Smart City Development Limited has published Tender For Beautification And Redevelopment Of Thornhill Road From Dhobi Ghat Crossing To Indira Gandhi Crossing In Prayagraj Under Smart City Mission. Submission Date for this Tender is 09-06-2023. Road Work Tenders in prayagraj Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Dismantling of lime or cement mortar brick work including stacking of dismantled materials with in 60m distance as directed by Engineer in charge. |
| 3 | Same as in above item but of RCC or RB work |
| 4 | Extra item for clearing jungle including of rank vegetarion, grass, bush, wood trees and saplings of girth upto 30 cm. measured at a height of 1.00 mtr. Above ground level & removal of rubbish upto a distance of 50mtr. outside the periphery of area cleared. Excluding GST ( As per SOR 2020 Item no 259 @ 5 rs. Per Sqm) |
| 5 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material |
| 6 | Beyond 30 cm girth upto and including 60 cm girth |
| 7 | Exacavation in ordinary soil (Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST |
| 8 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 9 | Structural Steel works In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 10 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 11 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 12 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: |
| 13 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete |
| 14 | Cement concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 1:3:6 including supply of all materials, labour, tools & plant ec reuired for proper completion of the work. Excluding GST |
| 15 | M-150 Brick work in 1 cement and 5 fine sand (F.M. 1.25) mortar in super structure including necessary cutting and moulding of brick as required thickness of walls not to be less than 1 1/2 brick including supply of all materials, labour & tools & Plants etc. required for proper completion of the work. Excluding GST |
| 16 | As in above item but in super structure including necessary cutting and moulding of brick work as required thickness of wall not to be less then 11/2 brick. Add extra labour to above items. |
| 17 | 12 mm thick cement plaster with cement & fine sand mortar in proportion of 1:6 complete, Excluding GST |
| 18 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.M-25 grade with minimum cement content of 330 kg/cum |
| 19 | Construction of granular sub-base by providing close graded material of Grade-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 20 | RCC Work with cement approved coarse sand and 2 cm. Gauge approved stone grit in proportions of 1:2:4 in R.C.C raft foundation and footing excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc required for proper completion of of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra excluding GST. as in item 283 above but in RCC raft foundation and footing M-20 |
| 21 | Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level/above plinth level. |
| 22 | 2.5 cm thick Damp Proof Course with cement and approved coarse sand 1:1 1/2 with an dincluding water proofing material as ordered by the Engineer Incharge in the proportion as specified by the manufactures including supply of all materials, labour and tools & Plants etc required for proper completion of work an dincluding curing and shuttering as necessary. |
| 23 | Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Painting or varnishing new work in small areas or new wood work with Two coat of approved superior quality ready mixed paint or varnish including supply of all materials , labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the I.S.I. no-103-1950 |
| 25 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 26 | Distempering (every coat after first coat or subsequent coat) with oil bound ditemper of approved brand and manufacture & of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J and N Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings and other forign materials and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials, labour, T&P etc. |
| 27 | Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 28 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 29 | CONCRETE RCC PrecastBollards 950x150mm, Material RCC State-Solid Shape-Cylindrical Usage-Outdoor, Road |
| 30 | Antique 4 Seater Dholpur Sandstone Garden Bench We are providing a vast array of Stone Bench, which is available in dissimilar patterns. |
| 31 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-inCharge. |
| 32 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 33 | Supply & fixiing 110 mm diameterU-PVC pipes as per Engineer incharge |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes |
| 35 | 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern |
| 36 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 37 | 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cemen mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered withcement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar (Red Sand Stone) |
| 38 | Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab |
| 39 | Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. (At the Center&Edge) |
| 40 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. |
| 41 | Providing and erecting 60cm side triangularMandatory retroreflectorized sign as per IRC 67 2012 having 4 mm thick Aluminium composite material sheet, face to be fully covered with Class C Type XI (Table 5) Micro Prismatic Grade Sheeting as defined in IRC: 67-2012 having approved massages e.g. letter, numerals,symbols/legend/arrow etc. in Hindi and /or English, to be cut out from durable transparent Overlay Film Electrocutable film as per drawing and Technical Specifications for Road and Bridge works (Fifth Revision). |
| 42 | Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. |
| 43 | Providing & laying colored and textured imprinted cast in place concrete flooring applying finishing the top surface, in accordance with sprinkling of colourhardner at the rate of 22.7kg/sqmt. Floating the surface application of release agent, stamping the concrete with stamping tools, cleaning the surface with water jet (next day) and application of acrylic based sealer for finishing complete as per direction of the Engineer in charge. the work includes providing and laying av. 100mm thick M20 grade BMC/RMC concrete including well compaction necessary finishing Top surface, sides supports, levelling ,pumping curing compounds etc.complete Treatment of construction joints by groove cutting of size4mmx20mm in panel size.approximately 3mtrx3mtr and filling the same with 6mmbraker rod and providing & laying PU based joint sealer Impactflex 100 or equivalent etc(Bomanite or Equivalent) all completes as per approved design, pattern & direction of EI. (P.D. Todan Road) |
| 44 | Providing & fixing Chunar Cobble Stone Flooring (150X150X150)mmStone Laid onwith filling of joints in 1:3 Cement mortarwith matching colour pigments all complete specification & direction of Engineer in charge. |
| 45 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.70 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. |
| 46 | Providing and laying Dense Graded Bituminous Macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 4.0 to 4.5 percent by weight of total mix and filler, transported to site, laid over a previously prepared surface with hydrostatic paver finisher with sensor control to required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achievethe desired compaction as per the MoRTH specification Clause No.507 complete in all respects. |
| 47 | Providing and laying Bituminous Concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. |
| 48 | 6M Span over Structure with 300 dia MS one vertical post Supply, fixing & erection of built up dia heavy class M.S. pipe and 40 mm dia heavy MS pipe as bracing mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC foundation of size 0.90x0.90x1.50 m of required depth as per site condition for built up structure including Earth work in excavation, 100 mm thick lean Concrete in 1:3:6 cement coarse sand and 40 mm gauge stone ballast RCC with and 1:2:4 cement coarse sand and 200 mm stone grit including supply and fixing of 25 mm dia foundation bolts 600 mm long as per provision of 5 structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 -2010 complete in all respect. The rates shall include cost of design fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in charge. |
| 49 | Retro Reflective Signs (Type-XI sheet). Providing and fixing retro-reflective signboards comprising of customized modular PU Epoxy Coated MS angle iron framework, aluminum composite panel (ACP) as base board, micro prismatic retro reflective sheet and electro cut colored overlay film. Latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No. panel size shall be more than one Sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop reverting or with self taping SS screws 5mm dia spaced not more than 300mm center to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro reflective sheet conforming to Type-XI of ASTM: D 4956-09 shall be pressure fixed. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012& proof of the same in form of government report shall be uploaded wile quoting tender. The rate shall include all materials, labor, equipment’s, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-charge. Signage on MS angle frame of (35x35x5)mm |
| 50 | TYPE 1 traffic sign board - Rectangular board of size 1830mm x 1220 mm (Junction advance direction sign) |
| 51 | TYPE 2 traffic sign board - Trapezoidal board of size 1830mm x 1220 mm (Place identification sign) |
| 52 | TYPE 3 traffic sign board -Equilateral triangle boards of side 600mm (Warning sign) |
| 53 | TYPE 4 traffic sign board - Circular boards of diameter 600mm (Mandatory sign) |
| 54 | TYPE 5 traffic sign board - Rectangular boards of size 600mm x 45 mm (Warning chevron sign) |
| 55 | TYPE 6 traffic sign board - Rectangular boards of size 600mm x 45 mm (Warning chevron sign) |
| 56 | TYPE 7 traffic sign board -Two flag type boards of size 800mm x 200mm with one board mounted on another (Street name sign) |
| 57 | TYPE 8 traffic sign board -Rectangular boards of size 800mm x 600mm (Facility information sign) |
| 58 | TYPE 9 traffic sign board -Rectangular boards of size 900mm x 300mm (Object hazard marker sign) |
| 59 | Color-As per requirement,Size/Dimension-As per requirement,Material-FRP Brand-Good thickness,Type-Statue,Height-10- 20 Feet |
| 60 | FRP Maharana Pratap Statue, For Decoration,Usage/Application Decoration-Material,FRP-Finishing,Polished-Height-10 feet |
| 61 | White FRP garden statues, For Interior Decor, Size/Dimension: 3 Feet |
| 62 | New Arts Luxury Tent,uilt Type-Modular,Shape-Tunnel,Color-White,Material-FRP,,Pole Material-Aluminum-Is It Waterproof-Waterproof,Number Of Pillars-04 Product Type-TENSILE UMBRELLA-Sail Finishing,PVC,Height-10-15 Feet |
| 63 | White Human Surya Namaskar Fiber Statue, For Exterior Décor,Size-6x2feet,Shape,Human,Usage/Application,Exterior Décor,Color-Red,Base Shape-Rectangle different shape as per engineer incharge |
| 64 | Sandstone Sand Stone Lamp Pillar Material Sandstone-Shape,Square (Base Shape),Height-5 - 6 feet |
| 65 | Supplying and Fixing of Red stone bench having thickness of top slab not less than 3" fitted with Stone rectangle block of size not less than 30x30 Cms at both ends. Length of Bench should not be less than 6 ft (end to end support).width of bench 2 feet and height 1.75 feet as per design and drawing complete in all respect as directed by engineer in charge modern,Usage/Application-garden and other outdoor places,Arm Rest-Without Arm Rest, Appearance-Shape-Regular and uniqueColor-brown,Features-Solid and life long usage, Garden Bench by Unique Marble Arts. |
| 66 | Stone Natural Rock Water Fountain Material Stone-LED Underwater Light-Yes,Location Type-Outdoor LED Light-Yes all Complete work as per site Engineer. |
| 67 | Green Pvc Coated Chain Link Fence, 1 To 4.5, 3mm To 4mm GI,PVC Coated GI, green |
| 68 | Electrical Work |
| 69 | S/F of Double Pole Structure of 410 SP/55 11 M. long Pole STP in 1:3:6 CC foundation with 3 with 3 No. M long 100 mm x 50 mm x 5 mm and 2 No. 2 M. long 75 mm x 40 mm x 5 mm MS Channel, 2 No. 2.5 M. long 50 mm x 50 mm x 5 mm Angle Iron Bracing and 14 No. 38 mm x 6mm D Clamp with necessary Packing Pieces complete with 250 KVA 11/0.433 KV, Level-2 BIS Standard, as per present UPPCL"s Specifications & approved make includingPole mountedTransformer 11 KV TPMO & Fuse Set, earthing etc,Rate excluding deducting Plinth & LT MCB Box. |
| 70 | S/F of factory fabricated and wired metal Gland dust & vermin proof floor mounting distribution TPN feeder pillar with incoming 400 Am. 1 Nos MCCB and outgoing 200 Amp 2 Nos. = 63 Amp 1 Nos cubical type with required bus bar as IS 8623 with Insulated Heat Shrink sleeving and mounting on non Hygrscotic support as CMC/BMC. With 3 No indicator, The Pillar should be fabricated with CRCA sheet 2 mm thick Painted with High quality Pint with locking arrangement complete with cable Gland complete. |
| 71 | S/F of TPN/ Telex Feeder Pillar Cubical Box made of 45mm x 45mm x 5mm Angle Iron frame and 14 SWG MS Sheet with Both side Locking arrangement. Dust and Vermin Proof consisting with Copper Bus Bar on Henry type Fuse unit on 2 No. 500 Amp and 3 No. 300 Amp. Tailless unit Complete the Box shall be Painted with approved aluminium Paint over Red Oxide Primer in 1:3:6 CC foundation as directed by E/I. |
| 72 | S/F of 200 Amp Bus bar Box made of 16 SWG CRCA Sheet including TPN Aluminium Bus bar complete with locking arrangement with required Clamps nuts & bolts and grouting / .Fixed on Wall (if required on Angle stand angle will be measured in MS Items) |
| 73 | S/L of Aluminium conductor PVC Insulated armored served sheathed 400Sq mm x 3.5 Core LT cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 756 mm. Thick sand all around and protected withburnt bricks on sides and on top. On surface the cable run shall be fixed on M. S. clamps etc. of suitable sie or as directed by the E/I, complete in all respect. |
| 74 | Same as Above but size 240 Sq mm x 3.5 Core |
| 75 | Same as Above but size 120 Sq mm x 3.5 Core |
| 76 | Same as Above but size 50 Sq mm x 3.5 Core |
| 77 | Same as Above but size 16 Sq mm x 4 Core |
| 78 | S/L of 3 Core standard aluminium conductor XLPE (Cross linked Polyethylene) insulated PVC bedded, Galvanized flat steel strip armored 185 Sq mm 3 Core 11 KV grade cable confirming to I. S. 7098 ( Part-II with latest amendment)at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river. sand all around and protected with well burnt bricks in sides and on top part across. The armoring of cable shall be properly connected with earth conductor by clamps etc. |
| 79 | Same as Above but size 70 Sq mm x 3 Core |
| 80 | S/F of 185 Sq mm 11 KV Joint Kit complete. Rate PSR |
| 81 | S/F of 70 Sq mm to 120 Sq mm 11 KV Joint Kit complete |
| 82 | S/F of 400 Sq mm cable Lugs (Item asUPPWD SOR 18) |
| 83 | S/F of 240 Sq mm cable Lugs (Item asUPPWD SOR 18) |
| 84 | S/F of 120 Sq mm cable Lugs (Item asUPPWD SOR 18) |
| 85 | S/F of 50 Sq mm cable Lugs (Item asUPPWD SOR 18) |
| 86 | S/F of 16 Sq mm cable Lugs (Item asUPPWD SOR 18) |
| 87 | S/F of 400 Sq mm cable Glands (Item asUPPWD SOR 18) |
| 88 | S/F of 240 Sq mm cable Glands (Item asUPPWD SOR 18) |
| 89 | S/F of 120 Sq mm cable Glands (Item asUPPWD SOR 18) |
| 90 | S/F of 50 Sq mm cable Glands (Item asUPPWD SOR 18) |
| 91 | S/F of 16 Sq mm cable Glands (Item asUPPWD SOR 18) |
| 92 | Trench less Drilling with HDPE 100 mm dia HDD for carrying of Cable on Road Crossing complete with Repairing of all internal water connection/Sever Connection if necessary complete |
| 93 | Dismantling & Store /Street light Poles /PCC/Rail as per direction of UPPCL with Loading unloading cartage of Pole embedded in brick ballast & CC foundation etc. as required. |
| 94 | Dismantling of over head lines Wires comprising of copper/aluminium overhead conductor, G .I, wire, cross arms, insulators etc, as Required & Deposite as per direction of UPPCL with Loading unloading cartage of all material with proper listing. |
| 95 | Dismantling & Removal of 11 KV S/S Transformer with Loading Unloading with Proper shifting including connections Structure Complete. Rate PSR |
| 96 | S/F Steel tubular Pole 9 M.Long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. |
| 97 | S/F Steel Tubular Pole 11 M. long designated 410 SP/55 in 1:3:6 cement concrete foundation including excavation back filling etc. Complete in all respect. Rate based on S.I. No. 613/2018 on Weight basis |
| 98 | S/E of ""D"" clamps of 50 mm x 6mm flat iron on steel tubular Poles/steel rail pole x with bolts, nuts etc. complete in all respects including painting with aluminium paint. |
| 99 | S/E of 600 mm long cross arm of 50 mm x 50 mm x 6mm mild steel angle iron with necessary clamp, bolts, nuts etc on poles complete in all respects including painting with aluminium paint. |
| 100 | S/F of MS Channel, V shape, Bracing,Angel, Clamps and other required MS Iron Items etc. Rate PSR |
| 101 | S/f of 11 KV Pin insulator complete with Pin, Nuts, & Bolts complete with Gun fitting complete. |
| 102 | S/f of 11 KV Disc insulator complete with Fittings , Nuts. & Bolts complete with Gun fitting complete |
| 103 | S/E of Stay set at least 3.5 M. away from the Pole complete with galvanized 19 mm dia x 1.80. M. long Stray clamps, stay insulator 19 mm x 600 double screw tightener, 7/4.00 mm G. I. stray wire etc. in 1:3:6; cement concrete complete . |
| 104 | Painting of the electric pole with 2 coats of aluminium paint over red primncer complete in all respect. |
| 105 | Earthing of pole by MS earthing rod of 20x2500mm and 6 SWG earthing wire etc complete. |
| 106 | S/F of 100 mm dia GIPipe Class B Make Jindal Complete with required clamping . (This item also include the Deduction of Cable Rate during erection in Pipe/Duct ( Duct will be made by civil work Estimate) |
| 107 | S/F of Dead End Insulated Clamps complete on Poles as direction of E/I. |
| 108 | S/E of Suspension Insulated Clamps complete on Poles as direction of E/I. |
| 109 | Removal and Re fixing of service Connections complete as per direction of E/I. |
| 110 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G. I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 111 | S/Earthing with G. I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. Rate SOR-18 |
| 112 | Supply & Erraceton of factory fabricated & wired metal clad dust and wermin proof floor mounting. M.SChannel Base with bottom and top cable entreis Incoming, 100 Amp MCCB-1No. Outgoing 63 AMP MCCB-2Nos Electrical control panel with TPN MCCB"s ) Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamberetc. complete in all respects The instrument chambdr shall be separate and shall comprisee of flush type digital metering system for phase to phase voltabe and single phase voltage, current and other parameters ) KVA, P.F,KW etc) in each phase with toubh type selector switches for difernet readings. instrument fuses, curnet transformer etcf. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS 8623 or above istuated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall besuitable for extension on the sides.The MCCB"ss shall be completewith suitable calbe end boxes, compression glands and indicating lamp on on incoming etc. The job includesthe grourting of the board as per directions of Enginer-in charge. |
| 113 | S/F of followign capacity of Automatic street light cubicle control Panel painted with anti corrosive alkeli and acie proof paint considting of tme switch TSO 100 serive/Digital type with Contactors, HRC fuses, 100 Amp MCCB isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complte in all respect . |
| 114 | Supply and layign of aluminium coductor PVC insulatedarmoure d eerved sheathed 25 Sq mm 3.5 core cable 1100 Volts grade at adepth of 750 mm below ground level over a cushion of 75 mm. thicks snad all around and protected with burnt, bricks on sides and on top. On surface th cable run shall be fixedon M.S. clamps et5c. of suitable sie or as directed by the Engineer-Incharge, complete in all respect. the armouring ofthe cable shall be properly connected with the earth conductor by clamps etc. |
| 115 | Same as Above but 16 sq. mm 4 core |
| 116 | Same as Above but 10 Sq. mm 2 core |
| 117 | S/Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. Rate SOR-18 |
| 118 | Earthing of pole by MS earthing rod of 20x2500mm and 6 SWG earthing wire etc complete. |
| 119 | S/F of 25 Sqmm Lugs complete with proper connections. |
| 120 | S/F of 16 Sqmm Lugs complete with proper connections. |
| 121 | S/F of 10 Sqmm Lugs complete with proper connections. |
| 122 | Supply & fixing ornamental 60W LED Post top light made of die cast aluminium IP65 CRI >70 with SPD and efficacy more than 90 lumens per watt including all standard specifications with 5 mtr Pole of approved make (top dia 114mm, Bottom dia 140 mm and base plate 10mm thick) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect as per drawing. |
| 123 | Supply & fixing ornamental 60W LED Post top light made of die cast aluminium IP65 CRI >70 with SPD and efficacy more than 90 lumens per watt including all standard specifications with 3 mtr Pole of approved make (top dia 114mm, Bottom dia 140 mm and base plate 10mm thick) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect as per drawing. |
| 124 | Supplying and drawing 3 x 1.5 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ PVC conduit as required. |
| 125 | Supply & laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,bend ,couplers etc. conforming to Is14930,part II complete with fitting and cutting ,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc.complete as required. |
| 126 | Same as above 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 127 | Same as above 160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 128 | S/P of Reflecting Red colour 75 mm wide strip 3 m aroudn the pole above 1.5 Mt from GLLogo ofPDA Complete in all respect as per direction E/I. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
