more than 600mm in both direction, main frame with suitable angle section for support and T section for support system of roof for better stablity so as to sustain load of 1000 Ltr PVC Tank with frame including cutting opening for plumbing lines etc complete including fixing the assembly on platform with the help of suitable base plate connections etc completeas per direction and approal of Engineer-in-charge. (Area of Pannel Shall be considered for payment) |
78 | Providing and fixing 110mm dia PVC Floor trap of approved quality includding fitting, fixing etc. complete as per direction. |
79 | Providingand fixing Doors made up of PPGI-PUF-PPGI composite insulated sandwiched pannel having thickness 50 mm with all necessary poweder coated alumium fittings as per direction of Engineer-in Charge. |
80 | Providing and fixing Shed made up of PPGI-PUF-PPGI composite insulated sandwiched pannel having thickness 50 mm, PPGI sheet thickness .45 mm having requisit angle/T section for support mounted over MS Tubular sections with the help of base plate etc complete as per direction of Engineer-in charge. (MS Tube shall be paid seperatly) |
81 | Providing and fixing unplasticized PVC SWR pipes 110 mm dia conforming to IS 13592 Type B, including joining, fitting, fixing etc with all material & labours etc. complete as per direction of Engineer-in-Chrage. |
82 | Providing and fixing fiber reinforced plastic septic tank of capacity 10000 Ltr capacity of approved brand including making neccersary fittings and providing connection to spetic tank as per direction of Engineer-in-Charge |
83 | Providing and fixing PUFF pannel wall mounted urinal partitons including all necessary fittings etc complete as per direction of Engineer-in-charge. |
84 | Electrical Items as per direction of enginner in charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail