Military Engineer Services-MES has published Tender For Repair To All Type Of Wooden Furniture Under Ge (East) Jalandhar Cantt. Submission Date for this Tender is 28-06-2023. Wooden Furniture Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-06-2023 |
| Sl. No. | Item Description |
| 1 | CHAIR DINNING (Drg No. FD- 228 & 279) Taking out old unserviceable leg and supply and fixingthe front leg of sheesham wood Ist class made to shape , joint fixedwith bamboo pinsand fevicol by making Tennon Groove joints all as specifiedand as shown in drg wroughton all sides includingdismantling& removing of all unserviceable legs from the framecomplete all as specified. |
| 2 | All as per srl item No 1.00 here-in-before but rear leg |
| 3 | All as per srl item No 1.00 here-in-before but side/back/front rail of seat |
| 4 | All as per srl item No 1.00 here-in-before but stiffener of back |
| 5 | All as per srl item No 1.00 here-in-before but stiffener to legs short/long |
| 6 | Material & labour for caning of chair with 2mm wide plastic white/cream colourcane in Godrej pattern all as shown in drawing and as specifiedincluding taking down old unserviceablecane . |
| 7 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 8 | CHAIR EASY (Drg No. FD-223 & 229) Taking out old unserviceable leg and supply & fixing the front leg offirst class hard wood (sheesham wood) made to shape, Joints fixed with bamboo pins and fevicol by making Tenon/Groove Joint of size and section as specified and shown in drg wrought on all sides as directed by Engineer-in-Charge. |
| 9 | All as per srl item No No 2.00 here-in-before but rear leg |
| 10 | All as per srl item No 2.00 here-in-before but stiffener |
| 11 | All as per srl item No 2.00 here-in-before but arms |
| 12 | Material and labourfor canningof chair with 2mm plastic white /cream cane in Godrej pattern as shown and as specified and all as directed. |
| 13 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 14 | CHAIR WRITING (Drg No. FD-250 & 280) Taking out old unserviceable front leg and supply and fixing new front leg made offirst class hard wood (sheesham wood) made to shape, joints fixed with bamboo pins and fevicol by making Tenon/Grooves joints of size and section as specified and shown in drawings, wrought on all sides, andas directed by Engineer-in-Charge. |
| 15 | All as per srl item No 3.00above but rear leg |
| 16 | All as per srl item No 3.00 above but front/ side/backall as specified and directed. |
| 17 | All as per srl item No 3.00 above but back stiffener. |
| 18 | All as per srl item No 3.00 here-in-before but arms |
| 19 | Material & labour for caning of chair with 2mm wide plastic white/ cream colour cane in Godrej pattern all as shown in drawing and as specified including taking down old unserviceablecane. |
| 20 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 21 | CHAIR WB Taking out old unserviceable front leg and supply and fixing new front leg made offirst class hard wood (sheesham wood) made to shape, joints fixed with bamboo pins and fevicol by making Tenon/Grooves joints of size and section as specified and shown in drawings, wrought on all sides, andas directed by Engineer-in-Charge. |
| 22 | All as per srl item No 4.00above but rear leg |
| 23 | All as per srl item No 4.00 above but front/ side/backall as specified and directed. |
| 24 | All as per srl item No 4.00 here-in-before but seat of plywood 6mm thick commercial ply duly perforated as shown on drg and fixed with steel screw and as directed |
| 25 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 26 | CHAIR DINING CUSHIONED (Drg No. FD/E6/MAP-I/02) Material and labour in replacement of the following components of chair dining offrs without disturbing the other component including tightening of frame all as specified and shown on drg. The work will be executed either at site of at BSO furniture yard to avoid the loos of manpower and transportation. |
| 27 | Removing of existing old worn out/ unserviceable tapestry cloth from seat of chair dining cushioned and providing new tapestry cloth fixing in shape on 12mm thick ply all as per existing and as shown on drg and as per design of existing chair |
| 28 | Removing of existing old worn out/ unserviceable foam from seat of chair dining cushioned and providing new polyurethane foam cushion 75mm thick, 40 density and fabric fixing in shape on 12mm thick ply all as per existing and as shown on drg and as per design of existing chair. Make of foam : Sleep Well/ Kurlon/ Sweet Dream |
| 29 | All as per srl item No 5.02 here-in-before but rear leg |
| 30 | All as per srl item No 5.02 here-in-before but front/ side/back rail of seat all as specified and directed. |
| 31 | All as per srl item No 5.02 here-in-before but stiffener of back all as specified and directed. |
| 32 | All as per srl item No 5.02 here-in-before but stiffener to legs short/ long all as specified and directed. |
| 33 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 34 | TABLE WRITING (Drg No. FD-249 & 1116) Material and labour for providing table top of size 1200mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge. |
| 35 | All as per srl item No. 6.00 here-in-before but leg of sheesham wood complete. |
| 36 | All as per srl item No. 6.00 here-in-before but side rail of sheesham wood complete |
| 37 | All as per srl item No. 6.00 here-in-before but stiffener of Sheesham wood complete. |
| 38 | All as per srl item No. 6.00 here-in-before but side box with drawer |
| 39 | All as per srl item No. 6.00 here-in-before SS lock |
| 40 | All as per srl item No. 6.00 here-in-before Knob for drawer |
| 41 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 42 | TABLE 900MM X 600MM X 760MM WITHOUT DRAWERS (Drg No. FD-284) Material and labour for providing leg of sheesham woodof table 900mm x 600mmm x 760mm and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge. |
| 43 | All as per srl item No. 7.00 here-in-before but front rail of sheesham wood complete. |
| 44 | All as per srl item No. 7.00 here-in-before but side rail of sheesham wood complete. |
| 45 | All as per srl item No. 7.00 here-in-before but stiffener of sheesham wood complete. |
| 46 | All as per srl item No. 7.00 here-in-before but table top of size 900mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete. |
| 47 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 48 | TABLE DINNING FOR 6 PERSONS (Drg No. FD-273 & 1115) Material and Labour for providingtable top of size 1500mm x 900mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge |
| 49 | All as per srl item No. 8.00 here-in-before but leg of Sheesham wood complete |
| 50 | All as per srl item No. 8.00 here-in-before but front or rear rail of sheesham wood complete. |
| 51 | All as per srl item No. 8.00 here-in-before but side rail of sheesham wood complete. |
| 52 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 53 | TABLE 900MM X 600MM X 760MM WITH DRAWERS (Drg No. FD-224 & 283) Material and labour for providing leg of Sheesham wood complete of table size 900mm x 600mmm x 760mm and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge. |
| 54 | All as per srl item No. 9.00 here-in-before but front rail of sheesham wood complete. |
| 55 | All as per srl item No. 9.00 here-in-before but side rail of sheesham wood complete |
| 56 | All as per srl item No. 9.00 here-in-before but stiffener of sheesham wood complete |
| 57 | All as per srl item No. 9.00 here-in-before but drawer of 6mm plywood complete |
| 58 | All as per srl item No. 9.00 here-in-before buttable top of size 900mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete. Make : Novapan |
| 59 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 60 | TABLE DINNING FOR EIGHT PERSONS (Drg No. FD-239 & 1115) Material and labour for providingTable top of size 1800mm x 900mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge. |
| 61 | All as per srl item No. 10.00 here-in-before leg of Sheesham wood complete |
| 62 | All as per srl item No. 10.00 here-in-before but front or rear rail of sheesham wood complete. |
| 63 | All as per srl item No. 10.00 here-in-before but side rail of sheesham wood complete. |
| 64 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 65 | TEAPOY (Drg No. FD-278 & 232) Material and labour for providingFront or Rear leg of first class hard wood(sheesham wood) complete of Teapoy dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge. |
| 66 | All as per srl item No. 11.00 here-in-before but front or Rear rail of sheesham wood complete. |
| 67 | All as per srl item No. 11.00 here-in-before but side rail of sheesham wood complete. |
| 68 | All as per srl item No. 11.00 here-in-before but top of size 600mm x450mm made out of 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked complete. |
| 69 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 70 | TABLE PEG (Drg No. FD-277 & 236) Material and labour for providing Leg of Sheesham wood complete of Table Peg and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge. |
| 71 | All as per srl item No.12.00 here-in-before but front/back/side rail of sheesham wood complete. |
| 72 | All as per srl item No. 12.00 here-in-before but table Top of size 450mm x 300mm made out of 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked complete |
| 73 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 74 | TABLE CENTRE (Drg No. FD-235 & 274) Material and labour for providing front or Rear leg of Sheesham wood complete of Table Centre and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge |
| 75 | All as per srl item No. 13.00 here-in-before but front or rear or side rail of sheesham wood complete . |
| 76 | Table Top of size 900mm x450mm made out of 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked complete. |
| 77 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 78 | TABLE BED SIDE FD/E-6/MAP/15(R) Material and labour in repair of the following part without disturbing the other component including tightening of frame all as per existing and directed |
| 79 | Supply and fixing shelves made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification |
| 80 | Supply and fixing sides made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification |
| 81 | Supply and fixing 18mm MS Sq front leg (18 gauge) as per existing size by applying two coat of black synthetic enamel paint over a coat of red oxide primer and as specified and shown on drg |
| 82 | Supply and fixing 18mm MS Sq rear leg (18 gauge) as per existing size by applying two coat of black synthetic enamel paint over a coat of red oxide primer and as specified and shown on drg |
| 83 | Supply and fixing 6mm thick commercial ply BWR for back side all as per existing and as directed |
| 84 | Supply and fixing heavy duty channels to drawers as per existing and as directed |
| 85 | Supply and fixing CP handle to drawers as per existing and as directed |
| 86 | Supply and fixing top made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification |
| 87 | Removing of unserviceable shoes and supply & fixing new rubber shoes as approved |
| 88 | SIDE BOARD (Drg No. FD- 112, 241, 371 & 1112) Material and labour for replacement of unserviceable broken top of side board of thickness 18/19mm pre laminated particle boardexterior grade Including taking out the old part from the items as specified and directed by the Engineer-in-Charge. |
| 89 | All as per srl item No 15.00 here-in-before but shutter Door of 18/19mm thickpre laminated particle boardexterior grade, Fixed with 4mm thick TW beading all round. Including taking out the old part from the item as specified and directed by the Engineer-in-Charge |
| 90 | All as per srl item No 15.00 here-in-before but shelf of 18/19mm thick prelaminated particle board exterior grade |
| 91 | Material and labour for repairing /replacement of Drawer made out of 18/19mm plywoodprelaminated particle board exterior grade alongwith fixing of fancy Knob to the drawer as specified and directed by theEngineer-in-Charge. |
| 92 | Material and labourfor fixing of 4 mm teak wood beading in front of side boardas required and shown on drgs |
| 93 | Material and labour for repairing /replacement of Ply wood6mm thick fixed at rear portion of the side boardcomplete all as specified and directed by theEngineer-in-Charge. |
| 94 | Material and labour for replacement of unserviceable long rail made out of first class Indian teak wood well seasoned and free from Knots as specified and directed by theEngineer-in-Charge. |
| 95 | All as per srl item No 15.06 here-in-before but short rail. |
| 96 | All as per srl item No 15.06 here-in-before but leg of side board |
| 97 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 98 | BOOK CASE (Drg No. FD - 237) Material and labour Legs made out of 1st class Teak wood of size 45mmx45mm up to 40mm from top of legs and 25mm x25mm in section at bottom of legs. The Legs shall be 100mm high fixed together with 25mmx40mm in section Teak wood Rails in short and long sides including taking out the old/UNSV parts from Book case as shown on drawing and as directed by Engineer-in-Charge |
| 99 | All as per srl item No 16.00 here-in-before but top made out of 19mm thick Block Board Commercial with 1 mm thick pre-laminated sheet fixed over it with the help of Fevicol. |
| 100 | All as per srl item No 16.00 here-in-before but shelf in cupboard in the left side shall be 380mm wide and 12mm thick Teak Veneer shade particle board exterior grade one side and commercial other side as shown on drawing. |
| 101 | All as per srl item No 16.00 here-in-before but Shelves on the other side of Book Case made out of 12mm thick Teak Veneer shadeParticle Board on one side and other side commercial exterior grade as shown on drawing. |
| 102 | All as per srl item No 16.00 here-in-before but shutter of 380mm cup board made out of 19mm thick particle Board Teak Veneer surface on one side and commercial on other side exterior grade fixed to side of Book Case with help of Piano type hinged including one chromium plated knob and ball spring catch fixed to the shutters all other shown on drawing. |
| 103 | All as per srl item No 16.00 here-in-before but Back of Book case shall be made out of 6mm thick Ply wood commercial grade and fixed with head less Nails. |
| 104 | All as per srl item No 16.00 here-in-before but all front edges of particle board all around the shutters of cup board shall have 3mm thick teak wood edging of width equal to thickness of particle board complete all as specified and directed. |
| 105 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 106 | TABLE DRESSING LADIES (Drg No. FD-251) Material and labour Legs made out of 1st class Teak wood of size 45mmx45mm in section at top of legs and 25mm x25mm in section at bottom of legs. The Legs shall be 150mm high & shall be joined together with 40mm x25mm in section stiffeners in long and short sides joining legs at top including taking out the old/UNSV parts from Table dressing ladiesas shown on drawing and as directed by Engineer-in-Charge. |
| 107 | All as per srl item No 17.00 here-in-before but two drawers made out of 12mm thick plywood BWP of size 310mmx130mmx320mm depth including fixing of Two Nos Knob to drawers complete all as specified and directed. |
| 108 | All as per srl item No 17.00 here-in-before but Two Nos of Glass Shutters5.00mm fixed alongwith two way aluminium channel of required thickness a space of 550mm on left handside of table dressing ladies as specified and directed by the Engineer-in-Charge. |
| 109 | All as per srl item No 17.00above buttop made out of 19mm thick commercial particle board over which 1.5mm thick plastic laminated sheet teak face sheet shall be fixed as shown on drawing. |
| 110 | All as per srl item No 17.00 here-in-before but Back made out of 12mm thick particle board with commercial ply wood on both side exterior grade all as shown on drawing. |
| 111 | All as per srl item No 17.00 here-in-before but Teak wood vertical support out of 45mmx45mm shall be provided to back of mirror as shown on drawing. |
| 112 | All as per srl item No 17.00 here-in-before but Supply and fixing of Looking Mirror 5.00mm thick 355mmx1220mmfree from all defects, distorted images etc as shown on drawing. |
| 113 | All as per srl item No 17.00 here-in-before but Replacement of 6mm thick commercial plywood backing of mirror. |
| 114 | Material and labour for scraping /removing of existing old polish by old knife or broken glass piecesand sand paperingto make the surface smooth and all exposed surface shall be polishing with French polish of high glossy finish as directed. |
| 115 | TABLE DRESSING GENTS (Drg No. FD-230) Material and labour for box of table dressing gents made out of pre laminated particle board 19mm thick with veneer face as shown on drawing over all size of box shall be 900mm long 300mm wide and 150mm high over which 20x40mm thick teak wood beading shall be fixed includingtaking out the old/UNSV parts from Table dressing ladiesas shown on drawing and as directed by Engineer-in-Charge |
| 116 | All as per srl item No 18.00 here-in-before but two drawers equally spaced having 255mm in the middle . Frontdrawer of 12mm thick pre-laminated particle board teak veneer face sidesof the drawer shall be of 12mm thick teak plank running smoothly in the drawer .The bottom and back of drawers shall be 6mm thick ply wood commercial front face of shelves shall have 3mm thick teak wood edging as shown on drawing . |
| 117 | All as per srl item No 18.00 here-in-before but two Nos of Knob shall be fixed to drawers |
| 118 | All as per srl item No 18.00 here-in-before but supply & fixingof looking mirror of size 410mm wide and 790 mm high 5mm thick along with wooden frameof size 25x20mm thick made to the shape as specified and directed by the Engineer-in-Charge free from distortion and other defects. |
| 119 | All as per srl item No 18.00 here-in-before butfixing of two supports of 25mm x 35mm x 1115mm teakwood batten on the back side of the mirror as shown on drg |
| 120 | All as per srl item No 18.00 here-in-before but fixing the 6mm thick plywood backing of mirror as specified and shown on drgs. |
| 121 | All as per srl item No 18.00 here-in-before but replacement of 3mm thick flat iron key plate of mild steel 25mmx25mmin section provided at top of mirror as directed by Engineer-in-Charge and painted with blackpaint. |
| 122 | Material and labour for scraping /removing of existing old polish by old knife or broken glass piecesand sand paperingto make the surface smooth and all exposed surface shall be polishing with French polish of high glossy finish as directed. |
| 123 | TABLE COMPUTER (DRG NO FD/E6/MAP/03) Material and labour for replacement of the following parts without disturbing the other components including tightening of frame complete all as specified, shown on drg and directed |
| 124 | Replacement of top of table computer of PLPB of size 900 x 600 x 18mm thick exterior grade with edges finished with 1.5mm thick PVC beading complete all as specifiedand directed |
| 125 | Replacement of key board tray with sliding channel as per existing patterncomplete all as specifiedand directed |
| 126 | Replacement of drawer with sliding channel as per existing patterncomplete all as specifiedand directed |
| 127 | Replacement of adjustable nylon buffer as per existing pattern complete all as specifiedand directed |
| 128 | HATSTAND WITH MIRROR (FD-233, 361, 362) Material and labour in replacement of the following components of hatstand with mirror complete all as specified and directed. The work will be executed either at site or at BSO furniture yard to avoid the loss of manpower and transportation. |
| 129 | Removing of existing old unserviceable broken mirror and supply & fixing new mirror as per drawing and as directed by Engineer-in-Charge. |
| 130 | Removing old broken/unserviceable base board of hatstand, supply and fixing of new block board 18mm complete as per existing & as directed by Engineer-in-Charge. |
| 131 | Removing old/unserviceable peg set of hatstand, supply and fixing of new peg set complete as per existing & as directed by Engineer-in-Charge. |
| 132 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 133 | STOOL DRESSING LADIES (FD/E6/MAP/14) Material and labour in replacement of the following components of stool dressing complete all as specified and directed by Engineer-in-Charge |
| 134 | Removing existing broken/unserviceable leg of stool dressing and providing and fixing new leg of sheesham wood complete all as specified and directed by Engineer-in-Charge |
| 135 | Supply and fixing front/back/side rail of sheesham wood all as per existing and as directed by Engineer-in-Charge. |
| 136 | Supply and fixing stool top of size 450mm x 450mm/ existing size made out of 12mm thick ply board exterior grade ISI marked and as directed by Engineer-in-Charge |
| 137 | Supply and fixing new cushion seat for stood dressing of existing tapestry cloth for seat of stool dressing (cost not less than Rs. 200/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The stool dressing shall be fixed on existing wooden frame after replacement as tapestry cloth all as existing and directed |
| 138 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 139 | BIN LINEN MULTIPURPOSE (Drg No. FD/E6/MAP/09) Material and labour in replacement of the following parts without disturbing the other component including tightining of frame complete all as specified and shown on drgs |
| 140 | Supply and fixing top made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro |
| 141 | Supply and fixing bottom made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro |
| 142 | Supply and fixing 18/19mm thick pre-laminated particle board on left/ right side as per existing shape & size Make of Board : Navapan/ Century/ Duro |
| 143 | Supply and fixing shutter made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro |
| 144 | Supply and fixing shelf made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro |
| 145 | Supply and fixing 12mm thick commercial ply as in backas per existing shape & size Make of ply : Kitply/ Greenply/ Century/ Duro |
| 146 | Replacement of drawer with sliding channel all as per existing pattern |
| 147 | Supply and fixing in replacement 50mm handle as per existing shape & size |
| 148 | Supply and fixing stiffener made out of 1st class hard wood as per existing shape & size |
| 149 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
