Public Works Department-PWD has published Tender For Sanitary Fitting Of Sports Hostel Facilities At Skara Juk.. Submission Date for this Tender is 12-06-2023. Plumbing and Sanitary Work Tenders in Leh Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All Kind of soil |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 3 | Providing and laying dumping of stone inclduing cost of stone on horizontallevel.: |
| 4 | Random Rubble masonry with hard stone in foundation and plinth includinglevelingupwithcementconcrete1:6:12(1Cement:6coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 5 | Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stone. |
| 6 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) |
| 7 | Reinforcedcementconcreteworkinwalls(anythickness)includingattachedpilasters, buttresses,plinthandstringcourses,fillets,columns,pillars,piers,abutments,postsand struts uptofloorfivelevelincludingcuringbutexcludingcostofcenteringshuttering, finishing & reinforcementReinforcedcementconcreteworkinwalls(anythickness)includingattachedpilasters, buttresses,plinthandstringcourses,fillets,columns,pillars,piers,abutments,postsand struts uptofloorfivelevelincludingcuringbutexcludingcostofcenteringshuttering, finishing & reinforcement. . |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Columns, pillars, piers, abutments, posts and struts |
| 10 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Suspended floors, Roofs, Landings, Balconies and Access Platforms. |
| 12 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 13 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Providing and fixing white vitreous china European type W.C. pan with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : Long pattern W.C Pan of size 580x440 mm |
| 16 | Providing and fixing white vitreous china Indian type W.C. pan with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 17 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: one urinal basin with 5 liter white P.V.C automatic flushing cistern. |
| 18 | Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630 x 450mm with a pair of 15mm C.P. brass pillar taps. |
| 19 | Mirror of superior make glass including frame complete job. |
| 20 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 21 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) |
| 22 | Providing and fixing of connecting pipe including all complete job. |
| 23 | Providing & fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropytene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.)Pn-16 pipe, 25mm 00 |
| 24 | Pn-16 pipe, 32mm 00 |
| 25 | Pn-16 pipe, 40mm 00 |
| 26 | Providing and Fixing PVC pipes including all fitting complete job.90 mm |
| 27 | 110 mm |
| 28 | 150 mm |
| 29 | PVC single equal Tee (without door) 90x90x90 mm |
| 30 | 110x110x110 mm |
| 31 | 150x150x150 mm |
| 32 | Providing and fixing thermocold/K- flex and taping over pipe line for insulation all complete job. (Inner pipe) Pn-16 pipe, 25mm 00 |
| 33 | Pn-16 pipe, 32mm 00 |
| 34 | Providing and fixingthermocold/K- flex, chicken mesh over resin glass wool andaluminum sheet to avoid loss of heat in surrounding area.Pn-16 pipe, 40mm 00 |
| 35 | Providing and fixing heat tape 30watts of multi layer including wiring over pipe line in spring shape all complete job |
| 36 | Provision for water circulation system in supply line vie Hydropneumatic pumping and circulation system . Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) 25 mm |
| 37 | 32mm |
| 38 | 40 mm |
| 39 | Providing and fixing Hydropneumatic pump of any approved make including pump base of RCC M:20 grade of size 1200 x 1200 including connection to main supply line with necessary fittings, All complete Job |
| 40 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 41 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
| 42 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 43 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 44 | C.P. brass Toilet paper holder of standard size |
| 45 | Providing and fixing PTMT liquid/soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 46 | Towel rail C.P. brass 600 x20 mm together with a pair of C.P. brass brackets to fit the size of towel rail |
| 47 | Providing floor water drain grating made up of stainless steel. |
| 48 | Rectangular shape 600x450 mm precast R.C.C. manhole cover. |
| 49 | Providing & fixing ball valve (PPR) of approved quality complete |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 51 | Insulating water tank/sentex using K flex, polythene, glass wool, chicken mesh and cover with aluminium foil complete job. 1000 ltr capacity |
| 52 | Providing and fixing jet spray including connecting pipe all complete job. |
| 53 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 54 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) Powder coated aluminum (minimum thickness of powder coated 50 microns) (Brown Colour) |
| 55 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 56 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on both sides. |
| 57 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 58 | Providing and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with SS screw etc. complete as per direction of Engineer-in-charge. Anodized (AC 15) aluminum tubular handle bar |
| 59 | Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 60 | Carriage of materials from source to site by MT. Cement and steel an avg. lead of 1.0 Km |
| 61 | Sand an avg. lead of 20 Km |
| 62 | Aggregate an avg. lead of 20 Km |
| 63 | Stone an avg. lead of 25 Km |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
