Tender For Annual Rate Contract For Repair And Maintenance Work On Various Roads Under Jurisdiction Of Pwd District Sub Division I Nokha (Section I)
Tender Value
82.70 Lakhs
Estimated cost
Bid Submission
05 Jun 2023
0 days left
EMD
1.65 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nokha → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Rate Contract For Repair And Maintenance Work On Various Roads Under Jurisdiction Of Pwd District Sub Division I Nokha (Section I)
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201.By Mechanical Means.In area of non-thorny jungle |
| 2 | Construction of granular sub-base by providing well graded material, spreading in uniform layerson prepared surface, mixing by manual mean method at OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per MoRTH Specification Clause 401. With lead of material up to 20.00 km.from quarry .For Grading III Material |
| 3 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and MoRTH Specification Clause 801 |
| 4 | 600 mm equilateral triangle |
| 5 | 600 mm x 600 mm square |
| 6 | Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminium sheeting, 2 mm thickwith areanot exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801. Direction and Place Identification signs upto 0.9 sqm size board |
| 7 | Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRTH Specification Clause 801 |
| 8 | Ordinary Kilometer Stone (Precast) |
| 9 | 200 m stone (precast) |
| 10 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. |
| 11 | Providing and fixing PVC Bump Speed Breakers size 350 mm x 250 mm x 50 mm fitted with key hooks complete with labour material and traffic diversion arrangements. |
| 12 | Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.Ordinary soil. Upto 3 m depth |
| 13 | Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104.P.C.C grade M 10.Nominal mix 1:3:6 |
| 14 | Stone masonry in cement mortar for substructure complete as per drawing & MoRTH specification Clauses 1402, 1405 & 2200.Random Rubble masonry .In 1:4 cement mortar |
| 15 | Pointing with cement mortar (1:3) on Stone work as per drawing and MoRTH specification Clauses 1406 and 2200 |
| 16 | Plastering with cement mortar (1:4), 20 mm thick on Stone work. |
| 17 | Plain/reinforced cement concrete in substructure complete as per drawings and MoRTH specification Clauses 1700 and 2200.For height upto 5 m.P.C.C. grade M 20 .Nominal mix (1:2:4) |
| 18 | Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MoRTH specifications Clause 3002 |
| 19 | Maintenance of Slab type Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and MoRTH specification Clasue 201 & 2800 |
| 20 | Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as perdrawings and MoRTH specification Clause 800 & 3000. |
| 21 | Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Ordinary Kilometre Stone |
| 22 | White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per MoRTH specifications Clause 800. |
| 23 | Supplying, filling and stitching of empty cement bags either of plastic or jute with earth available at site, of weight not less than 40 Kg., including excavation etc. complete. |
| 24 | Removal of blown sand including taking out and disposal of excavated material with lead up to 50Mtr. and lift up to 1.5 Mtr disposed soil to be levelled and neatly . |
| 25 | Maintenance of Base Course by WBM/ WMM patchingroad including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404 . |
| 26 | Providing & laying 20 mm thick premix with seal coat type B patching with 0.27 Cum of stone chipping (0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size) mixed with 14.6 kg of suitable VG-Grade per 10 Sqm of road surfaceincluding heating of binder and aggregate mixing of aggregate and binder, cleaning the area of patch, pot holes cut to regular shape with vertical side, removing all loose & disintegrated material, application of tack coat Biitumen VG-10 @ 2.25 kg. per 10 Sqm., laying of patching material and compating with 8-10 tonne power road roller including cost of bitumen, aggregate fuel, lubrication, binder, hire charges of Machinery, T&P etc. |
| 27 | Construction of Foundation / Inaugration Pedastal in 23 cm thick Brick masonry in CM 1:4 of size 1.20m x 1.80m above ground level with adequate foundation including providing and fixing of Granite stone of size 0.75m x0.60m with engraving letters and figures,cement plaster,white washing etc. complete as per direction of Engineer in charge. |
| 28 | Conducting Traffic Census at Traffic Count Station including collection of data during census, tabulation and computerised information preparation arrangement of lighht, furniture for sitting of two persons, installation and maintenance of tent materials, banners sign boards etc. during census engagement of at least metric educated two persons per shift of eight hours etc. complete as directed by Engineer-in-charge for a period of seven days. |
AI Tender Summary
Tender Timeline
May 29, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 05, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 07, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender