Public Administrative Department Local Bodies Closing in 0 days TDR #37898840

Tender For Dharapuram Municipality Construction Of 5 Mt Micro Compost Processing Centre(Mcc) At Compost Yard In Dharapuram Municipality

Issued by Local Bodies · dharapuram, Tamil Nadu
Tender Value
23.83 Lakhs
Estimated cost
Bid Submission
02 Jun 2023
0 days left
EMD
23830
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
dharapuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Dharapuram Municipality Construction Of 5 Mt Micro Compost Processing Centre(Mcc) At Compost Yard In Dharapuram Municipality Construction Of 5 Mt Micro Compost Processing Centre(Mcc) At Compost Yard In Dharapuram Municipality

BOQ

Name of Work: :Construction of 5 MT Micro Compost Processing Centre(MCC)at Compost Yard in Dharapuram Municipality
Sl. No. Item Description
1Dismantling in Plain Cement Concrete clearing away and carefully stacking materials useful for reuse for any thickness of walls includingall charges etc .,complete as per standard specifications.
2Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete
3Plain Cement Concrete 1:4:8 (one cement, four Crushed stone Sandand eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
4Supplying and Erecting Steel Centering for sides andsoffits including supports and strutting upto3.29 m height for planesurfaces such as RCC Slabs, Rectangular Beams, TEE or ELL Beams, Lintels, Bed blocks, Staircase waist and Landing slabs, Landing Beams, canopyetc., with all cross brasingsusing mild steelsheets of size 90cmx60cm and 10 gauge stiffenedwithwelded MS anglesof size 25mmx25mmx3mm for boardinglaid over silver oak (CW) joists of size 10cmx6.5 cm spaced at about90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/cetc., complete complying with standard specification and as Directed .
5Slab & Lintel
6Drain
7Plain Cement Concrete 1:1.5:3 (one cement, one and half Crushed stone Sandand three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
8Reinforced Cement concrete 1:1.5:3 (one cement, one and half Crushed stone Sand& three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCCitemsof works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and alsoincluding fixingfan clamps and fixtures in rccworkswherever necessary as directed by departmentalofficer etc., complete.
9Ground floors
10Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors.
11Brick work in CM 1:5 (one cement & five Crushed stone Sand ) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT
12Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
13Plastering with cement mortar (1:4) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
14Supply and fixing of Weld Mesh 7.5 x 2.5cm 10 Gauge including all cost & conveyance
15Supplying and erecting pull and push type rolling shutter with I.S.I. make of approved size and section using 18 gauge G.I.sheet with manually operated type. The Shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification.
16Plain Cement Concrete 1:3:6 (one cement, three Crushed stone Sandand six coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
17Plain Cement Concrete 1:2:4 (one cement, two Crushed stone Sandand four coarse aggregates) using 10mm 50% 12mm 50% size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification
18Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two Crushed stone Sand ) over 10 mm base layer plastering and pointing with white cement neatly as directed.
19Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
20Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required size and making ornamental designs as per the site condition and as directed by the departmental officers.
21White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333
22Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete
23Supply and Fixing RCC Pre Cast Slab RCC 1:1.5:3 mix (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCCitemsof works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and alsoincluding fixingfan clamps and fixtures in rccworkswherever necessary as directed by departmentalofficer etc., complete.
24Supply and delivery of PVC pipe specials
2575mm PVC Pipe
2675mm PVC Tee
2775mm PVC Elbow
2875mm PVC Cowl
2925mm UPVC Pipe
3025mm UPVC Tee
3125mm UPVC Elbow
3225mm x 20mm UPVC Reducer
3320mm Ball valve
3420mm Brass hose nipple
3520mm Hose (100 feet)

AI Tender Summary

OUR REF NO 37898840
AUTHORITY Local Bodies
TENDER VALUE 23.83 Lakhs
LAST DATE 02-06-2023
Authority
Authority Name Dharapuram Municipality
Work Description Dharapuram Municipality Construction Of 5 Mt Micro Compost Processing Centre(Mcc) At Compost Yard In Dharapuram Municipality Construction Of 5 Mt Micro Compost Processing Centre(Mcc) At Compost Yard In Dharapuram Municipality
Basic Detail
Tender No 4783/2023/E1
Bidding Type Tender
Location
City dharapuram
State Tamil Nadu
Key Dates
Publish Date 29 May 2023
Submission Date 02 Jun 2023
Open Date 02 Jun 2023
Finance
Tender Value 23.83 Lakhs
Tender Fee Ref. Documents
EMD 23830
Exemption Not Available
Document List
9f9242a9-2b83-4d26-9fac-f988d4b9105c.html
BOQ_380079.xls
MCCCompostyardTenderNotice.pdf
TechnicalBid.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 29, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 02, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 02, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

9f9242a9-2b83-4d26-9fac-f988d4b9105c.html

xls

BOQ_380079.xls

pdf

MCCCompostyardTenderNotice.pdf

pdf

TechnicalBid.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders