Tender For Repairs To Joinery, Roof Treatment, Floor Tiles, Sunken Treatment And Allied Works At 9Brd Under Ge (Af) Lohegaon At Af Stn Pune
Tender Value
40 Lakhs
Estimated cost
Bid Submission
28 Jun 2023
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Joinery, Roof Treatment, Floor Tiles, Sunken Treatment And Allied Works At 9Brd Under Ge (Af) Lohegaon At Af Stn Pune
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Jun-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking downexisting water proofing treatment by Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets,scrubbing down with water etc. complete all as specified and directed. |
| 2 | Demolition of cement concreteof any description in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | Roughening surfaces of old concrete floors/slabs by picking, sweeping, cleaning and washing down with water to remove dust, brushing neat cement slurry with 3.0Kg of cement per sqm complete all as specified and directed. |
| 4 | M&L for cutting grooves in brick wall 75 mm wide and 65 mm deep tucking in edges of felt and shapinghorizontal face of grooves with CM (1:3) complete all as specified and directed. |
| 5 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight)complete all as specified and directed. |
| 6 | M&L for providingPCC 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) as in padding concrete for getting proper slope of roof / covering etc as complete all as specified and directed. |
| 7 | M&L for rendering 10 mm thick average in cement mortar (1:4) over roof surfaces mixed with liquid WPC as per manufacturer’sinstructions, finished fair without using extra cement complete all as specified and directed.(NOTE: WPC shall be measured and paid separately) |
| 8 | M&LPreparation of surfaces of roof and applying evenly a tack coat of bitumen grade 85/25 of approved make to concrete surfaces at the rate of 1.2 kg. per sq. m per coat complete all as specified & directed. |
| 9 | M&L for roof treatment using APP based polymeric membrane, minimum weighing 3 kg / sqm and minimum 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with side over lap75 mm and end lap minimum 100 mm and sealing over lap and joints as per manufacturer\"sinstructions complete all as specified and directed. |
| 10 | M&L for one coat of aluminium paint 0.30 ltr / sqm above the APPmembrane complete all as specified and directed. |
| 11 | Supply only liquid water proofing compound as per manfacture instruction |
| 12 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to tore (measured overall as fixed along the centre line over fittings and accessories) |
| 13 | S&F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 14 | S&F for 110 mm PVC (SWR) bends any radius complete all as specified and directed. |
| 15 | S&F for 110 mm PVC (SWR) junction single, (Single T) with oval access door equal or unequal complete all as specified and directed. |
| 16 | Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 17 | S&F 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel colour sheet having tensile strength of 550 Mpa as in roof covering with self tapping screws complete all as specified and directed. |
| 18 | S&F 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based plain colour sheet having tensile strength of 550 Mpa as in roof covering with self tapping screws complete all as specified and directed. |
| 19 | Disconnecting existing exc 250 nexc 500 Ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and dirtfrom mouths of circulating pipes, etc. and hoisting if required reconnecting andre-fixing in position complete all as specified and directed. |
| 20 | Disconnecting existing 1000 Ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and dirtfrom mouths of circulating pipes, etc. and hoisting if required reconnecting andre-fixing in position complete all as specified and directed. |
| 21 | Dismantling water tanks of any type of capacityexc 250 but n.exc 500 liters and removing to store complete all as specified and directed. |
| 22 | S&F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I . |
| 23 | Dismantling water tanks of any type of capacityexc 500 liters but n. exc 1000 ltrs and removing to store complete all as specified and directed. |
| 24 | S&F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I . |
| 25 | S&F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to20 mm bore pipe complete all as specified and directed. |
| 26 | S&F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to15 mm bore pipe complete all as specified and directed. |
| 27 | Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 28 | Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 29 | S&F GI pipe medium grade 15 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 30 | S&F GI pipe medium grade 20 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 31 | Refixing old steel tubing and connections ,galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm bore in new or old position complete all as specified and directed. |
| 32 | Refixing old steel tubing and connections ,galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm bore in new or old position complete all as specified and directed. |
| 33 | Removal of air lock/blockage of water in GI tubing 15mm bore of any type incl taking down (if reqd), cleaning the pipe or fitting etc and refixing the same in position complete all as specified and as directed |
| 34 | Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 35 | M&L for15 mm thick rendering in CM 1:4 on brick or concrete surfacesfinished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall complete all as specified and directed. |
| 36 | M&L for prepartion of newly plastered surfaces and applying two coats of cement based paint over a coat of primer on wall complete all as specified and directed. |
| 37 | M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfacesfinished even and smooth without using extra cement, complete all as specified and directed. |
| 38 | M&L for5mm thickin CM 1:3 rendering on brick or concrete surfaces finished even and smooth without using extra cement on ceilings complete all as specified and directed. |
| 39 | M&L for prepartion of newly plastered surfaces and priming plastered surfaces with alkali resistant primer and applying two coats of oil bound distemper on walls complete all as specified and directed. |
| 40 | M&L for preperation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 41 | M&Lfor preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 42 | Taking down Chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 43 | Taking down Chowkats or frames exc. 1.50 Sqm but n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 44 | Taking down shutter of any description n. exc 1 sqm each. complete all as specified and directed. |
| 45 | Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 46 | S&F pressed steel door frame of size 125X60mm with one or more rebates including necessary fixing lugs,hinges,lock strike plate etc complete all as specified and directed. |
| 47 | M&L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded, fitted with cut and mitredbeads for securing glass etcfor window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed . |
| 48 | M&L for Factory made of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed . |
| 49 | M&L for preparation of new or previously untreated surface of wood of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed |
| 50 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube complete all as specified and directed . |
| 51 | S&FFactory made solid panel PVC door shutter 35mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed . |
| 52 | S F Butt hinges, extruded aluminium alloy with galvanised 100 mm long mild steel hinge pin, anodised and fixed, type B-21 |
| 53 | S&F for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed . |
| 54 | S&F for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed . |
| 55 | S&F for 150 mm sizealuminium anodised barrel tower boltof extruded sectioncomplete all as specified and directed . |
| 56 | S&F for 300 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 57 | S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 58 | S&Ffor 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 59 | S&Ffor 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 60 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for complete all as directed. |
| 61 | S&F Framed work such as guard bar / grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; conforming to Fe.290.Gde-E-165. complete all as specified and directed . |
| 62 | S&F Angle iron forwindow/door frame Mild steel in flat, round or square bars, in available lengths Structural steel, rolled section such as joist, beam, channel, angle, tee, in available lengths, Fe-290 (Gde E-165) including finishing the surface smooth. |
| 63 | M&L for preparation of new or previously untreated surface of Steel and iron of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide,zink crome complete all as specified and directed |
| 64 | M&L for 2nd class hardwood Plain fillets sectional area n. exc 3 Sq CM each square or rectangular in section, clean sawn, secured with nails orbrads complete all as specified and directed . |
| 65 | M&L for flat iron for hold fast of doors / windows confirming to FE - 290 GdeE-165complete all as specified and directed. (Flat Iron 250 x 30 x 3 mm thick @ 0.707 Kg / RM) |
| 66 | M&L for preparing surfaces of wood and wood based materials of any description and girth, backs of chowkats, etc, area tarred exc 0.1 sq. m but n exc 0.5 sq. m each and tarred with coat tar / black paint complete all specified and directed. |
| 67 | Cutting holes for inserting hold fasts in Brick wallsbuilt in cement mortar and making good disturbed portion in PCC (1: 2 :4)type B1 or in cement mortar (1:3) as required, depth of embeddedportion exceeding half brick but not exceeding one brick for full brick walls, complete all as specified and as directed . |
| 68 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed . |
| 69 | S&F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed. |
| 70 | S&F MS mortice lock, vertical type, size 100 mm, long 4 levers with handles as in repairs complete all as specified and directed. |
| 71 | S&F in repairs for butt hinges medium weight cold rolled mild steel of 75 mm size. complete all as specified and directed . |
| 72 | S&F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed . |
| 73 | S&F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed . |
| 74 | S&F in repairs for 100 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed . |
| 75 | Taking down and refixing shutter after repair of any description n. exc 1 Sqm eachin same opening complete all as specified and as directed. |
| 76 | Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm eachin same opening complete all as specified and as directed. |
| 77 | S&F in repairs for 150 mm sizealuminium anodised barrel tower boltof extruded sectioncomplete all as specified and directed . |
| 78 | S&F in repairs for 100 mm sizealuminium anodised barrel tower boltof extruded sectioncomplete all as specified and directed . |
| 79 | S&F in repairs for 300 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 80 | S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed . |
| 81 | S&F in repairs for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed. |
| 82 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed. |
| 83 | S&F in repair cast iron bidy door closer hydraulically regulated of cast iron body, designation No.3 universal typesuitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete allas specified and as directed. |
| 84 | Fixing only aluminium chowkats / frame for door, windows and ventilator complete all as specified and directed. |
| 85 | S&F Aluminium beads with rubber gasket 20 mm width complete all as specified and directed. |
| 86 | S&F for Anodised aluminium frame powder coated for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifiedand directed. |
| 87 | S&F for Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, ruber neoprene packing, handles2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 88 | S&F for Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, hingesetc. complete all as specified and directed. |
| 89 | S& F 12 mm Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws toframe work complete all as specified and directed. |
| 90 | S& F 12 mm in repair Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed in repair with screws to timber frame work complete all as specified and directed. |
| 91 | S&F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 92 | S&F Sheet glass 5.5 mm thick fixed in repair ordinary quality and glazing with oil putty,beads in square exc 0.5 sq. m in each pane including hacking out old broken glass from frame complete all as specified and directed. |
| 93 | S& F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 94 | S&F 3D Wood grain printed PVC moulded sheet 5 mm thick of approved color and make in wall panelling with aluminium supporting frame of 50mm x 25mm at 60cm c/c fixed to walls & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion as required of PVC sheet beading fixed complete all as specified and directed. |
| 95 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includingfixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 96 | Demolition of brick work /stone masonry/pcc block masonry built in cementmortar of any description all as specified and directed. |
| 97 | M&L for pre-cast cement concrete block masonry Type C-11:3:6 (20 mm graded aggregate) with solid block ,exc 10cm in width and set in cement mortar 1:6 complete. |
| 98 | Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortars including backingin floors, aprons etc. |
| 99 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed. |
| 100 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring |
| 101 | M&L for virified ceramic tiles Darkshade 8-10mm thick (square/rectangular) polished ,area of each tilesexceeding 0.36 sqm but not exceeding 0.42sqm in floors ,in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM(1:6). |
| 102 | M&L for virified ceramic tiles Darkshade 8-10mm thick (square/rectangular) polished ,area of each tilesexceeding 0.36 sqm but not exceeding 0.42sqm indado skirtingetc set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering 10 mm thick in CM (1:6). |
| 103 | M&L hand cut kota stone slab flooring 20-25mm thick over cement screed base laid andjointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including screed bed 15 mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and directed. |
| 104 | M& L hand cut kota stone slab flooring 20-25mm thick as in vertical surface such as skirting and dado jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including backing coat of 15 mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and directed. |
| 105 | M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bedin CM (1: 6) complete all specified and directed. |
| 106 | All as per Item No 105 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as directed. |
| 107 | S&F 450x300x7mm thick glazed ceramic coloured tile on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed by Engineer -in- Charge. |
| 108 | M&L for 75mm thick PCC in (1:2:4) type B2 using 20mm graded stone agg as in sunken floor complete all as specified and as directed. |
| 109 | M&Lfor PCC 1:5:10 type E2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as directed. |
| 110 | M&L for PCC 1:1½ : 3 orBitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed |
| 111 | M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as directed |
| 112 | M&L for polythene flim black 50 micron laid in sunken floor complete all as directed |
| 113 | M&L for spout of 50mm bore PVC pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed |
| 114 | M&L for 25mm thick PCC 1:1.5:3 type A0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately) |
| 115 | S&FPVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle10 ltrs capacity incl brackets in repairs. |
| 116 | S&F vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection etc complete in repair |
| 117 | S&F in repairs Bib tap cast copper alloy fancy typechromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs |
| 118 | S&F in repairs Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs |
| 119 | S&F in repairs Stop valve fancy type cast copper alloy chromium platedscrewed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs |
| 120 | S&Fin repair cast iron Nahani trap with grating of diameter of outlet 100mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4). |
| 121 | S&Fin repair600mmx450mm bevelled edge mirror ofselected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed. |
| 122 | S&Fin repair vitreous china, squatting pan of \"Orissa\" pattern, long pan, size 580 mm x 440 mm, white, with \"P\" of \"S\" Trap, front or back inlet and foot rests any pattern, including concrete bedding and PVC low level flushing cistern 10 Ltr capacity including 32mm PVC flush pipe, all internal fitting, inlet, outlet pipe connections etc. complete all as specified and as directed. |
| 123 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) |
| 124 | M&L for 100mm thick PCCtypeB-2 (1:2:4) using 40mm graded stone aggregates as inflooring finished even and smooth w/o usin extra cement . |
| 125 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregatesfinished even and smooth w/o using extra cement |
| 126 | M&L for Sand filling under floor including watering and consolidation complete all as directed. |
| 127 | M&L forpre-cast concrete machine pressedrubber moulded glossy finished interlocking paver Blockof 60mm thick M-35 grade any colour (as approved) and design Over sand cushioning complete includingwith using grey cement and pigment any shape and size confirming to IS-15658-2006 all asspecified. |
| 128 | M&L for Coloured chequerred cement concrete exterior glazed tiles of size 30cmx30cmx10mm thick in floor laid and jointed in cement slurry and pointed in grey cement and pigment over 20 mm thick screed bed in CM (1:6). |
| 129 | Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets. |
| 130 | S&F aluminium snap grid powder coated frame work for false ceiling, size of grid 605 x 605mm along with 4mm dia mild steel wire class 3 as in suspenders complete all as specified and directed by Engr-in-Charge. |
| 131 | S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium all as specified. |
AI Tender Summary
Tender Timeline
Jun 21, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 28, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 28, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender