Tender For Reconductoring Aac Using Lt Ab Cable At Nedumgolam Transformer Area (On Turnkey Basis), paravoor-Kerala

Tender For Reconductoring Aac Using Lt Ab Cable At Nedumgolam Transformer Area ( On Turnkey Basis ) --2 Aerial Bunched Cable LT 3x70 + 1x50 + 1x16 sq.mm (Insulated Messenger) 3 FUSE UNIT 415 V 100 A PORCELAIN 4 Crimping Socket Palm Type 70 Sq.mm -Al (Cable Lug) 5 Cable Tie UV Plastic Heavy Duty 250 mm Length 6 End Cap for ABC 16 Sq mm 7 Stainless Steel Buckle Slot width 20.5 mm x 1.5mm,Thickness 1.2 mm. 8 Anchoring /Dead end Clamp Assembly for LT AB Cables up to 70 sq.mm 9 End Cap for ABC 70 Sq mm 10 Stainless Steel Strap [20 mm x 0.7 mm] 11 Suspension Clamp Assembly for LT AB Cables up to 70 sq.mm 12 Pre-Insulated Midspan Joints and Terminal Lugs 70 Sq.mm 13 Pre-Insulated Midspan Joints and Terminal Lugs 16 Sq.mm 14 Stainless Steel Strap 20 mm x0.7 mm 15 Insulation Piercing Connector- Main: 16 sq mm to 95 sq mm; Tap : 16 sq mm to 95 sqmm 16 Insulation Piercing Connector- Main: 16 sq mm to 95 sq mm; Tap : 1.5 sq mm to 16 sq mm 17 Earthing set (spiral) 18 Satellite connector – Main : 16 sq mm to 95 sq mm; Tap :1.5 sq mm to 35 sq mm (4 way) 19 LABOURS 20 Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles 21 Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc. 22 Providing Cable Tie 23 Erection of Anchor clamp / dead end clamp suitable for LT AB cable with SS strap assembly@ 2 nos at each location 24 Providing End Caps 25 Erection of suspension clamp suitable for LT AB cable with SS strap assembly 26 Installation of Pre-insulated straight through joints for 70sqmm cable 27 Installation of Pre-insulated straight through joints for 16sqmm cable 28 Providing insulation piercing connectors 29 Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. 30 Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls. 31 Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls. 32 Erecting one LT PSC Pole in position incl. digging & back filling pit. 33 Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 34 Providing Strut using LT PSC pole incl. digging & back filling pit. 35 Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 36 Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite. 37 Providing Stay for LT poles incl. digging & back filling pit. 38 Renewal of existing damaged/broken old LT stay with existing stay rod. 39 Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling. 40 Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	17-06-2023	Recounductoring AAC Using LT AB Cable at Nedungolam Transformer Area on Turnkey Basis-Date Extended.	Date	24-06-2023
2	30-06-2023	Date extended-Recounductoring AAC Using LT AB Cable at Nedungolam Transformer Area on Turnkey Basis.	Date	10-07-2023

INR 5900 /-

INR 61100.0 /-

INR 24.41 Lakhs /-