Public Works Department-PWD has published Tender For Repair Maintenance Of Electrical And Mechanical Works At 100 Bedded Lbs Hospital, Khichripur, Delhi. Sub Head Supply Installation Testing Commissioning Of Feeder Pillar To Energize The Outdoor Ductable Ac Units. Submission Date for this Tender is 07-06-2023. Electromechanical Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Fabrication, supplying, installation, testing & commissioning of Outdoor type compartmentalized Feeder Pillar made out of 2mm thick CRCA sheet having separate cable and bus bar alley,with locking arrangement asof Size 1500mmx1700mm and depth not less than 500 mm with 630 A capacity TPN aluminium bus bar of full length complete with solid connections and interconnections insulated aluminium conductor strips of appropriate size and terminal blocks (on outgoing), including powder coating of Outdoor panel, labeling, including voltmeter and indicating lights earthing etc. complete as required. (But without MCCB/MCB) |
| 2 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a) 12 way (4 + 36), Double door |
| 3 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 4 | a)250 A, 35 KA,TPMCCB. Icu=100% Ics |
| 5 | b)400 A, 35 KA,TPMCCB. Icu=100% Ics |
| 6 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Triple pole |
| 7 | Supplying and fixing MS Angle Iron frame of size1.50 mtr X 0.50 mtr and 0.50 mtr long 04 numberlegs made out from 40 mm X 40 mm X 6 mm angle complete with welding, painting after one coat of red oxide and grouting in floor/foundation etc. as required. |
| 8 | Supplying, Laying and fixing of Al. aromourd, PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on following way, including connection, testingand commissioningetc as required at site. |
| 9 | 4X25 Sq. mm on wall surface. |
| 10 | 3½ X 185 sq. mm on wall surface. |
| 11 | 3½ X 400 sq. mm in ground including excavation, sand cushioning, protective covering andrefilling the trench etc. |
| 12 | 3½ X 400 sq. mm in the existing RCC/ HUME/ METAL pipe |
| 13 | 3½ X 400 sq. mm in the existing masonry open duct |
| 14 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. |
| 15 | a) 4 X 25 sq. mm (28mm) |
| 16 | b) 3½ X 185 sq. mm (57mm) |
| 17 | c) 3½ X 400 sq. mm (82mm) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
