Tender For Removal Of Potholes On Bhaderwah Chamba Road Km 40Th (Under Potholes)
Tender Value
49.80 Lakhs
Estimated cost
Bid Submission
09 Jun 2023
0 days left
EMD
99600
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhaderwah → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Removal Of Potholes On Bhaderwah Chamba Road Km 40Th (Under Potholes)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On W.B.M. @ 0.75 Kg/sqm. |
| 2 | Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On bitumen surface @ 0.50 Kg/sqm |
| 3 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. |
| 4 | 2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt |
| 5 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. |
| 6 | Providing and erecting \"W\" metal beam crash barrier with glow studs comprosing of 3mm thick corrugated sheet metal beam rail 70cm above road / ground level on ISMC series channel vertical post 150 x 75 x 5mm spaced 2.0mtr C/C 1.80m height , 1.10 nelow ground / road level all seel parts and fixed to be galvanised by hot dip progress all fitting to confirm IS : 1367 and IS 1364 and fixing of ports 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of Pedstal size (0.60 x 0.60 x 1.10) including all leads, lifts , concreting works and carriages etc (Complete Job ) |
| 7 | Carriage of sand / stone aggregate for an Avg. distance of 45 Kms by MT |
AI Tender Summary
Tender Timeline
Jun 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender