Tender For Providing Stainless Steel Bus Shelter At Near Old Prabhath Theatre In Ward No 30
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Jun 2023
0 days left
EMD
14000
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tiruchirappalli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Stainless Steel Bus Shelter At Near Old Prabhath Theatre In Ward No 30
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in ordinary soil with initial lead and lift etc., complete as per standard specification (Narrow excavation) |
| 2 | Supplying and filling with M.Sand inlayers of 15cm thick includingwatering and ramming for consolidation etc. including cost and conveyance of sand and filling etc. complete |
| 3 | Plain cement concrete 1:5:10 (one cement, five M.Sand and ten aggregates) mix using 40mm gauge hard broken granite stone jelly for foundation and flooringetc. complete |
| 4 | Providing steel centering shuttering with necessary strutting arrangements for sides and soffits of RCC columns,sunshade etc., including cost and conveyance of all materials at site and all labour charges and other incidental charges etc.complete |
| 5 | Plain cement concrete 1:2:4 (one cement two M.Sand and four aggregates) mix using 20mm ISS gauge HBBG metal including cost and conveyance of all materials and labour charges for mixing, laying, complete |
| 6 | Flooring with Cement Based Hydraulically pressed Anti Skidtiles of approved quality of size 30cmx 30cmx 6cm laid in cement mortar 1:3 mix 20mm thick and pointing with the same mortor etc., completely and finish perfectly. |
| 7 | Supplying and fixing inposition of pvc painted Galvanium sheet corrugated roofing with 0.47mm FRB thick with painted coat lncluding cost of bolt,nut and washer etc.complete. |
| 8 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains ( SD -65) |
| 9 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class \"B\") suitably bent at both ends with necessary angle iron upright and end supports for mains (SD -70) |
| 10 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB\"s should be with ISI mark (like standard make) -(SD 167) |
| 11 | Supply and Fixing ofED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) 30W LED Street Light Fitting with LED including all labour charges complete as directed by the departmental officers. |
| 12 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (SD- 21) |
| 13 | Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is - 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25+ 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer |
| 14 | Supplying ,Fabrication and fixing of Stainless Steeland polishing work of approved design using necessarry size of SS Pipes, Hollow sections ,angles, rods and flates including cost of materials and labour charges etc, complete. |
AI Tender Summary
Tender Timeline
Jun 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 09, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender