}

Tender For Certain Repairs To Flooring Panelling Plastering Etc Of B Arty Bde Under Age Br P-1 At Faridkot Mil Stn, faridkot-Punjab

Military Engineer Services-MES has published Tender For Certain Repairs To Flooring Panelling Plastering Etc Of B Arty Bde Under Age Br P-1 At Faridkot Mil Stn. Submission Date for this Tender is 23-06-2023. Civil Work Tenders in faridkot Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

37871096
Corrigendum : Tender For Certain Repairs To Flooring Panelling Plastering Etc Of B Arty Bde Under Age Br P-1 At Faridkot Mil Stn
Open Tender
Indian
Punjab
faridkot
23-06-2023

Tender Details

Certain Repairs To Flooring Panelling Plastering Etc Of B Arty Bde Under Age Br P-1 At Faridkot Mil Stn

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 16-Jun-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 23-06-2023

Key Value

Document Fees
INR 500 /-
EMD
INR 70000.0 /-
Tender Value
INR 35 Lakhs /-

BOQ Items

Name of Work:Certain repairs to flooring,panelling,plastering etc of "B" Arty Bde under AGE B/R (P-1) at Faridkot Mil Stn
Sl. No. Item Description
1Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), racking out joints, hacking for key, scrubbing down with water etc ,removingrubbish off the premises complete all as specified and directed .
2S&F Glazed ceramic light shade coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed
3S&F Non skid light shade coloured ceramic tiles 7 to 8 mm thick (square/rectangular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed .
4S&F Non skid light shade coloured ceramic tiles 7 to 8 mm thick (square/rectangular)area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed
5Dismantling stone slabsof any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed
6Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed
7M&L for 25mm thick,PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregates), as in sub base of flooring ,finishing surfaces even and fair without using extra cement complete all as specified and directed.
8S&F Machine cut kota stone slab in flooring ,20-25mm thicklaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6complete all as specified and directed.
9All as per Ser item No 08 here-in-before but except kota stone
10S&F Machine cut kota stone slab 18-20 mm thick as in skirting,steps,dado,& pillars, set and jointed in cement slurry over & including15 mm thick rendering in cement mortar1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
11All as per Ser item No 10 here-in-before but except kota stone
12M&L for cutting, rubbing and polishing of existing Kota stone flooring complete all as specified and directed.
13M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed .
14M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footpath, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed .
15M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed .
16S&F in repair PVC hollow wall lining interlocking type of 7mm thick plain/coloured /wood grain fitted in to the wall with PVC rawl plug and steel screws including fillets on joints as per manufacturer"s instruction etc.complete all as specified and directed. Note:-Quoted rate of the item deemed to be included for taking down and refixing (as per existing)minor electric fittings and fixtures (if any) on the surface of wall.
17S&F in repair Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet having beading/border on top and on joints inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings all as specified and directed by Engineer-in-Charge Note:-Quoted rate of the item deemed to be included for taking down and refixing (as per existing)minor electric fittings and fixtures (if any) on the surface of wall
18S&F in repair5mm thick PVC Sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and directed .
19S&F in repair Pre painted galvalume aluminium zinc coating GI basedcorrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
20S&F in repair Pre painted galvalume aluminium zinc coating GI basedplain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
21S&F in repairRoof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290- (Gde E -165)complete all as specified and directed
22S&F in repair 7-8mm thick PVC laminated gypsum board as in ceiling fixed with screws as permanufacturer"s instructions, including anodised aluminium snap grid frame work for false ceiling of grid 605x605mm, hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size & length 60mm andexpansion hold fasterners 12.5mm dia,40mm long complete all as specified and directed. Note:-Quoted rate of the item deemed to be included for taking down and refixing (as per existing)minor electric fittings and fixtures (if any) on the surface of ceiling
23S&F in repair 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls includingfixing clamps with nut and boltscomplete all as specified and directed .
24S&F in repairPVC (SWR)bends any radius ,110mm bore complete all as specified and directed.
25Dismantling of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
26M&L for brick work with sub class "B" bricks using old size bricks, straight or curved on plan exceeding 6m mean radius,built in cement mortar 1:6 complete all as specified and directed .
27All as per Srl item No. 26 here-in-before but except bricks.
28M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
29M&L for rendering 15 mm thickin cement mortar 1:4 mixed with WPC on brick work or concrete surfaces finished even and smooth without using extra cementcomplete all as specified and directed . Note:- WPC will be measured and paid separately as supply only
30M&L for rendering 15 mm thick in cement mortar 1:6on brick work or concrete surfaces finished even and smooth without using extra cementcomplete all as specified and directed .
31Supply only integral water proofing compound
32M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer of cement @ 3 Kgper square metre and top layer 15mm thick in cement mortar 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
33M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
34M&L for 5mm thick rough cast plaster over and including 10mm thickrendering in cement mortar 1:4 on fair faces of brick or concrete surface including preparation of surfacesand applying two coats of cement base paint complete all as specified and directed. Note : The rough cast mixture shall consist of crushed stone / fine gravel aggregate, coarse sand & cement in the ratio of 1:1:1 over the rendering coat.
35M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed .
36M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed.
37M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.
38M&L for preparation of newly plastered or unplastered wall surfaces and applying two coats of white wash complete all as specified and directed .
39Taking down old deteriorated concrete /plaster of old surfaces of facia,parapet,slab edges,projection bottom etc& applying 15mm thick rendering in cement mortar 1:3, finishing surfaces even and smooth without using extra cement includingnecessary scaffolding,doubing coat complete all as specified and directed. Note:-Work is to executed in buildings of height upto 15 metres and Quoted rate of the item is deemed toincluded the same.
40Taking down shutter of any description exc 1 sqmbut n.exc 2sqm each & refixing the shutter in same opening including easing and adjusting complete all as specified and directed
41S&F solid PVCdouble door frame of size 50x95mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, edges shall be printed to match printed sheet in openingcomplete all as specified & directed.
42S&F Factory made solid PVC moulded door shutter ,28 to 30mm thick (stiles),with 2, 4 or 6 raised panel design with 2mm thick moulded with woodfree EPS PVC sheet on the front face & 2mm plain colour PVC sheet on back face to be fitted in the MS frame welded/ sealed to the style & rail with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed
43S&FButt hinges 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 (ISI marked)fixed with screws complete all as specified and directed.
44S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.
45S&F aluminium alloy, anodised, sliding door boltof length 250mm with hasp and staple (bolt type) andfixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed.
46S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.
47M&L for Cutting holes into orthrough brick walls built in cement mortar and making good the dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 as required, exc half brick but not exc one brick completeall as specified and directed .
48M&L for welding in repairsexc 2.5 cm but n.exc 5 cm in length in metal of thickness n. exc 6mmcomplete all as specified and directed .
49Taking upor down 15mm dia GI tubing and connection including, cleaning for refixing or removal to storecomplete all as specified and directed .
50Taking upor down 20mm dia GI tubing and connection including, cleaning for refixing or removal to storecomplete all as specified and directed
51S&F Steel water tubing,15mm bore, medium grade,galvanised with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
52S&F Steel water tubing,20mm bore, medium grade,galvanised with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
53S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated with on/off handle, screwed down of iron pipe or for brass ferrule and fixed complete all as specified and directed.
54S&F in repairBrass Chromium plated basin/sink mixer for mixing hot & cold water screwed down for 15mm bore iron pipecomplete all as specified and directed. .
55S&F in repair Stop valve, cast copper alloy,chromium plated, screwed down for high pressurewith crutch or butter fly handle,screwedboth endsfor ironpipe of 15mm bore complete all as specified and directed.
56S&F in repair PVC connection, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
57S&F in repair chromium plated brass health faucet with 1.0mtr tube & hook (braided tube) complete all as specified and directed .
58S&F in repair PVC Knob/Handle (as per sample) suitable for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
59S&F in repairs Jet spray with 1.50 m tube forwash down water closet (pedestal pattern) andfixed complete all as specified and directed .
60S&F in repair vitreous china Wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, pillar taps,fancy type,chromium plated ,cast copper alloy, with capstan head, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed.
61S&F in repair Vitreous china squatting pan, "Orissa" pattern, size 580x440 mm white, with integral foot rests, CI "P" or "S" traps 100mm & PVC flush pipes 32mm diaincluding connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified and directed.
62S&F in repair 10 litres PVC flushing cistern, low level with top push button, white, including brackets & PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed.
63S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed
64S&F600mmx450mm looking mirror of selected glass 5mm thickmounted on6mm thick commercial ply woodwith PVC/ wooden moulding beading fixed to wooden plugs with chromium plated brass screws and cup washers etccomplete all as specified and directed .
65S&F in repairbrass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with CP brass screwsincluding wooden/plastic beads complete all as specified and directed.
66S&F in repair brass chromium plated soap tray, any type, fixed to plugs with chromium plated brass screwscomplete all as specified and directed.
67Raking out joints/pointing in cement mortar to brick work or brick tiles laid flat, in floors, surface channels,roofs etc complete all as specified and directed
68M&L for flush pointing in cement mortar 1:3in pavings in floors, roofs, aprons, surface channel etc complete all as specified and directed .
69Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material to a distance n.exc 100m from the starting point completeall as specified andspecified
70M&L 40mm thick brick tiles laid on lime concrete and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cementover & including 15 mm thick screed in cement mortar 1:6 completeall as specified and directed .
71All as per Srl item No. 70 here-in-before but except brick tiles.
72Taking down of chowkats or frames exc 1.5 Sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
73M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in roof kerbs or mud stops, rounded or chamfered anglescomplete all as specified and directed. Note :-A Sum of Rs. 32,555.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 22(Schedule of credit) of Tender Documents.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail