|
| 1 | Dismantling of old burnt APFC panel of any capacity and Supply, install & testing commissioning of APFC panel of capacity 150 KVAR with relay 05step auto operation suitable for improving PF upto unity including outdoor type made out of 3 mm thick CRCA sheet with channel /angel iron pedestal frame compartmental type dustfree vermin proof IP 52 protection cable alley cable entry hole at the bottom and mounting on PCC (1:3:6) platform raised at 30 CM above ground level with the following accessories:- |
| 2 | (a) Incomer MCCB 4 pole 415 volts with adjustable type 250 Amps with breaking capacity 36KA complete -01 Nos (b) Bus bar aluminium of suitable capacity for phase & neutral -01 set , (c) Capacitor duty contactor of MOC type required capacity -01 Nos (for each capacitor bank) (d) Digital microprocessor based power factor correction relay of 6 step operation suitable for 150 KVAR capacity of APFC panel -01 Nos, (e) 150 KVAR capacitor bank consisting of 6 steps of operation including of capacitors of voltage 415 Volt long life ultra heavy duty LTXL type 2 x 12.5 KVAR + 3 x 25 KVAR +1 x 50 KVAR with suitable MCCB as backup protection. (f) Digital ameter with selector swtich and CTs of suitable capacity, (g) Digital voltmeter with selector swtich of suitable capacity, (h) Internal power & controlwiring with suitable size of PVC insulated copper wire and LED indicating lamps complete all as specified & as directed by Engr-in-Charge. |
| 3 | Dismantling of old burnt LT panel of any capacityand Supply , install & testing commissioning of LT panelKIOSK type cubical weather dust and vermin proof (out door type) CPRI approved factory made suitable for operation on 1100 Volts 3 phase, 4 wire 50 HZ AC electric supply externally powder coated & internally painted with two coats of synthetic enamel paints over one coat of red oxide primer made out of 3 MM thick CRCA steel sheet of size having opening and locking arrangement both from front & back side with cable tray of size ot less than 20 CM including copper busbar size 50 x 10 MM fixing on angel ironsize of 50 x 50 x 6 mm including connected accessories and necessary PCC work 1:3:6 type C-2 blocks complete with following accessories :- |
| 4 | (a) MCCB 400 Amps, 4 pole, 36 KA, adjustable thermal and fixed magnetic setting -01 No (Incoming), (b) MCCB 250 Amps, 4 pole 35 KA fixed thermal and fixed magnetic setting -02 Nos (Outgoing), (c) MCCB 160 Amps, 4 pole 25 KAfixed magnetic thermal and fixed magnetic setting-01 No (Outgoing), (d) MCCB 100 Amps, 4 pole 25 KAfixed magnetic thermal and fixed magnetic setting-01 No (Outgoing), (e) S & Fix multi function digital meter with LCD display incl PT & CT having CTR 50/5 (Parameters :- V, A, F, PF, KW, KWA, KWH, KVAH, KVARH)- 01 Nos, (f) Indicators with neon lamp with RYB shade, 240 Volts 50 C/s of suitable capacity resistance -01 set, (g) Internal wiring with suitable size PVC insulated single core copper connnecting instruments-01 lot, |
| 5 | M&L forearthing with GI earth plate electrode ofsize 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full lenght of earth plate,40mm dia GI tubing light grade protection pipe upto test point, 20mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30X30cm made of RCC 1:3:6 with suitable handle, angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate and filling of vegetable soil to the remaining 10%,removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as specified in plate No 3 of SSR Part-I and directed by Engr-In-Charge. |
| 6 | M & L for LT heat hrinkable cable jointing kit suitable for 3.5 Core 70 to 150 Sq MM aluminium cable complete all as specified and as directed. |
| 7 | M & L for LT heat hrinkable cable jointing kit suitable for 3.5 Core 185 to 300 Sq MM aluminium cable complete all as specified and as directed. |
| 8 | Supply and fix in repairs Galvanised Iron cross arms channel, bracing, support, clamps etc fabricated structural steel, sections, including nuts, bolts, washers etc and cutting to required length bent to any shape drilling holes, fixed on poles or jointed by means of electric arc welding complete including taking down / dismantling the old items complete in any sub station / installations structure complete all as specified and as directed. At Sunset park road side four pole structure and Varunapuri sub stn. |
| 9 | M&L for ACSR Conductor as per required side for LT/HT connection / distribution line complete all as specified and as directed. |
| 10 | Supply only the ready to use materials for repairing pot holes in flexible rods (bitumen roads) modified all weather bitumen paste in liquid asphalt with chemicals antistripping agents, graded aggregates and additives can be used in temp in the range of0 to 50 degree celescius make of STP/SIKA/FOSROC or as equivalent complete all as specified and as directed. |
| 11 | Replacement ofACSR type jumpers(appx 1.5 RM in length) of suitable dia including aluminium lugs of suitable size for HT structures and yards including PVC insulationpipe and cleaning of carbon deposited on joints, applying jelly to each contact points and GOD male & female contactsand dismantling old jumpers complete all as specified and as directed. |
| 12 | Supply & Fix including taking down old unserviceable Air Circuit Breaker with new air circuit breaker of capacity 4 pole 415 V electrical drawout type of capacity 800 Amps 3 phase 4 wire 415 V electric supply with rated current of over current trip device of 800 Amp rated ultimate breaking / making capacity of 50 KA and rated service breaking/making capacity of 45 KA with thermal magnetic release complete all as specified and as directed. |
| 13 | S & Fix of MCCB 3 pole, 415 V, fixed type400 Amps breaking capacity 36 KA complete all as specified and as directed. |
| 14 | S & Fix of MCCB 3 pole, 415 V, fixed type250 Amps breaking capacity 36 KA complete all as specified and as directed. |
| 15 | Taking down street light fitting for repairing / servicing / replacement / cleaning of any wattage completely removing dead insect, dust and refixing again to same location. Note:- Replacement of accessories like driver will be measured & paid seperately. |
| 16 | Supply only LED driver unit for LED street light luminiare 72W complete all as specified and as directed. |
| 17 | S & Fix in repairs LED driver unit for LED street light luminiare 60W complete all as specified and as directed. |
| 18 | S & Fix in repairs LED driver unit for LED street light luminiare 90W complete all as specified and as directed. |
| 19 | S & Fix in repairs LED driver unit for LED street light luminiare 120W complete all as specified and as directed. |
| 20 | S & Fix in repairs LED driver unit for LED flood light luminiare 100W complete all as specified and as directed. |
| 21 | S & Fix in repairs LED driver unit for LED post top lanternluminaire 25W complete all as specified and as directed. |
| 22 | 20. S & Fix in repairs LED driver unit for LED street light luminiare 100W complete all as specified and as directed. |
| 23 | Taking down old unserviceable street lights, Supply & Fixin repair 25W LEDSmart Integrated Solar Street Light with Built in Mono Crystalline Panel, Lithium Ferro Phospate (LiFeP0 4) Battery, MPPT Charge Controller and PIR Sensor with Colour Temperature 6000-6500K. Solar Standalone Streetlight Systemof 2 days backupconsists of Solar LED Luminiare, Solar Panel, Solar maintenence Free Battery including and 6 Mtr long GI Pole complete all as specified and direceted. Make: Bajaj, Model - 25W Aii-in-One Standared or equivalent in Philips /Havells/ Tata. Note:- Cost of suitable concrete foundation including necessary earth work in soil / soft disintrgrated rock, PCC 1:4:8 D2 filling in foundation concrete PCC 1:3:6 type C1 copping concrete etc. for fixing the street light pole shall be deemed to be include in the quoted rate. (Rate of 6 mtr GI pole including PCC foundation & installation @ 5000 + 1500.00= 6500.00 Rs) Total Basic price of solar smart integrated street light including pole 6 mtr and installation- 49500.00 + 6500.00 = 74000.00 Rs. |
| 24 | Repair /replacement of old unserviceable flood lights LED type 50 watt 230 Volts AC outdoor type secondary optics , aluminium pressure die cast housing with IP 66 4 KV inbuilt surge protection efficay 120 lm/W 5700 K Make :- Bajaj Cat No:- BJFL 50 W LED I complete with driver complete all as specified and as directed. |
| 25 | S & F in repairjunction boxes IP 66/69 protected out door type size 155 x 210 x 92 mm |
| 26 | Repair /replacement of old post top lanternLED type 60 watt 230 Volts Ac outdoor type with led post top made in die-cast aluminium housing with decorative clear and opal arcylic diffuser with IP 65 protection and corrosion resistant complete with driver and lamp complete including decorative cast street lighting post of size 4 mtr heightCAT PT No:- BCF FLO 60W LED NW OP PT, CCT-4000KModel FLOUNCE OR EQUIVALENT in CG, Philips, Havells, Luker etc. |
| 27 | Repair /replacement of old post top lanternLED type 40 watt 230 Volts Ac outdoor type made in die cast aluminiumwith innovative glare free indirect lighting distribution & IP 65 protection CAT Pt No:- BRIL 40 Watt LED WW 3000Kwith inmpact and corrosion resistant complete all as specified and as directed. |
| 28 | Repair /replacement of unserviceable neon strip ight VT 2835 120 in color warm white, purple, pink, red ice blue and input voltage DC 12 VLED/Mtr 120 LED/Mtr IP 65 Current /M 1.0 A wattage 9/12Watt size 6 x 12 MM cut size 2.5 CM/Cut length 50 Mtr/Roll for all weather resistant complete with driver. |
| 29 | M & L for XLPE insulated , armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross sectional area 16 Sqmm4 core complete all as specified and as directed. |
| 30 | Excavation in trenches 1.5 Mtr wide and not exc 1.5 Mtr deep in hard / dense soil getting out and levelling of bottom surface to required level for laying UG cable / errection of poles complete all as specified and as directed. |
| 31 | Returning filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 32 | Removal of surplus soil excavated material to a distance not exceeding 50 mtr & deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed. |
| 33 | Supplying & Layingprecast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm in trenches for protect to under ground cable complete complete all as specified and as directed. |
| 34 | Supplying & Laying in trenches Clear Sand for cushioningunder ground cable 8 cm below and 15 cm above complete in level complete all as specified and as directed.Note: Punned thickness only will be measured and paid. |
