|
| 1 | Supply of Machinery Spares |
| 2 | C.S. trash plate machined confirming to IS-1030 Grade 23/45. Free from blow holes .as per Drg. |
| 3 | Grooving as per drg.(Rate should be quoted lum sum)( Mill No. 1 ) |
| 4 | Drilling as per drg.(Rate should be quoted lum sum)( Mill No. 1 ) |
| 5 | Grooving as per drg. No(Mill No. 2 )(Rate should be quoted lum sum) |
| 6 | Drilling as per drg. (Mill No. 2 )(Rate should be quoted lum sum) |
| 7 | Grooving as per drg. (Mill No. 3&4)(Rate should be quoted lum sum) |
| 8 | Drilling as per drg.(Mill No. 3&4)(Rate should be quoted lum sum) |
| 9 | C.S. coupling’s per Drg. BCSM/MH/08/02(Rate should be quoted lum sum) (Mill No. 3&4) |
| 10 | C.S. Scraper with machining as per drawing 1020-MH-0402-01-256-R1 ( Mill No. 1 ) |
| 11 | Grooving of top scraperas per drg ( Mill No. 1 )(Rate should be quoted lum sum) |
| 12 | Grooving of discharge scraperas per drg.( Mill No. 1 )(Rate should be quoted lum sum) |
| 13 | Drilling as per drg.( Mill No. 1 )(Rate should be quoted lum sum) |
| 14 | M.S. Scraper with machining as per drawing MH-TS-02-R1 (Mill No. 2 ) |
| 15 | Grooving of top scraperas per drg. (Mill No. 2)(Rate should be quoted lum sum) |
| 16 | Drilling as per drg. (Mill No. 2) (Rate should be quoted lum sum) |
| 17 | M.S. Scraper with machining as per drawing MH-DS-02-R1(Rate should be quoted lum sum) (Mill No. 2) |
| 18 | Grooving of discharge scraperas per drg.(Rate should be quoted lum sum)( Mill No. 2) |
| 19 | Drilling as per drg. (Mill No. 2) (Rate should be quoted lum sum) |
| 20 | M.S. Scraper with machining as per drawing(Mill No. 3& 4) |
| 21 | Drilling as per drg.(Mill No. 3& 4)(Rate should be quoted lum sum) |
| 22 | Grooving of top scraperas per drg. (Mill No. 3& 4)(Rate should be quoted lum sum) |
| 23 | M.S. Scraper with machining as per drawing(Rate should be quoted lum sum) (Mill No. 3& 4) |
| 24 | Grooving of discharge scraperas per drg.(Rate should be quoted lum sum)(Mill No. 3& 4) |
| 25 | Drilling as per drg. (Mill No. 3& 4)(Rate should be quoted lum sum) |
| 26 | Mill No.2 & 3 |
| 27 | M.S. Scraper with machining as per drawing(pressure shoot) (Mill No. 2 & 3) |
| 28 | Grooving of top scraperas per drg.(Rate should be quoted lum sum) (Mill No. 2 & 3) |
| 29 | Grooving of bottomscraperas per drg.(Rate should be quoted lum sum) (Mill No. 2 & 3) |
| 30 | Drilling as per drg. (Mill No. 2 & 3)(Rate should be quoted lum sum) |
| 31 | M.S. Scraper with machining as per drawing( pressure shoot) (Mill No.4) |
| 32 | Grooving of top scraperas per drg.(Rate should be quoted lum sum) (Mill No.4) |
| 33 | Grooving of bottomscraperas per drg.(Rate should be quoted lum sum) (Mill No.4) |
| 34 | Drilling as per drg. (Mill No.4)(Rate should be quoted lum sum) |
| 35 | C.S crown pinion confirming to IS-1030 Grade 23/45 Free from blow holes and proof machine as per Drg. For Mill no.1(Rate should be quoted lum sum) |
| 36 | C.S crown pinion confirming to IS-1030 Grade 23/45 Free from blow holes and proof machine as per Drg. No. MH-01-09-07 For Mill no.2,3&4 (Rate should be quoted lum sum) |
| 37 | C.S tail bar as per Drg.(Rate should be quoted lum sum) |
| 38 | Cane UnloaderBridge wheel as per drg. (Rate should be quoted lum sum) |
| 39 | Cane unloader trolly wheel as per drg.(Rate should be quoted lum sum) |
| 40 | Cane cutting knives |
| 41 | Cane cutting knives made from shock resistance MSplate 25 mm thick confirming to IS-2062. and tested at Hardness-500 BHN Tensile-65 kg/mmYield Strength-50 kgf/mm Elongation-20 % Min With proper heat treatment to avoid breaking the knives. As per drawing no. 1020-MH-0303-1700-105Without hard facingWith hard facing |
| 42 | Cane cutting knives made from shock resistance MSplate 25 mm thick confirming to IS-2062. and tested at Hardness-500 BHN Tensile-65 kg/mmYield Strength-50 kgf/mm Elongation-20 % MInWith proper heat treatment to avoid breaking the knives. As per drawing no. 1020-MH-0303-1-105Without hard facingWith hard facing |
| 43 | Cane cutting knives for cane levelleras per drg. MH-0303-R2 with domite tip Length-465mm,thickness-25mm make- Zuper/polyshield/Hyster/Imco |
| 44 | Cane cutting knives for cane choppeeras per drg. MH-0303-R2 with domite tipLength-465mm,thickness-25mm make- Zuper/polyshield/Hyster/Imco |
| 45 | Fibrizer hammer & spares |
| 46 | Fibrizer Hammer As per drg no. 1030-310-1700-112 |
| 47 | Fibrizer Hammer Domite TipMakeZuper/polyshield/HysterAs per drg no. 1030-310-1700-112NOTE- Party shouldrecommend how much cane will be crushed by using both sides of domite tips. |
| 48 | VFD for cane unloader |
| 49 | Supply and fixing of crane duty VFD for bridge wheels dia 400 mm motion of cane unloader 05ton capacity |
| 50 | sugar hopper tray complete with deck piece |
| 51 | Sugar hopper tray complete with deck piece thickness of plate 5mm deck plate with riveted fitting arrangement of wooden connecting rod with wooden strip klits lead 5 mm thickwidth 5 ft. Heigh 10-12 inch Length 12 mtr. |
| 52 | Pneumatic plough discharger for G-1250 batch type fully automatic CF machine |
| 53 | Supply of pneumatic plough discharger suitable for uttam make G-1250 batch type fully automatic CF machine Make Energy TechScope of supply-1.Plough assembly- 1 no.2.Plough in/out cylinder- 1no.3. SS scraper blade with air knife and brass tip- 1 no.4. Globe valve , control valve , air filter for air knife along with pneumatic, fittings and hose etc.5.Base plate suitable for plough.6.Arrangement for fixing bottom valve cylinder and lever as perplough assembly |
