|
| 1 | Dismantling Reinforced cement concrete surface and removal of debris, unloading, conveyance charges for 1kmclearing and levelling the site, etc., complete complying with standard specification. |
| 2 | Dismantling,clearing away and carefully stacking materials usefull and re-use for 3m hight removal of debris, unloading, conveyance charges for 1kmclearing and levelling the site, etc., complete complying with standard specification. |
| 3 | Dismantling Plain cement concrete surface and removal of debris, unloading, conveyance charges for 1kmclearing and levelling the site, etc., complete complying with standard specification. |
| 4 | Dismantling Plain cerami tiles surface and removal of debris, unloading, conveyance charges for 1kmclearing and levelling the site, etc., complete complying with standard specification. |
| 5 | Dismantling and Removal of Pressed tiles and Weathering coursesurface and removal of debris, unloading, conveyance charges for 1kmclearing and levelling the site, etc., complete complying with standard specification. |
| 6 | Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 7 | Earth work excavation for foundation in all soils and sub-soils and to full depth except in rock with intial lead of 10m and lift of 2m in black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small sizebouldersinclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers and clearing and levelling the site, etc., complete complying with standard specification.(SS20B) 50&61 |
| 8 | Supplying and filling with clean river sand in layers of not more than 15cm thick well rammed watered and compacted including cost and conveyance of sand and filling charges etc complete as per SS 7 & 24 – V, VI ( S4) 8 |
| 9 | Plain cement concrete of mix 1 : 4 : 8 ( one cement , four sand and eight aggregates ) using 40 mm ISS HBG metal for foundation and flooring, including , dewatering, if found necessary, and laid in layers of not more than 15 cm thick, well rammed and consolidated, including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc. completed as per standard specification and as directed by departmental officials |
| 10 | Brick Work in Cement Mortar 1:5 Mix using Country Bricks of size 8 ¾x 4 ¼x 2 ¾including cost of bricks and conveyance charges and including all labour charges and all other incidental charges etc. completed as per standard specification. |
| 11 | Plastering with cement mortar 1 : 3 Mix ( One cement and Three sand ) 20 mm thick including cost and conveyance of all materials , finishing, curing and all labour charges etc. complete as per standard specification. |
| 12 | Plastering with cement mortar 1: 5 mix ( one cement and five sand ) 12 mm thick including cost and conveyance of all materials finishing curing and all labour charges etc. complete as per standard specification. |
| 13 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 14 | Manufacturing,Supplying and fixing in position of Iron Grill Gate Including cost of Iron and conveyance charges and labour for Cutting,Bending,Tying,welding placing in position etc complete including one coal of priming coat and labour charges etc. complete as directed by the departmental officers complying with standard specification. |
| 15 | Fabrication and Supply of Iron Sheet Window of size 1.20 m X 1.20 m using 1 ¼ x 1 ¼ x ¼ Iron Angle for WindowFrame and using 1x1x ¼ iron angle Window shutter frame for vertical, horizontal members and strengthened by stiffeners using 16Gauge G.I sheet and Providing 10mm Square rod 0.10m interval in Horizontal wise including welded with 6nos of hold fasts, 2nos of Tower bolts, 2 Nos. of Handle & 3 inches with One coat of best quality Red oxide primer including cost and conveyance of all material and all labour charges and all other incidental charges etc. completed as per standard specification. |
| 16 | Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers |
| 17 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works.20mm UPVC Pipe |
| 18 | 25mmU PVC Pipe |
| 19 | Supplying and fixing in position15mm.diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac , thread etc.complying with standard specifications and including cutting and threading wherever necessary (Taps should be gotapproved by the executive Engineer before use on thework.(per Ino.) |
| 20 | Supply and delivery and fixing of 500 liters Capacity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 21 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 22 | White washing two coat freshly burnt shell time white in colour in all floors.Fevicol type gum or glue and adequate quantity of approved blue powder should be added in the preparation of white wash.The rte shall be inclusive of lime and other materials, brushes, scaffolding charges, etc., complete complying with standard specifications. |
| 23 | Painting Two Coats for with approved Exterior Plastic Emulsion paint first quality over plaster surface ceiling and other new surface and cleaning preparing the surface and curingone coat of Priming Coat including cost of Paint cleaning the surface etc. completed as per standard specification |
| 24 | Painting Two Coats for New Iron Work using Best Quality Synthetic Enamel Paint of Approved Color and Quality over one coat of Priming Coat including cost of Paint cleaning the surface etc. completed as per standard specification |
| 25 | Wiring with 2 x 1.5 sqmm(22/03)PVC Insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC Rigid Pipe on Wall and Ceiling with PVC accessories and with T.W. Switch Box in flush with wall covered with phylum sheet 3mm thick with Painting ofsuitable Colour for open PVC Light Point.(SD18) |
| 26 | Wiring with 2 x 1.50Sqmm (22/03)PVC Insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC Rigid Pipe on Wall and Ceiling with PVC accessories in flush wall with 150mm x 100mm 113mm T.W. Switch Box covered with hylum sheet 3mm thickfor 5A 3 Pin non inter locking CS Plug with Painting ofsuitable Colour with continuous Earth Wire connection of 14 SWG TC Wire for open PVC Plug Point.(SD37) |
| 27 | Supply and fixing of 1200 mm (48”) sweep AC ceiling fan Complete with regulator, copper condenserwith 1 m down fan clamp with side plates with ISI mark etc complete.(SD106) |
| 28 | Supply and fixing of single box type 110 V TUBE LIGHT flu fitting completewith TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.. etc complete. |
| 29 | Supply and delivery of 1HP monoblock motors including materials and labour charges etc.complete. |
| 30 | For GST 18% |
