}

Tender For Repair / Replacement To Floor, Joinery, Walls, Tiles, Sanitary / Water Supply Fittings And Allied Works In Zone Vii Under Age B/R-I Of Ge (West) Bareilly., bareilly-Uttar Pradesh

Military Engineer Services-MES has published Tender For Repair / Replacement To Floor, Joinery, Walls, Tiles, Sanitary / Water Supply Fittings And Allied Works In Zone Vii Under Age B/R-I Of Ge (West) Bareilly.. Submission Date for this Tender is 14-06-2023. Pipe and Tube Fittings Tenders in bareilly Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

37870772
Tender For Repair / Replacement To Floor, Joinery, Walls, Tiles, Sanitary / Water Supply Fittings And Allied Works In Zone Vii Under Age B/R-I Of Ge (West) Bareilly.
Open Tender
Indian
Uttar Pradesh
bareilly
14-06-2023

Tender Details

Repair / Replacement To Floor, Joinery, Walls, Tiles, Sanitary / Water Supply Fittings And Allied Works In Zone Vii Under Age B/R-I Of Ge (West) Bareilly.

Key Value

Document Fees
INR 500 /-
EMD
INR 98000.0 /-
Tender Value
INR 49 Lakhs /-

BOQ Items

NAME OF WORK: REPAIR / REPLACEMENT TO FLOOR, JOINERY, WALLS, TILES, SANITARY / WATER SUPPLY FITTINGS AND ALLIED WORKS IN ZONE VII UNDER AGE B/R-I OF GE (WEST) BAREILLY.
Sl. No. Item Description
1Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.
2Demolition of brick work or stone / bouldermasonry includingall quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.
3M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
4Taking down Chowkats or frames with shutters (Without taking off shutters from the frames)exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and making good the disturbed portions of walls in Cement Mortar 1:4 complete all as specified and directed.
5Taking down Chowkats or frames with shutters (Without taking off shutters from the frames)not exceeding 1.5 Sqm each including iron mongries, hold fast etc and making good the disturbed portions of walls in Cement Mortar 1:4 complete all as specified and directed.
6Taking down shutter of any description exceeding 1Sqm but not exceeding 2 Sqm each complete all as specified and directed.
7Taking down shutter of any description not exceeding 1Sqm each complete all as specified and directed.
8S & F of 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc. complete all as specified and directed. Note : 10 mm deformed bar shall be provided in bottom portion in each frame. The rate for the same is included in rate quoted against this item.
9M & L for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
10S & F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed.
11S & F of 35 mm thick (Batten thickness) 2nd class hardwood (SAL) plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of 12 mm thick veneered particle board medium density, wood particle board with commercial face veneers and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.
12S & F of 35 mm thick (Batten thickness) 2nd class hardwood (SAL) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.
13S & F of 100 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
14S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
15S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.
16S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
17Taking down old steel window with side hung shutters including projecting or boxtype hinges, steel handle and steel peg stay and refixing in same opening after necessary repair, welding and replacing damaged / missing part and making good dismantled portion of walls including PCC bed block and rendering on jambs / cill / soffit etc. complete all as specified and directed.
18S & F of factory made steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded with and including taking down old unserviceable one complete all as specified and directed.
19S & F of factory made steel ventilator with top hung shutter including hinges, steel peg stay with and including taking down old unserviceable one complete all as specified and directed.
20S & F in repairsMild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.
21M & L for factory made steel window box type using ERW "P" section comprising double frame for gauged and glazed skeleton shutter, jointed internally with flat iron 40x3 mm complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing complete all as specified and directed. NOTE- For the purpose of measurement & payment double shutter with frame shall be considered as one unit. Unit rate quoted against this item shall also include the iron mongry as required. Guard bars, sheet glass and wire mesh shall be measured and paid separately under respective items of this schedule.
22Hacking out old broken glass (any thickness, size, qualityor description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins / spring clips complete allas specified and directed.
23S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
24S & F of galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.
25S & F in repairs galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.
26S & F of mild steel frame consisting of wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm, fixed on steel frame made up of mild steel flat iron 20x3 mm after drilling out old rivets and flat iron strips and replacing with new 20 x 3 mm mild steel flat iron strip and new rivets including necessary welding and painting of fillets to match with existing work and fixed with stainless steel wire staples fixed as in repairs in wooden frames complete all as specified and directed.
27S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed.
28S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded wood grain printed PVC "C" channel having a PVC sheet beading of size 15 mm X 5 mm thick stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with decorative PVC beading of size 10 mm X 10 mm (900) and joined together with solvent cement as per specification and drawinggiven on MES schedule Part – II (2020) complete all as specified and directed.
29S & F of 100 mm long medium weight, stainless steel Butt hinges with screws complete all as specified and directed.
30S & F of rubber beading suitable for door shutter of required size complete all as specified and directed.
31S & F of 0.56 mm thick plain Aluminium sheeting, Alloy 31000 H4 in drip and straight flashing and in coverings of door shutter complete all as specified and directed.
32Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
33M & L for rendering 15 mm thick cement plaster on other than fair faces of brick work or stone masonry surfaces with cement mortar 1:6 finished even and fair complete all as specified and directed.
34M & L for rendering 10 mm thick cement plaster on cement concrete surfaces of ceiling with cement mortar 1:4 finished even and fair complete all as specified and directed.
35M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
36M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
37M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
38M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a thin coat of wall care putty and a coat of primer complete all as specified and directed.
39M & L for preparation of old decorated surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed.
40M & L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.
41M & L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
42M & L for preparation of old decorated surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
43M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
44M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
45M & L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
46M & L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
47M & L for providing 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm thick graded stone aggregate) as in floor and finishing top surface even and smooth with using extra cement complete all as specified and directed.
48Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar complete all as specified and directed.
49M & L for vitrified ceramic coloured superior quality tiles (light shade)10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tilescomplete all as specified and directed.
50M & L for vitrified ceramic coloured superior quality tiles (light shade)10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.
51M & L for glazed ceramic coloured tiles 300 mm X 200 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed.
52M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.
53M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.
54M & L for 15 to 18 mm thick granite stone slab of any shade including grinding / moulding and polishing fixed over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
55M & L for 15 to 18 mm thick Z-Black granite stone slab including grinding / moulding and polishing fixed over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
56M & L for 15 to 18 mm thick Z-Black granite stone slab as in skirting, dadoand the like laid over and including 10 mm thick cement screed in cement mortar 1:4, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of slab including grinding / moulding and polishing complete all as specified and directed.
57M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.
58S & F of 25 mm dia mild steel fancy type vista pattern curtain rod of approved finish (Superior quality) including fancy type knobs at both ends, bracket for supports complete all as specified and directed.
59S & F in repairs vitreous china squatting pan "Orrissa" pattern of size 580 X 440 mm whitewith integral foot rests excluding flushing cistern but including connection to trap and cistern, flush pipe and making good the disturbed surface of floor complete all as specified and directed.
60S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white, with "P" or "S" trap including connection to trap and cistern and flush pipe excluding flushing cistern but including PVC white seat cover, closed pattern fixed with aluminium hinging device and making good to disturbed surface of floor complete all as specified and directed.
61S & F in repairs PVC low level flushing cistern of 10 Litres capacity including syphon float valve and rubber cone etc. complete all as specified and directed.
62S & Fin repairs 15 mm bore fancy type, chromium plated stop valve, with long shank and cup (Concealed Type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
63S & F of 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.
64S & F in repairs vitreous china wash basin white flat back type of size 550x400 mm including cutting for and pinning in ends of brackets and 32 mm dia chromium plated waste coupling complete all as specified and directed.
65S & F in repairs 600 mm X 450 mm X 5.5 mm thickbeveled edge looking mirror of selected quality glass mounted on 6 mm thick AC Building board or commercial plywood with and including aluminium edging alround of mirror and fixed to wall with PVC rawl plugs with chromium plated brass screw complete all as specified and directed.
66S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cementmortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 1140 mm x 510 bowl size 560 mm x 405 mm x 160 mm fixed complete all as specified and directed.
67S & F in repairs 20 mm dia brass chromium plated tubular towel rail ‘D’ type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.
68S & F in repairs 15 mm bore bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
69S & F in repair 15 mmdia brass chromium plated , pillar taps fancy type, cast copper alloywith capstan heads screwed down high pressure screwed for iron pipe with or without lettered "Hot"or "Cold"with long screwed shanks and fly nutsor as specified or as directed.
70S & F in repairs 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
71S & F in repairs 32 mm dia PVC waste pipe suitable for wash hand bason complete all as specified and directed.
72Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting exc. 10 cm & not exc. 20 cm in girth complete all as specified and directed.
73Taking up or down 15 mm bore steel water tubing and connection complete all as specified and directed.
74Taking up or down 20 mm bore steel water tubing and connection complete all as specified and directed.
75S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
76S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
77Disconnecting existing tank exc. 250 Litre but not exc. 500 Litre capacity, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position (cleaning, repairing etc. to be measured separately) complete all as specified and directed.
78Disconnecting existing tank exc. 500 Litre but not exc. 1000 Litre capacity, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position (cleaning, repairing etc. to be measured separately) complete all as specified and directed.
79Dismantling of water tank exc. 250 Litre but not exc. 500 Litre capacity complete all as specified and directed.
80S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part-I and hoisted, fixed in position complete all as specified and directed.
81S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.
82M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
83M & L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed.
84M & L for rubber moulded coloured chequered cement concrete tiles 20 cm X 20 cm X 25 mm thick, set, jointed and pointed in neat cement slurry as in floors over and including screed bed 20 mm thick in Cement Mortar 1:6 complete all as specified and directed.
85M & L for rubber moulded 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and including 25 mm thick sand cushioning, filling of joints with sand complete all as specified and directed.
86S& F of 4 mm thick plain glass sheets ordinary quality in squares exc. 0.50 sqm each pane fixed with rubber beading for aluminium window, doors and the like complete all as specified and directed.
87S & F of rubber beading suitable for fixing of 4 mm / 5 mm thick glass pane in aluminium window, doors complete all as specified and directed.
88S & F in repairs aluminium anodized Deco grill of design DG 104 pattern made out of 10 mm dia rod fixed with and including standard aluminium frame of F section of size 23.40 mm x 15.30 mm and 1.4 mm thick all as per manufactures instructions complete all specified and directed.
89S & F of aluminium door with fame and shutter, made out of powder coated (Minimum 25 micron thick) extruded aluminium sections fixed with or without ventilator on top with and including powder coated aluminium butt hinges, tower bolt, glazing clips, locking arrangement, snap beading, handles, rubber beading and connected items with and including making good to the disturbed portion with its original specifications complete all as specified and directed.
90S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
91S & F in repairs 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
92S & F of double action heavy duty floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass and other parts made of mild steel complete all as specified and directed.
93S & F in repairs Aluminium extruded section body door closer hydraulically regulated designation No. 2, universal type suitable for door shutter701 to 800 mm in width and 36 to 60 Kg in weight complete all as specified and directed.
94S & F of Aluminium extruded section body door closer hydraulically regulated designation No. 2, universal type suitable for door shutter701 to 800 mm in width and 36 to 60 Kg in weight complete all as specified and directed.
95Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed.
96S & F of false ceiling with 24 mm grid system of grid size 600x600 mm suitable for 8 mm to 14 mm thick ceiling board, grid shall be suspended from ceiling using 4 mm dia pre-straighten GI wire with 6 mm nylon rawl plug and screws at 1200 mm intervals complete all as permanufacturers instructions and as directed. MAKE- Saint Gobin, Gyproc, Armstrong.
97S & F in repairs12 mm thick ceiling board of size 600 mm x 600 mm suitable for false ceiling complete all as specified and directed.
98S & F of Hangers made of 6 mm dia GI wire (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made of GI flat 40 X 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed.
99S & F of anodised aluminium snap grid frame work, size of grid 605 mm X 605 mm for false ceiling complete all as specified and directed.
100S & F of 4 mm thick asbestos cement plain building board, fixed to timber frame work with screws as in ceiling complete all as specified and directed.
101Note :- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail