Delhi University has published Tender For Providing And Laying Kota Stone Flooring, Repair Garage Misc. Plumbing Work /Sanitary Work In Servant Quarter And Repair Of Boundary Wall In Banglow No.24 Cavalry Lane, University Of Delhi. Submission Date for this Tender is 15-06-2023. Stone Flooring Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead:For thickness of tiles above 25 mm and up to 40 mm |
2 | Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. |
3 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
6 | Uprooting stay unwanted vegetation/peepal tree etc from wall and terrace upto floor level i/c repair of damaged plaster and making good the same as per existing finishing as directed by Engineer-in-charge. |
7 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall : 15 mm dia nominal bore |
8 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
9 | P/F cupboard shutter made of 19 mm thick commercial block board duro/ISI make or equivalent mounted with 1 mm sunmica (Mareno/sundec/centurymake) or equivalent on exterior face and painted inside with primer complete framed of shutter to be 3"1 1/2" second class teak wood with intermediate member as per requirement wooden frame to be polished with french spirit polish on outside & painted with all fittings e.g. catches, brass handles/ knobs etc as required. |
10 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m:All kinds of soil |
11 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
12 | Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand):Flush/ Ruled/ Struck or weathered pointing |
13 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :20 mm nominal bore |
14 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) |
15 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
16 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
17 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
18 | Providing andfixing ivory coloured vitreous china pedestal type water closet(European type W.Cpan) with Ivory coloured dual flushing cistern with manually controlled device ( handle lever), with all fittings and fictures complete including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked ivory coloured vitreous china solid soft close seat cover Royal with jet with pipe twin flush fitting Cera make/Hindware/Prayag or equivalent |
19 | Repairing the steel gate by welding provinding MS flat locking arrangement,hinges etc complete |
20 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete: Hot finished welded type tubes |
21 | P/F fiber sheet(4mm thick ) roofing wall putty copated J or L hooks nuts and bolts etc complete. |
22 | Repair of door windows i/c taking out,p/f hinges,towerbolts,handle and repair wherever required & refixing the same complete in all respectas per direction of Engineer-in-charge. |
23 | Repair work for attending seepage leakage problems in rain water pipe i/c making the same leak proof the seepage paint complete in all respect |
24 | French spirit polishing : 13.68.1 Two or more coats on new works including a coat of wood filler |
25 | Disposal of leafs, garbage,silt kooda(waste item)etc i/c loading and unloading charges out of the University campus |
26 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
27 | Repair ceiling plaster RCC surface i/c removing the loose concrete and applying water proofing treatment with Dr.fixit compound on the rough surface with ceiling plaster bottom layer 1:3 (1cement:3coarse sand) and top layer 1:3 (1cement:3fine sand) total thickness at the plaster 15 to 25 mm etc complete as per direction of Engineer-in-charge. |
28 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge:15 mm nominal dia |
29 | Providing and fixing commercial cupboard of depth 550 mm with shelves,side,top bottom & shutter with 19mm thick teak board (duro/centuary make) and laminated with 1 mm thick sunmica (Mareno make) from inner and outside i/c multipurpose lock (Godrej make ) fittings painting & and polishing beading etc all complete as per direction of Engineer-in-charge.(Measurement will be made of front portion) |
30 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
31 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominal bore |
32 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) :Second class teak wood:35 mm thick shutters |
33 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres |
34 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 9.7.1 Second class teak wood |
35 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.63.1 250x10 mm |
36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
37 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm |
38 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
39 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading |
40 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
41 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.20 mm nominal outer dia Pipes |
42 | Providing and fixing fency stainless steel pipe/curtain rods with brackets/side funnels of size upto 32 mm dia pipe (heavy type) with necessary screw etc all complete. |
43 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
44 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
45 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore |
46 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) |
47 | Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
48 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms: 15 mm nominal bore |
49 | Cleaning of PVC water storage tank and checking the water supply line and connections for giving proper supply of the water to the user |
50 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
51 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore |
52 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore |
53 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball:20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
54 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:32 mm dia |
55 | Providing and fixing godown lock approved quality with all complete |
56 | Providing and fixing commercial cupboard of depth 450 mm with shelves,side,top bottom & shutter with 19mm thick teak board (duro/centuary make) and laminated with 1 mm thick sunmica (Mareno make) from inner and outside i/c multipurpose lock (Godrej make ) fittings painting & and polishing beading etc all complete as per direction of Engineer-in-charge.(Measurement will be made of front portion) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail