|
| 1 | Electrical Works. |
| 2 | Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting M.S Channel base with bottom and top cable entreis Electrical control panel with TPN MCCB\"s (Four pole 36 KA with thermal magnatic release) switch completeinstrument chamber etc. complete in all respect.The instrument chamber shall be separate and shall comprise of flush type/digital metering system for phase to phase voltage and single phase voltage ,current and other parameters(KVA,P.F & KW etc.) in each phase with touch type selector switches for different reading ,instrument fuse,current transformer etc.The panel board shall have suitable capacity electrolytic aluminium bus bar as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC support with deteachable side cover and shall be suitable for extension on the sides. The MCCB\"s shall be complete with suitable cable end boxes,compression glands and indicating lamp on incoming etc.The Job includes the grouting of the panel as per direction of Engineer in charge. All outgoing of 40Amp above will be provide ampere meter with ring type CT & selector switch etc. The switch board shall be fabricated with CRCA sheet with minimum thickness of 2mm and cubical type switch shall be CAT B type only. (Incoming 200 Amp MCCB-01 Nos./Outgoing 63Amp MCCB-03 Nos. or as per technical specification approved by Engineer incharge. |
| 3 | S & F surface/Flush mounting 6ways TPN distribution boardwith additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.CAT A |
| 4 | Supply & fixing 40Amp 4 Pole MCB on existing Distribution Boad/ Surface includuing cost of connection. CAT B |
| 5 | Supply & wiring of 16 Sq mm 2 core PVC Aluminum conductor sheathed cable 1100 Volt grade of approved make in existing HDPE/GI/DWC hume pipe/Surface including cost of material,labour and T&P but excluding cost of HDPE pipe. (Havells/Polycab/Grandlay) |
| 6 | Supply & wiring of 16 Sq mm 4 core PVC Aluminum conductor sheathed cable 1100 Volt grade of approved make in existing HDPE/GI/DWC hume pipe/Surface including cost of material,labour and T&P but excluding cost of HDPE pipe. (Havells/Polycab/Grandlay) |
| 7 | Painting of conduit pipe assorted size two coat, laid fortelephone (Green) of fire lighting (red) etc. by synthetic enamel paint including all material, labour, T&P etc. required for proper completion of the work. |
| 8 | Supply and fixing of 8 SWG GI wire along with steel conduit pipe duly bound with earth clops as directed by the Enginner in charge with supply of all material labour and T&P required for proper completion of work. |
| 9 | Supply and fixing 25 mm dia MS flexible pipe with PVC coating along with allancillaries and accessories like coupler etc. as required. |
| 10 | Supply and laying & concealingof 25mm dia,2.0mm thick rigid/PVC steel conduit pipe with ISI marked embossed and with MS acessories confirming to IS No. 3419 like bends,couplers,staples and other acessories for drawing wires duly sealed at joints on surface including cost of all material labour and T&P. |
| 11 | Supply & wiring of 16 Sq mm 2 core PVC U/A Aluminum U/A conductor sheathed cable 1100 Volt grade of approved make in existing HDPE/GI/DWC hume pipe/Surface including cost of material,labour and T&P but excluding cost of HDPE pipe. (Havells/Polycab/Grandlay) |
| 12 | Supply & fixing mounting time switch of L&T/Siemens/C&S or equel brand including cost of connection, material, men and T&P. |
| 13 | Supply & fixing 3-Phase Power Contractor ML-3 type or equel (3 NC+2 NO) for Automatic Street & High Mast Control Panel in cluding cost of Connection, men and T&P. |
| 14 | Supply & fixing 6A SPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of time switch with contactors,MCB etc including cost of fixing clamp, men and T&P. |
| 15 | Supply & fixing sheet steel enclosure for SP/DP with neutral link and earth terminal.CAT B |
| 16 | Supply & fixing 6Amp to 32Amp SP MCB, 10KA on existing Distribution Boad/ Surface includuing cost of connection. CAT B |
| 17 | Supply & fixing70W LED street light fitting having die cast aluminium body and diffuser with driver set confirming to IP 66 protection complete in all respect. CAT-AA (Philips/Cromption/Bajaj/Havells make) |
| 18 | Supply & fixing 70W LED Flood light fitting having die cast aluminium body and diffuser with driver set confirming to IP 66 protection complete in all respect. CAT-AA (Philips/Cromption/Bajaj/Havells make) |
| 19 | Providing& fixing 1.00 mm thick with zinc coating not less than 275 gm/m² corrugated G.S. sheet roofing including vertical / curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I.limpet washers filled with white lead, including a coat of approvedsteel primer and two coats of approved paint on overlapping ofsheets complete (up to any pitch in horizontal/ vertical or curvedsurfaces), excluding the cost of purlins,rafters and trusses andincluding cutting to size and shape wherever required |
| 20 | Mild steel or iron work in heavy sizes such as built upgates record rack, roof work, gates etc. brought to required form including drilling holes revitting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc. and their fixing require for proper completion of the work. |
| 21 | Supplying and drawing 4x2.5 Sq.mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 22 | S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect. |
| 23 | Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. |
