Tender For Construction Of Icds Building At Pasumali Gopalipuram In Ward No :93
Tender Value
9.69 Lakhs
Estimated cost
Bid Submission
05 Jun 2023
0 days left
EMD
9690
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Icds Building At Pasumali Gopalipuram In Ward No :93
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiffclay, stiffblack cotton, hard red earth, shales murram, gravel, stone year than dearth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loam or dinary soil and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering and baling outwater and cleaning and levelling the site etc.,complete10cum |
| 2 | Supplying and filling in foundation and basement with quary dustin layers of not more than 15cm thick well rammed and consolidated including watering complying with standard specification etc.complete. |
| 3 | Plain Cement Concrete 1:4:8 (one cement four sand and eight aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, lating and labour charges and all incidental charges such as water providing etc., complete as per standard specification. |
| 4 | Supplying and filling in foundation and basement with Well Gravel layers of not more than 15cm thick well rammed and consolidated including watering complying with standard specification etc.complete. |
| 5 | Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar,RCC Slab with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor).The payment for centering shall be given after the concrete is laid. (Vertical Portion Only) using steel plates10m2. |
| 6 | Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc..,complete(Rcc coloumn footing plinth beam and lintel sides) |
| 7 | Centering for soffits of RCCslabs of plane surface like lintels, beams,etc.,including strutting 3m high using mildsteel sheets ofsize 90cmX60cm XandB .G10 stiffened with M.Sangles of size25mmX25mmX3mm laid over silver Oak (C.W)joists ofsize 10cmX6.5cm (space databout 90cmc/c)and supported dycasurina props of 10cm to 13cmdia (spaced of 75cmC/C)complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 8 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherevernecessary as directed by departmental officer etc., complete. For basement |
| 9 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherevernecessary as directed by departmental officer etc., complete. For basement For Ground floor |
| 10 | Suppling and fabricating and placing in position MS(or)R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 11 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT Foundation and Basement |
| 12 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT Ground Floor Super Structure |
| 13 | Plastering with cement mortar (1:5) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete asper standard specifications (S.I.306) |
| 14 | Plastering with cement mortar 1:3, 20mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 15 | White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333 |
| 16 | Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. |
| 17 | Painting with ready mixed enamel paint over the new iron works of approved quality and colour with priming coat including the cost all materials etc., complete in allfloors. |
| 18 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement Colour |
| 19 | Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement, two sand) over 10mm base layer plastering and pointing with white cement neatly as directed. |
| 20 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.…(Fully panelled Double leaf - Door) |
| 21 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.…Fully panelled Double leaf - Window(without Ventilator) |
| 22 | Supply and fixing of PVC Solid Doors using 19 gauge 19mm MS Sq, tubes for styles and frames, 15mm MS Sq. tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panellings hall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc,complete as per standard specification. |
| 23 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.…(Ventilator) |
| 24 | Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2\" x 1-1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meterto fuse units by 19/16 PVC insulated copper wire with earth connection complete |
| 25 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) |
| 26 | Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set |
| 27 | Supply and fixing of single box type (Philips/Havells/Eq) suitable for 4feet 20W LED Tublelight with TW round blocks on wall or ceiling With 20W LED Tubelight with PVCunsheated Copper leads for terminal to the fitting. |
| 28 | Weathering Course with Concrete Broken Brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.-1 m 3 M |
| 29 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete |
| 30 | Supplying and fixing in position Indian water closet of size 580X440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556-Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes / PVC pipes by dismandling brick masonry, reinforced cement concrete roof / floor slab and making good the disturbed portion to original condition with out leakage etc., complete complying with standard specification sand as directed by the departmental officers. |
| 31 | Providing RainWater Harvesting arrangements in corporationbuilding by inserting of 150mm PVC slotted casingpipe ,including earthwork excavation for 900mm precostcementRing 5nos filling with One,three,Fifth Rings are 40mm metal and Two and Fourth Rings are Sand providing necessary pipe line arrangements eith std specification etc, complete |
| 32 | Writing Name board and Art painting work in ICDs room inner wall sides the rate shall be include the cost of artist, paint scaffolding and all labour charges etc.complete.., |
| 33 | GST18% |
AI Tender Summary
Tender Timeline
May 31, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 05, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender