Public Works Department-PWD has published Tender For Providing And Fixing Energy Efficient Led Tube Lights And Temp. Arrangement Of Air Conditioners Etc. On Hire Charge During Ac Plant Renovation In Main Building At Rajasthan High Couret Bench Jaipur.. Submission Date for this Tender is 01-06-2023. LED Light Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure "A" attached with this BSR |
| 2 | 20 mm |
| 3 | 25 mm |
| 4 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure "A" attached with this BSR |
| 5 | 3x 1.5 sq.mm |
| 6 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 7 | Providing & Fixing ofBEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanConforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . |
| 8 | 1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) |
| 9 | Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / SqaureSMD Mid Power LED Downlight with power coated die-cast aluminum housingwith UV Stabilized non yellowish Diffuser withBIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of = 110 lm / watt, THD < 10 % , Pf.=0.95, CRI >80,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. |
| 10 | OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . |
| 11 | Recessed Mounting |
| 12 | Minimum lumen output 1600 lm |
| 13 | Providing & Fixing of IP20, 2"x2" LED Surface/ Recessedmounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection(Integral with light fixture). System lumen efficacy of = 120 lm/Watt ,THD < 10 % , p.f.=0.95,CRI >80 ,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. |
| 14 | OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . |
| 15 | Recessed Mounting |
| 16 | Minimum lumen output 4200 lm |
| 17 | Surface Moutning |
| 18 | Minimum lumen output 4200 lm |
| 19 | Providingexperienced and Highly skilled/skilled/ semi-skilled/Un Skilledlabour for electric repair/ maintenance / operation of Air conditioning/Air cooling/Fire fighting/Lift/DG set/CCTV/EPABX or any other electromechanical systems as per requirement (one shift of 8 Hrs per day for 26 Working Days in a month) |
| 20 | Highly skilled Labour |
| 21 | skilled Labour |
| 22 | Charges for Providing of experienced and Highly skilled/ skilled/semi-skilled/ Un skilledlabour for electric repair/ maintenance/operation of Air conditioning /Air cooling / Fire fighting /Lift/D G set /CCTV/EPABX or any other electromechanical services/ systems as required.( One shift of 8 Hours per day ) |
| 23 | Highly Skilled Labour |
| 24 | Semi skilled labour |
| 25 | Hire charges for LEDtube light fixture with 18/20 wattwith skilled operator to operatesystem as and when etc as required. (If work contineue for more then one day , rates for nextsubsequent days will be 50% of the original rates.) |
| 26 | (If work contineue for more then one day , rates for nextsubsequent days will be 50% of the original rates.) |
| 27 | Hire charges for Light fixture with CFL 9 / 11/ 13 / 15 wattwith skilled operator to operatesystem as and when etc as required. (If work contineue for more then one day , rates for nextsubsequent days will be 50% of the original rates.) |
| 28 | (If work contineue for more then one day , rates for nextsubsequent days will be 50% of the original rates.) |
| 29 | Hire charges of Main service line for 3 phase connection upto 50 mtr. Length (without any joint) including meter board, panel/distribution Board and supportswith skilled operator to operatesystem as and when etc as required. (If work contineue for more then one week , rates for nextsubsequent weekswill be 50% of the original rates.) |
| 30 | Upto 25.0 sq.mm size PVC insulated and Sheathed cable(Armoured or Un-armoured as required.) |
| 31 | (If work contineue for more then one week , rates for nextsubsequent weekswill be 50% of the original rates.) |
| 32 | above 25.0 sq.mm & upto 95 Sq.mm PVC insulated and Sheathed cable(Armoured or Un-armoured as required.) |
| 33 | (If work contineue for more then one week , rates for nextsubsequent weekswill be 50% of the original rates.) |
| 34 | above95.0 sq.mm PVC insulated and Sheathed cable(Armoured or Un-armoured as required.) |
| 35 | (If work contineue for more then one week , rates for nextsubsequent weekswill be 50% of the original rates.) |
| 36 | Hire charges of Sub service line for single/ three phase connection upto 30 mtr. Length includingdist. Board and supports with skilled operator to operatesystem as and when etc as required.(If work contineue for more then one week , rates for nextsubsequent weekswill be 50% of the original rates.) |
| 37 | Single phase upto 6 Sqmm PVC insulated and Sheathed cable |
| 38 | (If work contineue for more then one week , rates for nextsubsequent weekswill be 50% of the original rates.) |
| 39 | Three phase & neutral upto 10 SqmmPVC insulated and Sheathed cable |
| 40 | (If work contineue for more then one week , rates for nextsubsequent weekswill be 50% of the original rates.) |
| 41 | Hire charges for following type of Airconditionersincluding copper piping , drain piping and electrical connections with skilled operator to operatesystem as and when etc as required. (If work contineue for more then one day , rates for nextsubsequent days will be 50% of the original rates.) |
| 42 | 2.0 TR Split AC |
| 43 | (If work contineue for more then one day , rates for nextsubsequent days will be 50% of the original rates.) |
| 44 | 3.0 /4.0 TR Tower type split AC |
| 45 | (If work contineue for more then one day , rates for nextsubsequent days will be 50% of the original rates.) |
| 46 | 5.0/5.5TR ductable type Split AC |
| 47 | (If work contineue for more then one day , rates for nextsubsequent days will be 50% of the original rates.) |
| 48 | Labour charges for removing and refixing of Ceiling fan/ Exaust fanfrom site |
| 49 | Providing & Fixing of IP20, 1"x4" 36W (1195mmx295mmx65mm) Recessed mounting Mid power SMD type LED fixture not less then 50mm housing depth made from CRCAsheet steelhousing , High purity /transmisivity UV stabilized Non-yellowish diffuser for uniform light distribution. High Efficiency with 3kv internal surge protection BIS certified isolated driver having efficiency >85% , with Short & Open circuit protection, (integral with light fixture).System lumen efficacy = 120 lm/Watt , total system lumen 4250 lm, THD < 10% , P. F.=0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEMmust have its own in house NABL lab setup for all testing facilities for LEDfixtures.(LM79&LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR 2022. |
| 50 | Providing & Fixing of IP20, 1"x1" 15W (295mmx295mmx70mm) LED Recessed mounting Mid power SMD type LED fixture not less then 50mm housing depth made from CRCAsheet steelhousing , High purity /transmisivity UV stabilized Non-yellowish diffuser for uniform light distribution. High Efficiency with 3kv internal surge protection BIS certified isolated driver having efficiency >85% , with Short & Open circuit protection, (integral with light fixture).System lumen efficacy = 100 lm/Watt , total system lumen 1500 lm, THD < 10% , P. F.=0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEMmust have its own in house NABL lab setup for all testing facilities for LEDfixtures.(LM79&LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR 2022. |
| 51 | Labour Charges For Removing and Refixing ofFire Detectorsas directed by the Engineer-in-Charge. |
| 52 | Labour Charges For Removing of Tubelight 2x36W/2x28W/2"X2" Fixtures Etc. and shiffting to the suitable Location As per the instructions of the Rajasthan High Court authorities. |
| 53 | Labour Charges for Removing and Refixing of9"x9"/1"x1"Sizes LED Fixturesas directed by the Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
