Tender For Day To Day Petty Repair Works Of B/R Nature At Af Stn Mohanbari Under Ge (Af) Mohanbari
Tender Value
15 Lakhs
Estimated cost
Bid Submission
26 Jun 2023
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mohanbari → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Day To Day Petty Repair Works Of B/R Nature At Af Stn Mohanbari Under Ge (Af) Mohanbari
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Jun-2023 | Amendment bid submission start, end and opening date | Date | 26-Jun-2023 |
| 2 | 11-Jun-2023 | Amdt in BOQ | BOQ | 26-Jun-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Attending day to day complaints related to joinery work such as repairs to cupboard, kitchen shelves, pelmet box, easing of doors and windows, kitchen knobs, tighting of wire mess, glass, easing of door tightening door /window easing of door shutter etc including taking down of existing material as ordered/required on all working day to attend the complaint cell by rep of contractor at 0900 AM and report to complaint cell at every evening at 0500 PM on daily basis after satisfactory completion,complete all as specified and directed. Material such as nails,screws, washers, putty/beading for glass, nut & bolts etc as per site requirement shall be included in the the quoted rate.Note :- (i) The complaint against docket shall be taken from MES Complaintcell at every morning at 0900 AM by rep of contractor on daily basis.(ii) Every docket will submit at complaint cell of daily basis on same day at 0500 PM or early morning on next day after satisfacotry complition. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractors.(iv)Rs. 100.00/complaint shall be recovered against non attending of every complaints. (v) Material will be measured and paid separatly under respective items. |
| 2 | Supply only 6mm thick plywood, graded BWR, type BB with 05 nos ply layer fixed to timber frame work of any thickness or any other, complete all as specified and directed. |
| 3 | Supply only in repair galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm including necessary beadings, cleats and fillets including dismantling complete all as specified and directed. |
| 4 | Supply only in repair 3 mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm in each pane including dismantling complete all as specified and directed. |
| 5 | Supply only figured glass pin headed type in square n exc 0.50 Sqm, in square or reqd shape of 4mm thick in each pane including oil putty complete all as specified and directed. |
| 6 | Supply only 150mm long alumnium barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. |
| 7 | Supply only 200mm long aluminium barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. |
| 8 | Supply only 150mm long alumnium pressed handle, oval type stove enamelled black complete all as specified and directed. |
| 9 | Supply only forblock board or veneered particle board for external teak wood lipping, 6mm thick fixed with nail all as specifed and directed. |
| 10 | Supply onlysteel plate rack of 600x 900 x 250 mmall as specified anddirected. |
| 11 | Supply only aluminium door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 12 | Supply only in repair 4mm thick Plywood, grade BWR, type BB, fixed with nailsto timber frame work or in roof for monkey protection. Note : Work may be executed in patch work also. |
| 13 | Supply onlyin repair 25 mm dia curtain rod, mild steel, chromium plated with fixing brackets,stops, rollers etc, complete all as specified. |
| 14 | Supply only 250mm long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 15 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 16 | S & F for powder coated GI Snap grid system of size 605 X 605 mm for ceiling fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the following sections complete all as specified and directed:- (i) Main Tee 28mmx24mmx0.3mm thick, (ii) Cross Tee 28mmx24mmx0.3mm thick and (iii) Wall angle 24mmx24mmx0.3mm thick complete all as specified and directed. |
| 17 | S & F 4 mm thickin repairs designer ceiling (E-board classic tiles) for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or GI sanp grid or with staples on snap grid as in ceilingwith and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed. |
| 18 | Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 19 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 20 | All same as per item no. 19 above but except sheeting (any thickness) complete all as specified and directed . Note :- Old sheet obtaind from item No 18 above shall be used) |
| 21 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 22 | All same as per item no. 21 above but except sheeting (any thickness) complete all as specified and directed . Note :- Old sheet obtaind from item No 18 above shall be used) |
| 23 | Supplying and layingin repairs APP based modified water proofing polymeric membrane, reinforcemed with non woven polyester fabric matt (weight not less than 150 gms/sqm) ofminimum 3 mm thick and minimum weighing not less than 3 kg/sqm,all as per manufacturers instructions as complete all as specified and directed . Note:- Work may be executed in patch work also, contractor quoted rate shall be deemed to be considered this aspect. |
| 24 | Repair/ resecuring of aluminium doors, easing & adjusting including replacement damage part and assoceries if required including taking down and refixing in same opening etc complete all as specified and directed. |
| 25 | Attending day to day complaints related to water supply & plumbing work only such as leakage of bib cock/pillar cock/ stop cock angle valve of any description changing the washers, cleaning of air lock in the pipe, leaking low level or high level flushing cistern by adjusting the float valve and including removal/taking down of existing material or for refixing of same or replacement of rubber washer in PVCsyphons/bath fittings and adjusting the float valve of over head tanks and leaking PVC bends/galvanised iron pipes etc as per site requirement on all working day to attend the complaint cell by rep of contractor at 0900AM and report to complaint cell at same day at 0500 PM on daily basis after satisfactory completion, complete all as specified and directed. Material such as threads, washers, lead etc shall be included in the quoted rate.Note :- (i) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900 AM by rep of contractor on daily basis.(ii) Every docket will submitted at complaint cell on daily basis of same day at 0500 PM or early morning on next day after satisfacotry completion. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractors.(iv)Rs. 100.00/complaint shall be recovered against non attending of every complaints. (v) Material will be measured and paid separatly under respective items. |
| 26 | Supply only 15 mm borebib tap,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 27 | Supply only\" flushing cistern kit\" for complete set to fitted inside as per requirement for cistern functional complete all as specified and directed. |
| 28 | Supply and15 mm bore bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 29 | Supply only 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 30 | All as above item No 29 but 20mm bore -dittto- |
| 31 | Supply only 15 mm bore Stop valves, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 32 | Supply only 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 33 | Supply only 15 mm bore brass CP wall Mixer with hand shower swan neck , cast copper alooy with capstan head chromium plated screwed down, high pressure with or without lettered hot or cold mix with long screwed shank and fly nuts screwed down for iron pipe and fixed complete all as specified and directed. |
| 34 | Supply only 15 mm bore brass CP Wash Hand Basin mixer with , cast copper alooy with capstan head chromium plated screwed down, high pressure with or without lettered hot or cold mix with long screwed shank and fly nuts screwed down for iron pipe and fixed complete all as specified and directed. |
| 35 | Material & Labour 32mm waste fittings, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed. |
| 36 | All as per item No. 35here- in- before but 50 mm dia for sink coupling. |
| 37 | Supply onlyCP Grating doom 125 mm dia(minimum wt 40grms) complete all as specified and directed. |
| 38 | Supply only 15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed complete all as specified and directed. |
| 39 | Supply only 15mm bore ball valves, high pressures of PTMT, withepoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) (Make: Prayag/Shakti) complete all as specified and directed. |
| 40 | All as per item No. 39here- in- before but size 20mm dia and Minimum wt (for 20mm -210gms) (Make: Prayag/Shakti) |
| 41 | Supply only water tank cover for tanks of size 500 ltr or 1000 ltrs capacity water storage tank complete all as specified and directed. |
| 42 | Supply only PVCseat cover forEWC of white colour complete all as specified and directed. |
| 43 | Supplyonly health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 44 | Supply only15mm bore steel water tubing medium grade galvanized for fixed to walls, floors, roof ceiling etc including thread, solvent etc complete all as specified and directed. |
| 45 | Supply only 20mm bore steel water tubing medium grade galvanized for fixed to walls, floors, roof ceiling etc including thread, solvent etc complete all as specified and directed. |
| 46 | Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 47 | All as per item No.46here in before but 600mm long. |
| 48 | Supply only GI nipple, and socket 15mm bore size complete all as specified and directed. |
| 49 | Supply only GI nipple, and socket 20mm bore size complete all as specified and directed. |
| 50 | Supply only GI Elbow, and Tee 15mm bore size complete all as specified and directed. |
| 51 | Supply only GI Elbow, and Tee 20mm bore size complete all as specified and directed. |
| 52 | Supply only Socket reducer, and Tank connection 20mm bore size complete all as specified and directed. |
| 53 | Supply only 32mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed. |
| 54 | Supply only 40mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed. |
| 55 | Supply only 500 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed. |
| 56 | Supply and fixing 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 1000 Ltr capacity complete all as specified and directed. |
| 57 | Attending day to day complaints pertaining to different type of repairs of steel windows, handles, door springs, frame, rolling shutter garrages, repair by welding etc (run or spot welding as per site requirement) on all working day to attend the complaint cell by rep of contractor at 0900 AM along with welding machine, gloves, welding glass, welding rod etc or any other tools required and report to complaint cell at same day at 0500 PM on daily basis after satisfactory completion, as per time to time requirement completeall as specified and directed.Note :- (i)The above task shall be carried out by deploying Minimum01 No Welder and 01 No of helper on daily basis. (ii)Necessary T&P, equipment and safety gear shall be provided by the contractors.(iii) Contractor or his auth rep shall sign the Attendance register and Demand register daily.(iv) Rs. 100.00/day shall be recovered for non deployment of labour as per demand register.(v) Material will be measured (after fixing) and paid separtely as supply only under respective items. |
| 58 | Supply onlybutt hinges med weight cold rolled MS, size 100 mm long complete all as specified and directed. |
| 59 | All as above item No 58 but 75 mm long. |
| 60 | Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed. |
| 61 | M & L for 15 mm thick renderingof brick work or stone masonry surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 62 | M&L rendering 15mm thick on fair faces of brick or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.Note for item No 61 & 62 : Work may be executed in patch also, contractor quoted rates shall be deemed to be considedred this aspect.) |
| 63 | M&L for preparation of new plastered surfaces and applying two coats of Oil Bound Disterper over a coat of primer complete all as specified and directed. |
| 64 | M&L for preparation of new plstered surfaces of walls and applying two coat of cement base paintover a coat of primer complete all as specified and directed. |
| 65 | Supply only as in repair 10 ltr capacityPVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, complete all as specified and directed. |
| 66 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
AI Tender Summary
Tender Timeline
Jun 11, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 26, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 26, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 26, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender