Ministry Of Road Transport And Highways has published Tender For Improvement Of Road Safety Through Providing, Fitting , Fixing Of Road Sinages Such As Retro Reflectorised Cautionary ,Mandatory And Informatory Signs,Rpm,Crash Barrier And Solar Street Light From Km 81.00 To Km 90.600 Of Nh-157 For The Ye. Submission Date for this Tender is 07-06-2023. Road Work Tenders in phulbani Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.(i)Triangular Sinages |
| 2 | 60 cm circular |
| 3 | 50 cm x 60 cm Chevron Board |
| 4 | Retro-Reflectorised Tape(10x10cm) |
| 5 | Supplying , fitting and fixing of raised pavement marker (RPM) on road surface with epoxy including cost of all materials, all labour, all T&P etc complete in all respect as per the direction of the Engineer-in-charge |
| 6 | Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/ road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS: 1367 and IS: 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5mm, 330mm long complete as per clause 810. |
| 7 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 8 | Plain/Reinforced Cement Concrete of Grade M-20 in Open Foundation complete as per Drawing and Technical Specifications. |
| 9 | Sand Filling in Foundation Trenches as per Drawing & Technical Specification |
| 10 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 11 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. |
| 12 | Supply of elegant look 60W AIO Solar Street lights having 180Wp Highly efficient Monocrystalline PV Module for faster charging of battery in adverse weather condition & 12.8 Volt 78 Ah LIFePo4 Battery (Lithium ferro Phosphate) Battery (BIS Approved) which will be kept inside the luminaire house(Theft retardant type),MPPT charge controller & PIR sensor to provide 2 days(24 Hrs) back up in dimming condition. The initial lumen output of AIO street light shall be ofless thanequal to 10000 lumens as per LM 79 report of third party NABL lab.only in white colour i.e CCT 6000K (+/-500K).The LED Chip will be of OSRAM/NISCHITA/CREE only. The complete system & BMS has been designed in such a way to provide to 2 days (24 Hrs) back up with dimming mode by activating PIR sensor & battery is completely theft retardant and maintenance free. The Luminaire is having IP 65 protection for critical component like ( LED compartment,Driver Compartment & Battery) and is as per IP test report of third party NABL Lab. only.The AIO Street Light is having IK 07( As per the test report of third party NABL lab.) The warranty on the complete AIO Street will be 5 years. The Scope of supply will beAIO solar Street lights with octagonal pole 9m tr hot dip galvanisedmanufacture from HT Steel having botton dia of 175mm top dier of 70mm and sheet thickness of 3mm or more complete with base plate and 4 nosof foundation bolts with stands 180 Km/ Per HR wind speed by considering the weight and dimension of AIO solar lights to be fitted on the top of the pole. The Pole and lights to be installed after making necessary RCC foundation as per the direction of the Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
