Military Engineer Services-MES has published Tender For Repairs To Joinery, Aluminium Doors/Ventilators, Steel Windows/Ventilators, Cup Boards, Rolling Shutters, Steel Doors, Pvc Doors, Wooden Doors And Windows Etc And Repairs To Floor, Plaster, Plinth Protections And Misc Items Other Connected. Submission Date for this Tender is 26-06-2023. Civil Work Tenders in Pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Jun-2023 | amendment BOQ | BOQ | 19-06-2023 |
| 2 | 08-Jun-2023 | revise tender document | Other | 19-06-2023 |
| 3 | 19-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-06-2023 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames, not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 2 | Taking down chowkats or frames, exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 3 | Taking down shutters only of size exc 1.00 Sqm but not exceeding 2.00 Sqm |
| 4 | S&F 2nd class hard woodplain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred, put to gether with glue pinned at joints supplied and fixed all as specified and directed. |
| 5 | M&L preparing surfaces of wood and wood based and treating ends of posts, back of chowkats. etc area exc 0.1 sqm but not exc 0.5 sqm each complete all as specified and directed. |
| 6 | S& fixed factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edged or panel of 9mm BWP commercial ply over 12mm thick veneered particle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 7 | S&F 30mm thickflush shutter, solid core construction, with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 8 | S& fixed 2nd class hard wood 35 mm thick factory made glazed and skeleton shuttersopen rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 9 | S & F Mild Steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified and directed. |
| 10 | M & F preparing surface of iron and treating small articles such as stop, covers, gully grating, holdfasts, end of posts area exc 0.1 Sqm each complete all as specified and directed. |
| 11 | M & L cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed. |
| 12 | S&F PVC solid door frame of size 50X47mm made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube as specified manufacturers instructions complete all as specified and directed. |
| 13 | S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall becovered with heat moulded Plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rails & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specifications and drawings, complete all as specified and directed. |
| 14 | M&L for preparing new wood and wood based surfaces of any description, over 100mm width or girth and applying two coats of synthetic enamel paint (first quality) over a coat of pink primer, complete all as specified and directed. |
| 15 | M&L for preparing oldwood and wood based surfaces of any description, over 100mm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 16 | M&L preparing old steel and iron surfaces of any descriptions, over 100mm in width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed. |
| 17 | S & F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.all as specified and directed. |
| 18 | S & F mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as specified and directed. |
| 19 | M&L barrel tower bolts stove enamelled black of size 200 mm complete all as specified and directed. |
| 20 | S & F 150 mm aluminium handles, cast type anodised all as specified and directed. |
| 21 | S/F 150mm long aluminium handles, cast type anodised all as specified and directed. |
| 22 | S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 23 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 24 | S&F300 mm Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed. |
| 25 | S&F stainlesssteel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks of mild steel wire staples, fixingetc, complete all as specified and directed. |
| 26 | S&F stainlesssteel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks of mild steel wire staples, fixing and repair etc, complete all as specified and directed. |
| 27 | S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 28 | S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plateetc complete all as specified and directed. |
| 29 | S&F in repair 150mm dia double legged door stopper of aluminium alloy with rubber complete all as specified and directed. |
| 30 | S&F repair in sheet glass tinted 4.0mm thick, selected quality, fixing to aluminium sections as in panel of doors, windows shutters and panelling works with necessary fixing arrangements viz jointing cleats, glazing clips, rubber packing, screws, etc., as required/ordered at Site(s), complete all as specified and directed. |
| 31 | S&F in repairs 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-Charge.Make: Modhi Gold |
| 32 | S&F in repairs 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqmtr each pane complete all as specified and directed. |
| 33 | S&F aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality partly glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete including taking down old unserviceable comprising the following:- (a) Aluminium colour anodised door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per spd. (c) Aluminium colour anodised Top & stile shutter section 95.25x44.45x2.00 mm as per spd. (d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002.Make-Jindal(f) Floor spring Make-Sandhu, (g) Six lever mortice lock brass Make : Godrej/Classic on in each door (h) 12 mm thick particlular board (pre laminated both face) exterior grade ISI Marked(j) Tinted glass/Plain glass (Colour)4 mm thick Make : Saint gobain midgaurd Note : If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-Charge. |
| 34 | S&F for aluminum anodized three track sliding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle lock,etc rubber beading and glazing clips etc using following sections as given in "JINDAL" catalogue including taking down existing old window of any description complete all as specified and directed. |
| 35 | S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old window of any description complete all as sspecified and directed. |
| 36 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, outer ring pivot made of brass, other part made mild steel heavy duty and fixing to aluminium shutters with necessary fittings as required/ ordered at site(s), complete all as specified and directed. |
| 37 | S&F in repair door closer of aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F in repairs aluminium powder coated fixed partition with frame of size 101.6mm x 44.45mmx1.27mm thick and 101.60mmx44.45mmx1.20mm thick with total height 3.20m.The panels shall be made out of 5mm thick plain /tinted(frosted) glass in top & bottom of 12 mm thick both side laminated particle board(i.e 50-50) including door with accessories i.e floorspring, hydraulic door closer, butt hinges, handle tower bolt, necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screw etc including making good to the disturbed portion complete all as specified and directed. |
| 39 | S&Fin repair 12 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on both faces fixed with screws to timber frame work Make : Duro/National |
| 40 | M&L 12 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs all as specified and directed. |
| 41 | M&L 6 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs all as specified and directed. |
| 42 | M & L sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and directed |
| 43 | Resecuring or easing & adjusting, without taking down of shutter in the same opening of any description and size complete all as specified and directed. |
| 44 | M&L 18/19mm thickpre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed. |
| 45 | M&L for plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, exc 13 & not exc 25 sq. cm second class H/W complete all as specified and directed. |
| 46 | M&L cover fillet (lipping) of tempered hard board 40mm wide, 6mm thick and fixing with screw complete all as specified and directed. |
| 47 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) in 30mm complete all as specified and directed. |
| 48 | S&F in repairs 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finish complete all as specified and directed. |
| 49 | S&F in repais 150mm hasp and staple, aluminium anodised,wire type stove enamelled black, including bolt to hinge plate and fixed with screw.complete all as specified and directed. |
| 50 | Dismantlingwall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets |
| 51 | M & L for false ceiling with 4mm thick designer"E" board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size24mm x38mm x 0.7mm cross tee of size24mm x 28mm x 0.7 mm using purpose made members interlocking to each other and with 3mm dia GI wireand making holes etc all as directedincluding two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and MakeE boardGypsum or equivalent approved . |
| 52 | M&L for providing & fixing 12mm thick gypsum board in ceiling (two or three stages if reqd) including GI U-section 50mmx35mmx7mm & edge side GI U-section size 30mmx25mmx15mmx7mm fixed with screw gypsum board and frame grid suspended with soffit cleat to roof slab for hanging 4mm dia GI hanger rod with adjustable level clips, after fixing of gypsum board jonits/junction of gypsum board ceiling to be covered with 50mm to 100mm corner strips, Round at fan & lights, cut for cassette AC indoor unit and light complete all as specified and as per manufacture"s instruction and applying two coats of Luster Paint over 3 mm POP to visible side of gypsum board ceiling shade/tint complete all as specified and directed by Engr-in-Charge |
| 53 | Dismantling boarding, any description in any position with nails complete |
| 54 | M&L 2nd class hardwood clean sawn weather boarding, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed. |
| 55 | S&F 1.25mm thick steel rolling shutters, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in positionas indicated complete push pull or manual type including locking arrangement (safety lever locks mild steel with 4 levers for rolling shutters), two coats of synthetic enamelled paint over a coat of red oxide including taking down old rolling shutter of any description and size complete all as specified and directed. |
| 56 | M&L welding in repairs not exc. 2.5cm in length to old doors for fixing hinges, tower bolt, sliding door bolt, handles, locking system, etc complete all as specified and directed. |
| 57 | S&F fixed in repairs aluminium sheet 0.56 mm thick fixed to door shutters with nails all as specified and directed. |
| 58 | S&F 19/20 mm dia medium weight, aluminium powder coated of choice colouras in drapery rod/ curtain rod all as specified and directed. |
| 59 | S & F aluminium powdercoated brackets, decorative type of colour and design as approved suitable for curtain rods of 19/20mm dia all as specified and directed. |
| 60 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 61 | Dismantling stone slab laid bedded ;and pointed in cement mortar of any description or thickness in floor aprons etc complete all as specified and directed. |
| 62 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 63 | M&L 75mm PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directred |
| 64 | M&L 25mmthick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) and finished even and fair to receive the further treatment complete all as specified and directed. |
| 65 | M&L 75mm PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection complete all as specified and directed. |
| 66 | M&L 100mm thick cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) and finished even and fair without using extra cement) complete all as specified and directed. |
| 67 | M & L forming 12mm thick expansion joint filled with pre formed bitumen filler and top 30mm primed and sealed with sealing compound grade A thickness of concrete slab 100mm complete all as specified and directed. |
| 68 | Finishing the surface of concrete pavements by brooming complete all as specified and directed. |
| 69 | M&L 25mm thick rough dressed lime stone slab flooring , jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed |
| 70 | M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 71 | M&L 20mm thick granite (of any type) work, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 72 | M&L for vitrified tiles of 400x400mm,11 to 12mm thick mat rough finish, breaking strength =1500N, modulas of rupture 38N/mm2, bulk denssity =2.2 per gm/cc, colour resistance to uv light as in parking tiles etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, and make: Johnson and equvilent etc.complete all as specified and directed. |
| 73 | M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6complete all as specified and directed. |
| 74 | M& L rendering 10mm thick cement mortar in 1:4 as inbacking coat complete all as specified and directed |
| 75 | M&Lglazed ceramic coloured tiles in vertical surfaces of size 450x350x7 mm thick set and jointedneat cement slurry incl pointed in white or colourcementto match the shade of tiles, over and inclrendering15mm thick 1:4 complete all as specified and directed. |
| 76 | M&L vitrified ceramic coloured tile8 to 9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floor etc, set and jointed in neat cement sluurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 77 | All as per item No.76 above, but on vertical surface such as skirting , dado etc but including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 78 | M&L double charge full body vitrified (Glazed / Matt finish )coloured tile 8 to 9 mm thick(square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 79 | M&L double charge full body vitrified (Glazed / Matt finish )coloured tile 8 to 9 mm thick(square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in Skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing finish. |
| 80 | S&F in repair stainless steel sink, made out of 1.00 mm thick sheet for kitchen with plug, washer pipe cast iron cantilever brackets, connecting union overall size 495x420mmbowl size 410mm x 330mm x160mm all as specified and directed. Make: Nirali/Diamond/Blue King/Kingston/ |
| 81 | S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete as specified and directed by Engr-in-Charge. |
| 82 | Taking up or down 15 mm bore steel tubing and connnections, including cleaning for refixing orremoval to store. all as specified and directed. |
| 83 | S&F galvanised tubes 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors. |
| 84 | Refixing 15 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors, etc) Note: Serviceable tube obtained from sl item No. 82 shall be reused in this item |
| 85 | Cutting chase, pinning in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chasesfor concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all as directed. |
| 86 | S&F vitreous china squatting pan "Orrisa Pattern" size 580x440mm white with integral foot rest (including flushing cistern) but including flush pipe, trap complete all as specified and directed. |
| 87 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (including fixing bolts, flushing cistern and flush pipe) including provision of flush pipe , plastic seat cover for pedestal pan and cp health faucet including two way angle cock complete all as specified and directed. |
| 88 | S&F in repair vitreous china wash basin, white, flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets, waste coupling and waste pipe including pillar tap and stop cock complete all as specified and directed. |
| 89 | S&F in repair 15mm dia stop valve chromium plated, fancy type, screwed down, high pressure , with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 90 | S&F in repair 15mm brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 91 | Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed. |
| 92 | M&L for pre-cast PCC block masonry type C-1, 1:3:6 using 20mm graded stone aggregate exc 10 cm width and set in CM 1:4 complete all as specified and directed. |
| 93 | M&L walling random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed |
| 94 | All as per item No. 93 above, but except stone complete all as specified and directed. |
| 95 | M&L 15mm thick cement plastering on block/stonemasonry surfaces in CM 1:4 finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 96 | M&L machine cut kota stone slab as in flooring20-25 mm thick over and including 15mm thick (avg thickness) cement screed in CM 1:6 base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing (granite finish) etc complete all as specified and directed. |
| 97 | M&L machine cut kota stone slab as in skirting 20-25mm thick in riser of steps, skirting, dado and pillar inclu 15mm thick (avg thickness) rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing (granite finish) etc complete all as specified and directed. |
| 98 | M&L coloured chequred cement concrete tiles 30cm x 30cm x 25mm thick set pointed with neat cement slurry with grey cement and pigment in floorsover and including 15mm thick screed bed in CM 1:4complete all as specified and directed. |
| 99 | M&L sand filling under floors or in foundation or cushioning below tiles including watering as required. |
| 100 | M & L machine pressed precastconcrete interlockingpaver block with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish, colour shade as decided by Engineer-in-Charge |
| 101 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling old pipe complete all as specified and directed. |
| 102 | S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling old pipe complete all as specified and directed. |
| 103 | S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement complete all as specified and directed |
| 104 | Dismantling water tanks and removing capacity exc 500 & n.exc 1000 ltrs complete all as specified and directed. |
| 105 | S&F For 1000 ltr. capacity rotational moulded polyethylene water storage tankscylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 106 | Dismantling water tanks and removing capacity exc 250 & n.exc 500 ltrs complete all as specified and directed. |
| 107 | S&F For 500 ltr. Capacity rotational moulded polyethylene water storage tankscylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 108 | S&F in repairs loft water storage tank moulded polyethylene of capacity 750 Ltr hoisted and fixed in position including dismantling of existing PVC tank complete all as specified and directed. |
| 109 | S&F For 750 ltr. capacity rotational moulded polyethylene water storage tankscylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 110 | M&L 15mm thick cement plastering on stone masonry surfacesin CM (1:6) finishing surfaces even and fair without using extra cement over and including 10mm thick dubbing out on irregular face of wall in CM 1: 6including taking down existing plastering of any description complete all as specified.complete all as specified and directed. |
| 111 | Dismantling of plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering |
| 112 | S & F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed. |
| 113 | S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed. |
| 114 | S&F Framed work such as roof trusses (framed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde E-250) Quality A complete all as specified and directed., |
| 115 | S&F rolled sections as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc Fe-410-W(Gde E-250) Quality A complete all as specified and directed. |
| 116 | M & L preparationof new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed |
| 117 | Excavating in post holes in hard/ dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 118 | M& L PCC 1:2:4 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 119 | M&L 18/19mm thickPre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed. |
| 120 | Extra over rates of block board or veneered particle board for external teak wood 18/19mmlipping 6mm thick fixed with nails |
| 121 | M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol all as specified and directed. |
| 122 | M&L preparing newly plastered surfaces of wall and applying complete wall with POP/Birla putty for making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge. |
| 123 | M & L for coupled closet (Clover) snow white, size 360x640x685mm, including P or S along with cistern dual flush complete set with soft close plastic seat cover complete as specified and directed including taking down old wash down water closet pan of any description and any size. Make : Jaquar, code SLS-WHT-6851P180PP6E |
| 124 | M&L for preparation of newly plastered surfaces ceilingand applying complete ceiling with 3mm POP/Birla putty for making smooth surface and applying three coats of white wash over a coat of POP/Birla puttyall as specified and directed. |
| 125 | (Applicable for above allitems) |
| 126 | Contractor has to employ skilled/unskilled tradesman with adequate experience & required documents to be submitted to office. |
| 127 | Labour should wear contractors uniform with firm logo, failing which recovery shouldbe made. |
| 128 | Minimum of 02 x teams of each trades shall be available for maint of urgent nature whenever called upon of any trade, failing which recovery will be initiated for not employing adequate labour at site. |
| 129 | Site clearance shall be done by contractor after finishing work and obtain the signature of occupant as the site clearance has done. The same shall be verified and put up before issue of completion certificate |
| 130 | All Scarps will be done with mechanical scaper |
| 131 | Mechanical scaper should be deposit in our store at the time of sample approval |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
