Tender For Conversion Of Modernization Lpg Firing System From Gasifier Crematorium At Usilai Road Burial Ground Intirumangalam Municipality
Tender Value
34.50 Lakhs
Estimated cost
Bid Submission
16 Jun 2023
0 days left
EMD
34500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Conversion Of Modernization Lpg Firing System From Gasifier Crematorium At Usilai Road Burial Ground Intirumangalam Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Service and replacement of scrubbing unit made of MS304 with Thickness 2mm, and Pipelines, Design & fabrication of high- speed impellor made of Material SS310 grade, Dimensions 500mm dia 150mm height and 3mm thickness – 1No. Design and manufacturing of impellor matching shaft of 65mm dia, 600 mm long, to match suitable bearing, Pulley, slated keyway, High speed SS Bearing UCB type – 2Nos, Matching pulley, matching poring and Slate keyway drilling Balancing of impellor at 1400 RPM Service of water spray and fixing of pipelines Coil winding of 5HP motor and replacement ofSuitable bearings. Service and replacement of ID Blower SS304. main door with open and close gear motor system connectedto Control panel at your existing Crematorium furnace |
| 2 | Service and replacement of body crematorium area bottom place Fire refractory bricks grade suitable size. Supply and fixing of body Placing bed IS8 slabs 40%aluminum 24 x 12 x 3(inches). Bed size 300mm height and2-meter long 600mm width body placing bed by fixing cast-ironframes.Removal of old damaged body placing bed. |
| 3 | Supply and fixing of Pipelines and ducting-fixing and welding. 20 mtr long, 300 mm dia, 4mm thick, flanges, boltnut,gasket, 90-degree bend including all labor charges etc |
| 4 | Design, fabrication, Supply and fixing of furnace Manual Operated main door Door dimension 1200mm x 1400mm x 225mm Door support given by MS Angles. Providing door Insulation material 96 grade fiber Blanket up to 1260 Deg Celsius lining fully supported by stainless steel studs 304 grade.Covering the door fully using mild steel. Handing over in smoothrunning condition. (Up and down movements) |
| 5 | Providing LPG manually firing system, includes following items,a) Supply and fixing of 10 cylinders manifold -1No,4 burners Non-return valve -10Nos, Metallic flexible hose -10 Nos, Main ball valve -1No, high Pressure regulator -1No,Needle valve with copper tube -1No, Pressure dial Gauge -1No,Flow control valve (1”) -1 No,High velocity burners (Ni-21% Cr-25%) -6 Nos,LPG pipeline 1” Dia -1Set, 1” Pipe flanges -1Set l), LPG pipeline ¾” Dia -1 Set,¾” Pipe flanges -1Set, Suitable Fasteners(Bolts, Nuts, & washers) -1Set, ¾” Ball valve -1No, 4” Dia 1 meter long 304 pipe -6Nos, 1” Dia 1 meter long 304-6 Nos, Hex Nipple 3mm Dia -6 Nos, 1’ union -4 Nos, Copper tube 1-meter long 8mm Dia -6 Nos,Copper tube 1 meter long 10 mm Dia -1No, ¾” Pipe nipple-10 Nos, Burner covering insulation material 1260 Deg C grade ceramic fibers work. The rate inclusive of all Materials and all labor charges etc.Providing burner fixing Holes of 4” dia at both sides of the wall atyour existing gasifier crematorium furnace |
| 6 | Semi Automatic LPG fired burner (35000 Cal) 4 Nos. Electrical Control Panel features:5hp blower- 1no 2hp water pump- 1noBurner Outputs - 4 nosTemp Controller - 1 nosTemparature couple - 1 nosCompensating cable - 1 setBurner to panel cables 10 core.75sqmm - 4set (65 MTRS) Sensor K-TYPE - 1 setAutomatic door up to down 0.5 HP 3 PH |
| 7 | Supply and fixing operating control panel backup DG set, temperature controller, voltmeter, ammeter, main onoff switch, MCB relay, on off indicator switches, indicatorlamps, connecting wires and cables. |
| 8 | Supply and fixing of manual body loading trolley, Making rail on both side 75*40*6 channel, Arm 75*40*6 channel, suitable bearing shaft, handle wheel 230mm dia, 550mm thickness, moving suitable taper rollers with suitable bearing etc. |
| 9 | Providing Through Vertical Joint with 12mm space filled with bitumenous compound running from bottom of foundation upto the top of parapet wall as directed- 10 m2 (S.I.149) |
AI Tender Summary
Tender Timeline
Jun 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 16, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender