Power Government Departments Closing in 0 days TDR #37940147

Tender For Replacement/ Augmentation Of Old/Frayed Condcutor Of 11 Kv, Replacement Of Old/Frayed Lt Conductor (Lt Bare To Lt Bare And Lt Bare To Lt Ab Cable) And Capacitor Banks Under Revamped Reforms-Based And Results-Linked, Distribution Sector Sch

Issued by Government Departments · namchi, Sikkim
Tender Value
24.97 Crore
Estimated cost
Bid Submission
05 Jun 2023
0 days left
EMD
62.42 Lakhs
Bank guarantee accepted
Document Fee
2 Lakhs
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
namchi → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Replacement / Augmentation Of Old / Frayed Condcutor Of 11 Kv, Replacement Of Old / Frayed Lt Conductor ( Lt Bare To Lt Bare And Lt Bare To Lt Ab Cable ) And Capacitor Banks Under Revamped Reforms-Based And Results-Linked, Distribution Sector Scheme

BOQ

Name of Work: REPLACEMENT/ AUGMENTATION OF OLD/FRAYED CONDCUTOR OF 11 KV, REPLACEMENT OF OLD/FRAYED LT CONDUCTOR (LT BARE TO LT BARE AND LT BARE TO LT AB CABLE) AND CAPACITOR BANKS UNDER REVAMPED REFORMS-BASED AND RESULTS-LINKED, DISTRIBUTION SECTOR SCHEME
Sl. No. Item Description
111 KV Feeder Replacement with DOG Conductor
211.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for ACSR DOG Conductor including all nuts & bolts complete without arms.
311 kV Disc Insulator 70 KN, B&S / TC Type
4Hardware Fittings for disc insulator suitable for DOG conductor
511 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent )
6DOG Conductor 100 sqm, 6/4.72+7/1.57
7G.I. Wire 4 mm (8-SWG) for Continuous Earth
8PG Clamp for Dog Conductor
9Compression Joint for ACSR Dog conductor
10Back clamps of 75x8mm M.S. flat for holdingchannel.
11M.S. nuts & bolts of 16mm dia.X 40mm length.
12M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
13Pole top channel 75X40X 6mmX0.3m long S.P. structure.
14Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
15Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
16Red oxide paint @ 2 ltr/ pole
17Aluminium paint @ 1.5 ltr / pole
18G.I. Barbed Wire
1911 kV Caution Board
20G.I. Wire 4 mm (8-SWG) for Continuous Earth
2111 KV Feeder Replacement with RABBIT Conductor
2211.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for ACSR Rabbit Conductor including all nuts & bolts complete without arms.
2311 kV Disc Insulator 70 KN, B&S / TC Type
24Hardware Fittings for disc insulator suitable forRabbit conductor
2511 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent )
26Rabbit Conductor 50 sqm
27G.I. Wire 4 mm (8-SWG) for Continuous Earth
28PG Clamp for Rabbit Conductor
29Compression Joint for ACSR Rabbit conductor
30Back clamps of 75x8mm M.S. flat for holdingchannel.
31M.S. nuts & bolts of 16mm dia.X 40mm length.
32M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
33Pole top channel 75X40X 6mmX0.3m long S.P. structure.
34Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
35Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
36Red oxide paint @ 2 ltr/ pole
37Aluminium paint @ 1.5 ltr / pole
38G.I. Barbed Wire
3911 kV Caution Board
40G.I. Wire 4 mm (8-SWG) for Continuous Earth
41LT BARE TO LT ABC(3X95+1X50+1X16)SQMM
428.5 Mtr STP complete with nuts & bolts-410 SP21
43Tension Clamp for Dead End for L.T A B Cable
44Suspension Clamp for L.T A B Cable
45Tension Clamp for Dead End with Attachment
46Clamps for Neutral
47Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
48Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
49LTAir Bunched Cable 3 x 95 Sqmm + 1 x 50 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
50Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
51Back Clamps 75 x 8 mm flat
52Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
53Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
54Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
55Red Oxide Paint
56Aluminium Paint
57Anti Climbing Device (Barbed Wire)
58440 Volt Caution Board
59LT BARE TO LT ABC(3X70+1X50+1X16)SQMM
608.5 Mtr STP complete with nuts & bolts-410 SP21
61Tension Clamp for Dead End for L.T A B Cable
62Suspension Clamp for L.T A B Cable
63Tension Clamp for Dead End with Attachment
64Clamps for Neutral
65Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
66Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
67LTAir Bunched Cable 3 x 70 Sqmm + 1 x 50 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
68Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
69Back Clamps 75 x 8 mm flat
70Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
71Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
72Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
73Red Oxide Paint
74Aluminium Paint
75Anti Climbing Device (Barbed Wire)
76440 Volt Caution Board
77LT BARE TO LT ABC(3X50+1X35+1X16)SQMM
788.5 Mtr STP complete with nuts & bolts-410 SP21
79Tension Clamp for Dead End for L.T A B Cable
80Suspension Clamp for L.T A B Cable
81Tension Clamp for Dead End with Attachment
82Clamps for Neutral
83Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
84Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
85LTAir Bunched Cable 3 x 50 Sqmm + 1 x 35 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
86Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
87Back Clamps 75 x 8 mm flat
88Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
89Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
90Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
91Red Oxide Paint
92Aluminium Paint
93Anti Climbing Device (Barbed Wire)
94440 Volt Caution Board
95CAPACITOR BANK
9612.65 kV, 2000 KVAr, 3-Phase, 50 Hz, Outdoor Type, Capacitor bank havingstep as 900 Kvar + 900 Kvar + 200 Kvarat 12.65 KV. Bank shall be complete with Capacitor control panel of 100/200/400 kVAr at7.3 KV, including Capacitors, Reactors, Vacuum Capacitor Switches allied material such as suitable size of Aluminium busbars, Pin/Post insulators, Expulsion fuses, 3-Phase Oil-Cooled RVT,L.A,Isolator & Structure for complete Equipment etc.

AI Tender Summary

OUR REF NO 37940147
AUTHORITY Government Departments
TENDER VALUE 24.97 Crore
LAST DATE 05-06-2023
Authority
Authority Name Energy and Power Department
Work Description Replacement / Augmentation Of Old / Frayed Condcutor Of 11 Kv, Replacement Of Old / Frayed Lt Conductor ( Lt Bare To Lt Bare And Lt Bare To Lt Ab Cable ) And Capacitor Banks Under Revamped Reforms-Based And Results-Linked, Distribution Sector Scheme
Basic Detail
Tender No 86/RDSS/WORK/POWER/GOS/ACE-II
Bidding Type Tender
Location
City namchi
State Sikkim
Key Dates
Publish Date 31 May 2023
Submission Date 05 Jun 2023
Open Date 06 Jun 2023
Finance
Tender Value 24.97 Crore
Tender Fee 2 Lakhs
EMD 62.42 Lakhs
Exemption Not Available
Document List
3f50a60f-0765-4fd9-9a45-a30acc59f271.html
BOQ_726.xls
Package-IV.rar
PKG86.pdf
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 31, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 05, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 06, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

3f50a60f-0765-4fd9-9a45-a30acc59f271.html

xls

BOQ_726.xls

rar

Package-IV.rar

pdf

PKG86.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders