Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-06-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-06-2023 |
| Sl. No. | Item Description |
| 1 | BOQ (ADDN/ALTN/IMPROVEMENT TO OFFICERS MESS AND INSTITUTE AND ROUTING OF TREATED WATER FROM STP FOR ARBORICULTURE AT AF STN SURATGARH) |
| 2 | Excavation in trenches in soft/loose soil, n exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n. exc 10 sqm on plan and n. exc 1.5m in depth and getting out complete all as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed. |
| 4 | Removing excavated soil exc 250m but not exc 500m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed. |
| 5 | Demolitionof stoneor brick masonry built in cement mortar including all quoins, arches etc.but excluding ashlar facing, dressed stone work etc, complete all as specified and directed. |
| 6 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in cm 1 : 6 completeall as specified and as directed by Engr-in-Charge. |
| 7 | All as per Srl item No. 5 here-in-before but except bricks. |
| 8 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified and directed. |
| 9 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed. |
| 10 | Taking downshutters of any description but exc 1 sqm and not exc 2 sqm each and refixing in same opening complete all as specified and directed. |
| 11 | S & F plain solid straight chowkhat & frame 2nd class hardwood framed, wrought, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 12 | S&F 35 mm thick 2nd class Hard woodPlain framed, panelled door shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 13 | S&F 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 14 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plaincolourPVCsheetreinforcedwithMS squaretube,supplied andfittedinopeningsasperspecificationanddrawingshownin SSR Part-II, complete all as specified and directed. |
| 15 | S&F 30 mm thick factory made moulded PVC door (Wood free) consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mmthick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel deign in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 nos.) thick PVC sheet to be given for lock provison at lock height complete as per manufacturer’s specification and drawing or direction of Engineer-in-charge. |
| 16 | S & F 125 mm Brass polished butt hinges type B12 complete all as specified and directed |
| 17 | S&Fbutthinges,mediumweight,coldrolled,mildsteel100mm long (ISI marked), complete all as specified. |
| 18 | S&F butt hinges, stainlees steel 100mm long(ISI marked), complete all as specified and directed |
| 19 | S & F 300 mm fancy type Brass handles, cast type, polished bright complete all as specified and directed |
| 20 | S & F 300 mm fancy typeBrass barrel tower bolts, with cast or sheet barreland rolled or cast bolts and fixed complete all as specified and directed |
| 21 | S & F 375 mm fancy type Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed |
| 22 | S & F brass mortice lock 100 mm 4 lever vertical type with duplicate key and handle set complete all as specified. |
| 23 | S&F Aluminum handles, 150 mm size plate type complete all as specified and directed. |
| 24 | S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified and directed. |
| 25 | S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, castorexcludedsectionsandfixingboltsandslidingboltsof excluded sections or cast aluminum alloy and fixed, complete all as specified and directed. |
| 26 | S & F door closer hydraulically regulated, design No 3 universal type suitable for door shutter of any width and of weight 61 to 80 Kg each cast iron body complete all as specified and directed. |
| 27 | S&F foraluminium anodised frame with one or more rebates including jointing cleat for fixing inclusive of rubber neoprene packing and glazing clips for fixing of glass/ board in aluminium frame all as per manufactures catalogue complete all as specified and directed. |
| 28 | S&F toughened glass fixed in aluminium frame fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, complete all as specified and directed. |
| 29 | Supply and fixing 5.5mm thick tint glass ordinary quality and glazing with oil putty or wooden beads exceeding 0.5 Sqm in window frame etc, complete all as specified and directed. |
| 30 | M & L 12 mm thick both sides prelaminated Particle board, medium density, fixed with screws to frame work in cup board shutters, partitions, shelves complete all as specified and directed. |
| 31 | S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as directed. |
| 32 | S&F Anodixed aluminium door shutter having150mm x 44mm x 2.85 mm thick bottom rail,150 mm x 44mm x 2.85mm thickmiddle rail, 100mm x44mm x3 mm thick stile and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm ,anodixed aluminium handle 200 mm long (02 Nos) , 3 Nos 100 mm size chromium plated butt hinges, 2 Nos 200mm size Alu tower bolt, 1x aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type), 1x double legged floor door stopper aluminum alloy body and tongue, 1 x Aluminium body hydraulically door closer , designation No-3, universal type, weight between 61 to 80 kg etc inlcuding frame of section 100 mm x 44 mm x3 mm and door shutter, top and bottom portion covered with and including5.5mm thick tint glass ordinary quality , onemortion lock (Make: Harrison ) with shutter and fixing complete all as specifies and directed. |
| 33 | S&F Aluminum window and ventilator shutters, sliding type with four track (two track with and including galvanised mild steel wire cloth 0.50 mm nominal dia of wire & average width of aperature 1.00 mm and fixed with tinned tacks or galvanised wire staples, two track with andincluding 4.8 mm thick tined glass including necessary fitting and fixture)without sash bars, aluminum sections of size 40x20x1.5 mm fixed in aluminum anodised double frame of section size 63X35X2 mm including necessary jointing cleats, glazing clips, aluminum anodised sap beading, screws, aluminium beading, pvc packing, aluminum anodised fitting and fixture including aluminium chequered grills as on aluminium windows weight not less than 1.0 kg/sqm complete all as specified and directed. |
| 34 | S & F framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars parallel iron doors and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 35 | S&F Stainless Steelwire cloth0.36mmnominaldiaofwire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. |
| 36 | S&Fstainlesssteel 25mmdia curtainrod includingstainless steel brackets and stainless steel end knobsfixedwith plugs & screws, complete all as specified and directed. |
| 37 | S&F in replacement of roller blinds of any size and any colour (non-blackout series) with aluminium headrail,with chain operation including taking down to unserviceable venetian blinds complete all as specified and directed. |
| 38 | Taking downcement plasteronbrickorconcrete wallsurfaces etcincludingraking out joints,hackingforkey,scrubbingdown withwateretc. complete all as specified and directed. |
| 39 | M&Lfor10mm thick rendering incementmortar 1:6 onfair faces of brick work or concrete surfaces finished even and smoothwithoutusingextracementas on wall completeall as specified and directed. |
| 40 | M&Lfor15mm thick rendering incementmortar 1:4on fair facesofbricksurfacesor concretesurfaces,surfacefinished even and fair without using extra cement completeallas specified and directed. |
| 41 | M&L for 5 mmthickrenderingin cement mortar1:3on concretesurfacesofroofprojectionceilingetcincluding repairingofbrokenportionupto6mheightandsurfacefinished evenandsmoothwithoutusingextracement,completeallas specified and directed. |
| 42 | M&Lforpreparationofnew plasteredorunplasteredsurfacesof wallandapplyingtwocoatsofoilemulsiondistemperover 2-3 mmthickJK/Birlawallcareputtyto achievesmoothfinishsurface,completeallas specifiedand directed. |
| 43 | M&L for complete removal of existing treatment from wall surfaces andapplyingtwocoatsofoilemulsiondistemperover 2-3mmthickJK/Birlawallcareputtyto achievesmoothfinishsurface,completeallas specifiedand directed. |
| 44 | M&Lforpreparationofnew plasteredorunplasteredsurfacesof ceiling andapplyingthreecoatsofwhitewash,completeallas specified and directed. |
| 45 | M&Lforpreparationofplasteredorunplasteredolddecoraced surfaces on ceiling including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white washon ceilingcomplete, allas specified and directed. |
| 46 | Applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, over new plastered surfaces , including preparation and using primer new surfaces ,complete all as specified and directed. |
| 47 | Applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , including preparation of oldsurfaces like brooming down or steel wire brushingscraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed. |
| 48 | M&L for scraping/preparation of new Wooden doors and filling putty or the required hardeners for prepration of any wooden marks , scratches or scars and treated with putty /primer to obtained similar texture and mallamine coating on the surface with approved shade and make (MRF, Berger, Asian) on the surface doors to obtain smooth and uniform looking as directed. |
| 49 | M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 50 | M&Lforpreparationofoldpaintedsurfaces,ofwoodandwood basedmaterialofanydescriptionover10cmwidthorgirthby cleaning, sand papering, brushing etc, filling in crevices and cracks etc with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 51 | M&L for prepration of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 52 | M&L for preparing old painted surfaces of steel and iron surfaces, over 10 cm in width or girth by cleaning, sand papering, brushing withwirebrushes,scrappingbysteelscrappersetc,fillingin crevices and cracks etc. with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 53 | Demolitionofcementconcreteingroundfloorsandpavingnot exceeding15cmthickness(beloworabovegroundlevel)un- reinforced, complete all as specified and directed. |
| 54 | M&L for PCC 1:4:8 type D-2(using 40mm graded stone aggregate)as in foundation , filling and mass concrete complete all as specified and directed. |
| 55 | M&L for 75mm thick cement concrete 1:3:6, type C1, using 20mm gradedcrushedstoneaggregateasinplinthprotection,laidin slope of 1:20 and surface finished even and smooth without using extracementincludingmakingjointat3mintervalandateach cornerthejointshallbefilledwithbitumenmasticfillingtofull depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed. |
| 56 | M&L for 75mm thick cement concrete 1:2:4, type B1, using 20mm gradedcrushedstoneaggregateasin floor finished, surface finished even and smooth without using extracement includingmakingjoint in blocks not more than 10 sqmandateach cornerthejointshallbefilledwithbitumenmasticfillingtofull depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed. |
| 57 | M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded aggregate as in sub floor , sub base; concrete surface finished even &rough to receive topping floor/tiles finish/layer complete all as specified and directed. |
| 58 | M&L for 75 mm thick PCC 1:4: 8 type D-2 using 40 mm graded stone aggregate as in sub base of floor/tiles etc complete all as specified and directed. |
| 59 | M & L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping including necessary form work complete all as specified and directed. |
| 60 | Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified and directed. |
| 61 | use and waste offormwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter surface fair finishedcomplete all as specified and as directed. |
| 62 | use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions surface fair finishedcomplete all as specified and as directed. |
| 63 | use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves, landing and similar work not exceeding 200mm thick (horizontal or sloping) and to edges of concrete surface fair finishedcomplete all as specified and as directed. |
| 64 | use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.surface fair finishedcomplete all as specified and as directed. |
| 65 | use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide surface fair finishedcomplete all as specified and as directed. |
| 66 | M&L for providing reinforcement cement concrete Design mix M25as inslabs supported on walls, beams and column in floors balconies,canopies, desc slabs and the shelves and the like complete all as specified and directed. |
| 67 | M&L for reinforcement cement concrete Design mix M25 as in chajjascomplete all as specified and directed. |
| 68 | M&L for providing reinforcement cement concrete M-25 as incolumns complete all as specified and directed. |
| 69 | M&L for providing reinforcement cement concrete M25 as in Lintel beam, Roof beam, landing balconies,canopies, desc slabs, cantilever and the shelves and the like complete all as specified and directed. |
| 70 | M&L for TMT mild steelbars 10 mmdiaandover,cut to length,bent toshaperequired,includingcranking,bending spirally for hoopingforcolumn,hooking end and binding with and including mild steel wire (annealed)notless than 0.9 mm dia or securing with clipscomplete all as specified and directed. |
| 71 | All as per item no 69 abovebut bars 6 mm to 8 mmdia complete all as specified and directed. |
| 72 | All as per item no 69 abovebut bars 6mm to 8mm dia as instirupps, spacers and binders complete all as specified |
| 73 | Dismantlingfloorhearthorwalltilingincludingcementmortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 74 | M&L for coloured glazed ceramic tiles of approved shade ofsize 450 x 300 mm x 7 to 8mm thick as in vertical surface etc set and jointedinneatcementslurryandpointedinwhiteorcoloured cement to match,laid over and including 10mm thick rendering in cement mortar 1:4,complete all as specified and directed. |
| 75 | M & L Vitrifiedceramic tiles 10mm thick (Square/rectangular ) polished, area of each tilesnot exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer all as specified and directed. |
| 76 | M&L foranti skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tilesexceeding 0.11 Sqm butn exc 0.18 Sqm,in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6,complete all as specified and directed. |
| 77 | Demolition of stone slabs/paver block and tiles of any description or thickness infloors,apronsetc.,laid,beddedandpointedinanymortar, complete all as specified and directed. |
| 78 | M&Lformachinecutpolishedkotastoneslabflooring18-20mm thicklaid andjointedwithgrey cement slurry mixed with pigment to match the shade of the slab,laid over andincluding20mmthick screedbedincement mortar1:6, rubbing,grindingandpolishingtoachievemirrorfinish,complete all as specified and directed. |
| 79 | M&L Granite 20 mm thick of any type work(table rubbed and polished) in steps, jambs,pillars windows cill cooking platform and likeincluding pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external,including demolition of stone slab and tiles of any description or thicknesscomplete all as specified and as directed. |
| 80 | M&L for coloured designer Chequered cement concrete tiles 300X300X25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer complete all as specified and as directed by Engr-in-Charge |
| 81 | M&L for Parking floor coloured heavy duty vitrified tiles (Square/rectangular ) polished, area of each tilesexceeding 0.06 Sqm butn exc 0.18 Sqm,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer all as specified and directed. |
| 82 | M&L for 60 mm thick precast cement concrete (M-35) colour rubberised factory made, machine pressed interlocking paver blocks, with grey cement and pigment any shape and size as approved by GE, laid over and including 25 mm thick sand cushion consolidated properly before and after laying of paver block complete all as specified and directed. |
| 83 | S&F in repair Vitreous china wash down water closet pan (Pedestal pattern incl one toilet paper holder, one health faucet and jet ingrated controlled by two way angle valve) incl plastic water closet seat white colour closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging devices complete all as specified and directed. |
| 84 | S & F in repairs 10 ltr capacity PVC low level flushing cistern with complete internal fittings with brass inlet float ball valve,CP brass handle for single syphonic action type complete all as specified and directed. |
| 85 | S&F in repair Vitreous China Urinals, half stalltype ( back wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, includingPVC flush pipe, grating , waste coupling and union for discharge pipe, waste pipe, CP spreader etc all as specified and directed. |
| 86 | S&F in repair urinal partition of 8mm thick forsted glass curved shaped chrome finish size 310x700mm all as specified and as directed by Engr-in-Charge |
| 87 | S & F in repairs counter wash hand basin vitreous china white oval shape size 440X525X195mm including PVC waste coupling 32mmsize,PVCwastepipe32mmbore complete making good the surface / joints with white cement complete all as specified and as directed. |
| 88 | S&F in repairs, wash hand basin vitreous china flat back 550 x400 mm size with pedestal white, first quality, with and including PVC waste coupling 32mmsize,PVCwastepipe32mmbore,bracketsofMildSteel angle iron (35mmx35mmx5mm) of suitable size including two coat ofsyntheticenamelpaintoveracoatofprimeroverangleiron brackets complete to walls complete all as specified and directed. |
| 89 | S&F 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed. |
| 90 | S&Finrepairsstop/anglevalves,15mmbore,fancytype,chromium plated,castcopperalloy, screwed down,highpressurewith crutchor butterfly handle,both endsscrewed foriron pipe orfor union etc., complete all as specified and directed. |
| 91 | S&F in repairs PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washersat both ends, complete all as specified and directed. |
| 92 | S&Finrepair, lookingmirror600x450mm, bevellededgesof selectedqualityglass,mountedon6mmthickcommercialplyor ACbuildingboardwithaluminiumframearoundandfixedto wooden plugs with CP brass screws all as specified and directed. |
| 93 | S&F 15mm Stop valve,fancy type, chromium plated with long shank and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed |
| 94 | S&F in repairs Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified and directed. |
| 95 | S&F in repairsbib tap,15mm bore,fancy type,chromium plated, castcopperalloywithcrutchorbutterflyhandlescreweddown, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 96 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 97 | S&F in repairs soap dish, brass chromium plated, complete all as specified and directed. |
| 98 | S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 99 | S&F sheet glass corner set of 5.5 mm thick glass of 3 piecesas per sample approved by Engr -in-charge all as specifed and directed |
| 100 | S&F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in anylengthwithrubberringjoints,laidintrenchesorinfloors, complete all as specified & directed. |
| 101 | S&Finrepairs 110mm borePVC(SWR)bends anyradius, complete all as specified and directed. |
| 102 | S&Finrepairs 110mm borePVC(SWR)bends with access door ofanyradius, complete all as specified and directed. |
| 103 | S&F in repairs110 mm bore PVC (SWR)junction single (Single T ) with access door equal or unequal, complete all as specified and directed. |
| 104 | S&F in repairs110 mm bore PVC (SWR)junction double (double T ) equal or unequal, complete all as specified and directed. |
| 105 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any lengthwithrubberringjointsfixedtowallsincludingsuitable clamps after every one meter of interval, complete all as specified and directed. |
| 106 | S&Finrepairs 75 mm borePVC(SWR)bendswith access dooranyradius, complete all as specified and directed. |
| 107 | S&F in repairs75 mm bore PVC (SWR)junction single (Single T )with access doore qual or unequal, complete all as specified and directed. |
| 108 | S&F in repairs75 mm bore PVC (SWR)junction double (double T ) with access door equal or unequal,complete all as specified and directed. |
| 109 | S&F in repairs110 mm bore PVC (SWR)vent cowl, complete all as specified and directed. |
| 110 | S&F in repairsbrass chromium plated grating 125mm dia with hole wate, complete all as specified and directed. |
| 111 | TakingupordownGI tubingwithallconnectionsandfittingsof 15 mmborecomplete all as specified and as directed. |
| 112 | TakingupordownGI tubingwithallconnectionsandfittingsof 20 mmborecomplete all as specified and as directed. |
| 113 | M&L for cutting chases in brick or concrete wall, floor, ceiling surface etc for cancelled water tubing and making good with pointingincementmortar1:3 exc 10cm but not exc. 20cm girth in brick walls etc.complete all as specified and directed. |
| 114 | S&F galvanized iron water tubing, ‘medium grade’ 15mm bore, with allfittingssuchasbend,tee,unionetc.,fixedcompletetowalls and ceilings or laid in floors,complete all as specified & directed. |
| 115 | S&F galvanized iron water tubing, ‘medium grade’ 20mm bore, with allfittingssuchasbend,tee,unionetc.,fixedcompletetofloor, walls and ceilings or laid in floors,complete all as specified & directed. |
| 116 | S&F Rotational moulded polyethelene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with closed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including20mmfor ball valve brass high pressure, with polyethylene float and fly nutcomplete all as specified and directed. |
| 117 | Taking down existing existing water proofing treatment from the top of RCC/arch slab, including taking down existing PCC padding tiles mud phuskaor plasterand hackingthe topofRCCslab,cleaning with water and disposal of rubbish outside the premises, complete all as specified and directed. |
| 118 | M&L for PCC (1:2:4), nominal mix, type B-1, using 20mm graded crushed stone aggregate as in PCC padding, benching on depression of roof finished even and fair without using extra cement, complete all as specified and directed. |
| 119 | M&L for 15 mmthickrenderingin cement mortar1:4on roofsurfaceusingwaterproofingcompundaspermanufacturer instructionsurfaces finished even and smoothwithoutusing extra cement asonwallcomplete all as specified and directed. |
| 120 | M&L for WaterproofingtreatmentwithAPP(Atactic Polypropylene)modifiedPolymericmemberaneoverroof consistingofcleaningofconcreteorplastersurfaceofroofand applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg [email protected]/25 gradeindustrialhotblown bitumenoveritlaid withAPP modified polymericwaterproofingmembraneminimumweight3.6kgper Sqmreinforcedwithnon-wovenpolyesterfabric(weightnotless than 160 gm persqm) unrolled& bondedto substratewith longitudinal and end laps 100mm as per manufacturer\"s instruction andapplyingoveritatackcoatusing85/25gradeindustrialhot blown bitumen @ 1.2 kg sqm andas per manufacturer instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls,cutoutneatlyahorizontalgroove6.5cmdeep,7.5cm widesectionwithloweredgeatnotlessthan15cmabovethe gradedroofsurfaceandgrooveshallbefinishedsmoothwith cement mortar 1:4 with WPC @3% by weight of cement where the parapet wall height is 45cm or less no groove will be required as the water proofing treatment will be carried over the top of parapet wall to its full thickness, complete all as specified and directed. |
| 121 | M&L for 40 mm thick brick tiles laid on cement mortar and joints grounted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement on above treated surface complete all as specified and directed. |
| 122 | All as per above item no 120 here-in-before but except brick tiles complete all as specified and directed. |
| 123 | Supply only integral water proofing compound complete all as specified |
| 124 | M&Lfor repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced withwelded mesh of weightexc 2kg per sq mtrbut n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor. |
| 125 | Dismantling of wall and ceiling or insulation boards/ slabs / PVC panelling any thickness and in any position incl frame grid and cover fillets and framework etc complete all as specified and directed. |
| 126 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified & directed by Engr -in charge. |
| 127 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified & directed by Engr -in charge. |
| 128 | M&L forfalse ceiling of 15mm thick fine fissure board sharped finished mineral fiber accoustic false ceiling tiles with back of the duly sanded and finished with a coat of protective paint and front duly finished of ARMSTONG/NITHOBO false system of size (600x600)mm having noise reduction co-efficient of 0.55 light reflection of 80% thermal conductivity k=0.057 W/WWC and humidity resistance of 95% fixed to true look PVC die KL-24 suspension system ( hot dipped galvanised steel section) of exposed T Section grid with exposed face powder coated white colour.The suspension system consisting of ceiling grid shall be following min sizes:main T section(24X38X0.3mm 3m long), Cross T section (24X25X0.3mm 6m long), wall angle (24X24X0.3mm 3m long),hanger rod 4 mmAdjust clip (85X30X0.8mm), soffit cleat (27X37X25X1.6mm) , Dash fastener (12.5 mm dia) complete all as specified and directed. |
| 129 | Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge |
| 130 | S & F mild steel work in tubular trussesincluding special shaped washersetc., complete using but ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240 withone shop coat of zinc chromate primer paint complete all as specified and directed. |
| 131 | S&F mild steel screws bolt (Machine made) with hexagonal or square heads one end screwed , each screwed end have one washer and one nut, dia of shank 11-15mm and length of bolt exec 5 cm and n exec 10cm complete all as specified and directed. |
| 132 | Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coveringscomplete all as specified and directed by Engr-in-Charge. |
| 133 | M&L for pre painted galvalume aluminium zinc coating havingGI based corrugated steel sheets 0.50mm thick of any colourtensile strength of 550 Mpa as in roof covering/cladding to wallwith self tapping screw complete all as specified and directed by Engr-in-charge. |
| 134 | S&F 2mm thick fibre glass reinforced translucent corrugated sheetingwithtwocorrugationsidelapfixedwithcoach screwsandwasherinroof,wall,chajjaetc.,completeallas specified & directed. |
| 135 | Taking down carefully unserviceable copper/aluminium point wiring (light,fan,socketorpower)completeincludingfixtureandfitting suchasswitches,ceilingroselampholder,regulators,sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type all as specified and as directed. |
| 136 | Dismantling and taking down fluorescent tube light single/double of any wattage orsize fittingfor repair or replacementof burnt/worn outaccessoriesorcarryingtoMESstore(Accessoriesor componentstobeprovidedfreeforreplacmentbydepartment), complete all as specified and as directed. |
| 137 | Taking down unserviceable sub main wiring of any type/size including wires, conduits/batten etc, complete all as specified and as directed. |
| 138 | TakingdownunserviceableDB\"sboxincludingMCB\"s ofany size/rating, complete all as specified and as directed. |
| 139 | M&LforpointwiringwithsinglecorePVCinsulatedunsheathed 1100 volts grade FRLScable ofcopper conductor multi stranded of size 1.5 sqmm (Nominal size) drawn through and including non metallic rigidPVCconduitmediumgrade,ISImarked notless then 20 mm dia with all accessories like tee, straight joint, L bend etcconcealedin wall,ceiling,flooretc,pressedGImodular boxes in wall of required size and colour for modular switches and sockets, 1.5sqmm (Nominalsize) PVC insulated (green insulation)copperconductorFRLSearthcontinuitycabledrawn withwiringandconnectedtocommonearthdolly allasspecified foronelightpointcontrolledbyoneSPswitchincludingmaking good distrubed surface, complete all as specified and directed.Note:- GI modularboxesand modular sheetsCostforcutting,chasingandmakinggoodto existing surfaces shall deemed to be included in the quoted rate. |
| 140 | AllasperSrlitemNo.138 here-in-beforebutforoneceiling fan/exhaustfan and wall mountedfan pointcontrolled by one SP switch, complete all as specified and directed. |
| 141 | All as per Srl item No 138 here-in-before but for one 5 pin socket outlet,6Ampsonsameboardwiththecable1.5Sqmmsize, complete all as specified and directed. |
| 142 | All as per Srl item No 138 here-in-before but for one 5 pin socket outlet,6AmpsonIndependentboardwiththecable1.5Sqmm size, complete all as specified and directed. |
| 143 | All as per Srl item No 138 here-in-before but for one power point 6 pin15Ampssocketoutletwith2.5Sqmm strandedcopper conductorFRLScablePVCinsulatedincludingearthwire2.5Sq mm copper conductor FRLS cable connected to earth dolly complete, all as specified and directed.Make of cable:Havells/Polycab/HPL. Make of conduit:Havells/Plaza/Kalinga. |
| 144 | All as per Srl item No 138 here-in-before but for one power point (for AC/Geyser)outletwith4.0Sqmm strandedcopper conductorFRLScablePVCinsulatedincludingearthwire4.0Sq mm copper conductor FRLS cable connected to earth dolly complete, all as specified and directed. |
| 145 | S&Fmodularsocket6Amps5Pin combined 02module complete,allasspecifiedanddirectedbyEngr-in-Charge. |
| 146 | S&F modular socket 6 and 16 Amps 3 & 6 Pincombined02 modulecomplete,allasspecifiedanddirected . |
| 147 | S&F modular switch one way 6 Amps one module complete allasspecifiedanddirectedbyEngr-in-Charge. |
| 148 | S&F modular switch one way 16 Amps, one module complete, all as specified and as directed by Engr-in-Charge. |
| 149 | S&Fofceilingrose,surfacetype,65mmx50mm, 3terminal complete all as specified and as directed by Engr-in-Charge. |
| 150 | S&F of lamp holder, PVC/polycarbonate type, insulated body with back plate of batten fitting complete all as specified and as directed by Engr-in-Charge. |
| 151 | S&F of LED bulb 09 watt, complete all as specified and directed. |
| 152 | S&F energy saving slim designlight fitting 230 Volts surface mounted complete with high efficiency PMMA diffuser soft glare free light LED tube light 20 watt,with all accessories, pre-wired, etcincluding providing flexible copper wire,threecorecablePVCinsulatedsheathed,completeallas specified and directed by Engr-in-Charge. |
| 153 | S&F LED bulkhead luminaire 10 watt, wall/surface mounted complete with LED lamp 10 watt, all accessories, pre-wired includingprovidingflexiblecopperwire, twincore cablePVC insulated sheathed, complete all as specified and directed by Engr- in-Charge. |
| 154 | S&F LED sleek mirror light fitting 10 watt provided with high output diffuser2feet,230VoltscompleteLEDtube rod10 wattwith all accessories, pre wired and including connecting up with twin core copper conductorcable completeall asspecified and directed by Engr-in-Charge. |
| 155 | Takingdownceiling/ Wallfansofanysweepandanysizeincluding cable connectionsand disconnecting of fan bladesand removing thefanwithbladesdeposit tostoreyardasitisinworking conditionforfurtherhanginginitsoriginalposition oranyother position including as per direction of Engineer-in-Charge including it\"s fitting and fixtures after carrying out service includes cleaning, greasingandoiling, paintingoffanwithonecoatofsynthetic enamelsprayingpaintingafterpreparationofsurfacereassemblingthefanetc including testing complete all as specified and as directed by Engr- in-charge.Note:-Anydamagehastobemadegoodbythecontractorto make the item functional after testing. |
| 156 | S&FFan step regulator, 120W 230 volts, 50 HZ, AC. Supply complete all as specified and as directed by Engr-in-Charge. |
| 157 | Takingdownexhaustfansofanysweepandanysizeincluding cableconnections andremovingtheexhaustfanwithblades depositto store yard as it is in working condition for further fixing initsoriginalpositionoranyotherpositionasperdirectionof Engineer-in-Charge including it\"sfittingand fixturesafter carrying outservicei.e.cleaning,greasing and oiling, paintingof exhaust fanwithonecoatofsyntheticenamelsprayingpaintingincluding markingofMESnumberwithblackpaintafterpreparationof surface reassembling the fan etc including testing complete all as specified and as directed by Engr-in-charge.Note:-Anydamagehastobemadegoodbythecontractorto make the item functional after testing. |
| 158 | M&Lforsubmainwiringwithtwosinglecore 6.0sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25mmdia,mediumgrade ISImarkedwithallconduitfittings& fixingaccessoriesandonesinglecore6.0Sqmm multistranded copperconductorcableascontinuousearthwirecomplete all as specified and directed.Note-(a)Thethreerunsofsinglecorecableandspecifiedearth continuity conductor and PVC conduit with fitting acessories will be measured as one run.(b) Cost of cutting, chasing and make good to existing surfaces are deemed to be including in the quoted rate by the contractor. |
| 159 | S&F in replacement sheet metal enclosures single pole and neutral earth enclosure with a two pin and earth plug and socket complete withonesinglepoleMCB20amps,240volts,completeallas specified and directed. |
| 160 | S&F sheet metal enclosure for distribution board SPN (when MCBs to be used) 12 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. |
| 161 | S/Fix Vertical MCB DB TPN 4 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V including provision for mounting MCCB upto 125 Amps rating complete all as directed by Engr-in-Charge. |
| 162 | S&FofMCBSP,6-32A,10KAcompleteallasspecifiedandas directed by Engr-in-Charge. |
| 163 | S&FofMCBSPN,32A,10KAcompleteallasspecifiedandas directed by Engr-in-Charge. |
| 164 | Supply and fixing 4 Pole MCCB 125 Amps 50 Hz 415 V with rupturing capacity 16 KA with thermal setting of 80 to 100% complete all as specified and directed. |
| 165 | M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earthpitnotlessthan2.25metersbelow groundlevel)withtop edgeofearthplatenotlessthan1.5metersbelowgroundlevel connected to galvanized earth wire 4.00 mm diaby means of nuts, bolts, thimbles, check nuts, washers of GI or steel,PCC (concrete chamber of size 300 mmx 300 mm x 300 mminside dimension) shallbePCC1:3:6typeC-1 (using20mmgradedcrushedstone aggregate)withfairfinish, internalsurfaceofconcretechamber shallbegiven15mmthickplasterinCM1:4,funnelwithwire gaugeof22gauge,8meshperlinerinch,80mmthickPCCpit cover320mmx320mmofRCC1:2:4typeB-1(using20mm graded crushedstoneaggregate)reinforcedwith XPMJALLIand charcoal dust and common salt all as shown in electrical plate No 3 ofMESSSRPart-I(2009)andspecifiedincluding provisionof earthwireprotectedby15mmdiamediumgradeGIpipeand watering GI pipe shall be 20mm bore medium grade etc complete, allexcavationand earthwork&connectingtheearthingtoan earthingtestpointmainswitchboard asspecifiedandtestingon completion complete all as specified & directed. |
| 166 | Taking down window type Air conditioner of capacity 1.5/2 ton and shifting from one location to other location in the Offrs Institute AF area, fixing with all required accessories including charging of refrigerent upto desired pressure all asdirected by Engineer-in-Charge. |
| 167 | S & F Galvanised Tube 100 mm bore, \"Medium grade\",ISI marked as per IS 1239 part-I with all fittings ISI marked including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line in trenches/road/ nallah & fixed along walls/polls including mild steel clamps, screws etc, including taking down of old rusted iron tube, complete all as specified and directed by Engineer-in-Charge. Note: Earthwork shall be measured and paid seperately |
| 168 | S & FGalvanised Tube 50 mm bore, \"Medium grade\",ISI marked as per IS 1239 part-I with all fittings ISI marked including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line in trenches/road/ nallah & fixed along walls/polls including mild steel clamps, screws etc, including taking down of old rusted iron tube, complete all as specified and directed by Engineer-in-Charge. Note: Earthwork shall be measured and paid seperately |
| 169 | S & FGalvanised Tube 25 mm bore, \"Medium grade\",ISI marked as per IS 1239 part-I with all fittings ISI marked including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line in trenches/road/ nallah & fixed along walls/polls including mild steel clamps, screws etc, complete all as specified and directed by Engineer-in-Charge. Note: Earthwork shall be measured and paid seperately |
| 170 | Supply and fixing of Gun-metal, globe or gate valves screwed down high pressure, heavy duty (ISI marked), with iron wheel head, screwed both ends for iron pipe or for unions suitable for 25 mm bore pipe, complete all as specified and directed by Engineer-in-Charge. |
| 171 | Supply and fixing of Gun-metal, globe or gate valves screwed down high pressure, heavy duty (ISI marked), with iron wheel head, screwed both ends for iron pipe or for unions suitable for 50 mm bore pipe, complete all as specified and directed by Engineer-in-Charge. |
| 172 | Supply, fixing, commisioning and testing of 100mm bore CI Sluice Valves , conforming to IS:14846. The valves shall be flanged having solid wedge gate valve, OS&Y Type, hand wheel with open-close indications etc all conforming to IS:780 but of nominal pressure rating of PN 1.6 as per TAC approved complete all as specified and directed by Engineer-in-Charge. |
| 173 | Supply, fixing,testing and commissioning of 2 HP single phase open well submersible pump along with required base frame with approved make starter along with necessary cable up to starter as per the site requirement and as directed by Engineer In Charge. Make : Kirloskar KOSi-245 or equivalent. |
| 174 | Supply, fixing and testing 50mm dia pressure release/ relief valve in the delivery side of pump in any size of pipe as directed by Eng in charge. |
| 175 | Excavation in trenches by cutting of road crossing, PCC hard standing for laying of pipe line/cable including making good the existing surface with same finish to match the original finish using PCC 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and as directed by Engineer-in-Charge |
| 176 | Material & labour for river washed and screened dry sand forfilling under and above the under ground cable for cushioning of cables etc.complete all as specified anddirected by engr –in-charge |
| 177 | M&L for Cutting holes not exceeding 150 Sq CM for passing cable, pipe etc into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete complete all as specified anddirected by engr –in-charge |
| 178 | Material and labour for plastering, Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM1:4 complete all as specified and directed. |
| 179 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 4 core complete all as specified anddirected by engr –in-charge |
| 180 | Construction of brick masonry valve pit of size 120cmx120cmx120cm (Type \"B\") (internal dimensions) of chamber, depth of chamber to be reckoned from the top of PCC in foundation to top of MS cover and including MS sheet cover fabricated from 3.15mm thick MS sheet and frame of angle iron 50x50x6mm with fixing arrangement, hinges and locking arrangement and painting two coats of synthetic enamel paint over a coat of red oxide primer on MS cover and frame including necessary excavation earth work in any type of soil returning, filling in, disposal of surplus soil, PCC (1:2:4) work, complete all as specified. (Ref drawing : CE AF/STD-28/94 sheet no 1/2 & 2/2 dated 01.02.94. |
| 181 | Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
