|
| 1 | Operation of 110 KVA D.G. set and maintenance of IEI & electrical installation exists at above said site including replacement of switch, socket, holders, MCB etc. as per inventory enclosed. |
| 2 | Servicingand preventive maintenance of 110 KVA D.G. set i/c supply & replacement of mobile oil, coolant, air filter, diesel filter, oil filter i/c testing, commissioning etc.complete as required. |
| 3 | Supplying & replacement of 12 volt 180 Ah capacity lead acid battery including installation, connection, testing, cartage and rebate of old battery etc. as required. |
| 4 | Supply & replacement of 4 feet long 20 wattelectronic driver LED batten, extruded thermoplastic body i/c connection, testing etc. as required. |
| 5 | Dismentling, rewinding / repairing, greasing of following type ceiling fan / exhaust fan i/c re-installation connection testing etc. complete as reqd. |
| 6 | 48” ceiling fan |
| 7 | 18\" exhaust fan |
| 8 | Supplying & replacement (from deputed labour) of 450mm sweep 1400 rpm (approx) cooler fan motor (copper wound)(3 speed) complete with motor blade & mounting accessories suitable for 18\"/20\" desert cooler, providing & fixing GI nut bolts of suitable size legs, connections, testing etc complete as required. |
| 9 | Supplying & replacement (from deputed labour)body of 18\"/20\" desert cooler having size86 cm X 65 cm X 65 cm (H X B X D) (+3%) made out of 18 SWG GI (sheet tank) & 20 SWG GI grill top front & side louvers with distributor PVC pipe 1/2\" dia wood wool pads control plate with 2 nos. 5 Amp. Switch etc as required. |
| 10 | Supplying & replacement (from deputed labour) of electric power driven cooler pump (submersible type) 1400 rpm (approx) having one meter lead, discharge 5 ltrs /min. (approx) providing G.I.Strip, nut bolts of suitable size for 18\" /20\" cooleretc. as required. |
| 11 | Supply and replecement of following size polyester filled 240 volt capacitor i/c dismantling of defective capacitor and re-fixing of new capacitor inter connection etc. as required. |
| 12 | 2.5 MFD 240 volt for ceiling fan |
| 13 | 4 MFD 240 volt for desert cooler |
| 14 | Paintingof desert cooler of size 18\"/20\" after removing ofrust & cleaning of dust with two coat of synthetic enamel paint of approved colour andnumberingwith Alpha numerical letter of 1\" width on desert cooler etc. as required. |
| 15 | Supplying & replacement (from deputed labour) of following size cable FRLS, ISI mareked. FRLS PVC insulated, copper conductor cable i/c connection, testing etc. as required. |
| 16 | 1.5 Sqmm (Single Core) |
| 17 | 4 Sqmm (Single Core) |
| 18 | S.I.T.C. (from deputed labour)of ceiling fan 1400mm sweep suitable for working at 230 volt 50 Hz. AC supply + 10% pearl white metalic colour in good condition at site etc. as reqd. |
| 19 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 12 way , Double door |
| 20 | Supplying & replacement (from deputed labour) of following items (ISI marked) suitable to operate on 240 volts A.C. supply, testing etc. as reqd. |
| 21 | 5/6Amp. Piano type switch |
| 22 | 15/16Amp. Piano type switch |
| 23 | 5/6Amp. Bell push piano type |
| 24 | 3 pin 5/6Amp. socket outlet piano type |
| 25 | 6 Pin 15/16Amp. Socket outlet piano type |
| 26 | Call bell / buzzer |
| 27 | 6 to 32 Amp. S.P. MCB (C) Curve – 10 KA |
| 28 | 32 AmpDPMCB (C) Curve 10 KA |
| 29 | 4 pole isolator 63A |
| 30 | Rewinding (Copper winding) & repairing of 18/20\" desert cooler fan motor of defferent make 900/1400 rmp testing etc. complete as required. |
| 31 | Supplyig & fixing of cooler stand suitable for 18/20\" desert cooleretc. complete as required. |
| 32 | Supplying & replacement (from deputed labour) of front grill made out of 20 SWG GI sheet suitable for 18\"/20\" desert cooler i/c GI nut bolts screws washer etc after removing the existing grill testing etc as required. |
| 33 | Suppying & replacementof wood wool pad in 18\"/20\" in desert cooler i/c PVC pipe, pad holding wiremesh after cleaning of desert cooler, oiling of motor, etc. as required. |
| 34 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required |
