Public Health Engineer Organisation has published Tender For Improvement Of Water Supply To Athagarh Nac Including Om For 5 Years Under Amrut 2.0, Swap-I. Submission Date for this Tender is 21-06-2023. Electrification Work Tenders in cuttack Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Improvement of water supply of Athagarh NAC for upgradation to 24 x 7 water supply System. |
| 2 | Poviding and making gabion structure with mechanically woven double twisted hexagonal shaped. Wire mesh gabion boxes as per IS:16014:2012, Morth clause 2500 of required size, mesh type 10 x 12(d)=100 mm with tolerance of +/- 2%), Zinc +10%. Alloy+PVC edged/ selvedged with partitions at every 1.0 m interval and shall have min. 10 no"s of opening per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2 mm(ID/OD) Supplied @3% by weight of the gabion boxes, filled with boulders with least dimensions of 200 mm as per drawing, all complete as per direction of Engineer-in-Charge. |
| 3 | RAW WATER PUMPING MAINS (200 mm to 400 mm Diameter) |
| 4 | Dismantlingofcementconcretepavementbymechanicalmeansusingpneumatictools, breakingtopiecesnotexceeding0.02cuminvolumeandstockpilingatdesignated locationsanddisposalofdismantledmaterialsuptoaleadof1000metres,stacking serviceable and unserviceable materials separately |
| 5 | Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of alllabour, T & P etc. all complete as per the direction of engineer-in-charge. |
| 6 | Cutting metalledroad of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of alllabour, T & P etc. all complete as per the direction of engineer-in-charge. |
| 7 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 8 | LayingintrenchesCENTRIFUGALLYCAST(SPUN)DUCTILEIRON PRESSURE,SOCKET&SPIGOTPIPES,CLASS-K9WITHOUT CEMENT MORTAR LINING conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasketjointing..,asperthespecification,allcompleteasper direction of engineer-in-charge (Earth work in trenches jointing of pipesspecialsandfittingtobemeausredseparately)(Including cost with labour) |
| 9 | 300mm dia DI Pipe(K-9) |
| 10 | Supplying all materials, labour and T&P for Providing Push-on-joints confirmingtoIS:3114tocentrifugally(Spun)CastIronPipesor Ductile Iron pipes using rubber gasket conformingto IS:5382of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all completeasperspecificationanddirectionofEngineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.[excluding cost of rubber gasket] |
| 11 | 300mm dia Push-on-joints |
| 12 | Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the followingdiameterasperP.H.specificationsincludingcarriageof materialsfromstoretoworksiteetccomplete.(excludingearth work in excavation,jointing and cost of specials) |
| 13 | Fixing cast ironDI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel)for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK |
| 14 | 300mm dia D/F Sluice Valve (PN1.6) |
| 15 | Supplying all materials, labour, and making flanged joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete. |
| 16 | 300mm dia D/F Sluice Valve (PN1.6) |
| 17 | Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipeas per specifications including testing with cost of all jointing materials, transportation to site etc. all completeas per the specifications and directions of Engineer-in-charge. |
| 18 | 300mm dia MJ Socket |
| 19 | Supplying all labour, T&P materials etc.and constructingbrick masonry sluice valve chamber of following internal sizes :earthworkinexcavationinallkindsofsoil; layingof150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm sizemetal; 250mm thick brickmasonryworkinC.M(1:4)with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thickcementplasteringwithCM(1:3)withpunning for inside surfaces & out side plastering above GL & cement pointingbelow GL etc.all complete including precastFactorymadeHeavyduty RCC cover slab with Frame ( SD-20) made out of M30 concrete to withstandagainst20MTvehicularload aspertheapproved drawing if any and the direction of Engineer-in-charge. 1.20m x 1.20m x 1.20 m ( deep) |
| 20 | Supplyingfillinginfoundation&plinthwithsandwellwatered& rammed including cost, conveyance, royalties, taxes all labour, T&P etc. all complete as per specification and direction of Engineer-in-charge. |
| 21 | Providing cement concrete(1:3:6) with 40mm size CBHGmetal includingcostofallmaterials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge. |
| 22 | Supplying all materials, labourT & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge. |
| 23 | Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete. |
| 24 | Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC. |
| 25 | Supplying all materials Labour& T&Pfor Fixing of Tamper proof Air Valvefor water works purposes conforming to IS specification for the followingnominal diameters as per specificationcomplete including cost of Air valve. (VAG /Talis Make) |
| 26 | 100mm dia Tamper proof Duojet Air Valve |
| 27 | 4.0 MLD WTP |
| 28 | Design, Drawing, Construction, Commissioning & testing of 4.0 MLD Conventional WTP with Cascade aerator, Raw water channel, Chemical house, Chemical store,Dosing Arrangement/Cholorinator/ Flash Mixer/ Rapidmix/ HBCF/ Settling Tank/RGF-Clariflocculator, bye pass channel, filter house with back wash arrangement with pump, CWR, Clear water pump house, Lab, Administrative Block,internal Road & lighting, Internal Drainage Arrangement, Internal Electrification/Arboriculture etc., all complete as per direction of Engineer-in-Charge. |
| 29 | RCC framed Boundary Wall at 4.0 MLD WTP - 400 Mtrs. |
| 30 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 31 | Supplying all materials labour & T & P for cement concrete 1:3:6 using 40mm size hard black granite metal including watering curing etc. complete. |
| 32 | Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge. |
| 33 | Supplying all materials, labour and T&P for Transportation ofexcavated material & disposingupto 10KM from work site including loading, unloading & stacking, supplying of all labours, tools & plants etc. all complete as per specification and direction of Engineer-in-charge. |
| 34 | Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shutteringwith all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge. |
| 35 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentt in cement mortar (1:6) in Superstructure . |
| 36 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantlingthen after castingincluding cost of materials all complete. (R.C.C. Beams, Column, Grider and Bressmer, etc. in Ground Floor) |
| 37 | Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shutteringwith all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge. |
| 38 | Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge. |
| 39 | Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:4) for brick work including curing scafolding etc. complete. |
| 40 | Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:6) for brick work including curing scafolding etc. complete. |
| 41 | Supplying all materials labour T&P for providing M.S. Grill gate made out of different size Square bar, Flat, Angle, Chanelas per following size as per specification all complete. (Size - Double Leafed 6m x 1.8m height - 1 No. & Single Leafed 1.5m x 1.8m height - 1 No.) |
| 42 | Providing & fixing Concertina Coil fencing with punched tape concertina coil 600mm dia 10.0 Mtr openable length (total length 90m), having 50 nos rounds per 6m length, upto 3m height of wall with existing angle iron "U" shaped placed 2.40mapart and with 10 horizontal R.B.T. reinforced barbed wire stud tied with GI staples & GI clips to retain including all cost of materials, labour, transportation etc, all complete as per specification and direction of Engineer-in-charge. |
| 43 | Providing wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes& putty including cost, conveyance, royalities etc, all complete. |
| 44 | Supplying all materials , labour & T & P for Painting of M.S. pipe, Gate, Door & windows with 2 coats of enamel paint over a coat ofprimerincludingcost of all labour, materials with all taxes, lead ,T&P etc all complete. |
| 45 | Lighting Work of Approach Road at 4.0 MLD WTP |
| 46 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 47 | Supplying all materials labour & T & P for cement concrete 1:3:6 using 40mm size hard black granite metal including watering curing etc. complete. |
| 48 | Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge. |
| 49 | Supplying all materials, labour and T&P for Transportation ofexcavated material & disposingupto 10KM from work site including loading, unloading & stacking, supplying of all labours, tools & plants etc. all complete as per specification and direction of Engineer-in-charge. |
| 50 | Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shutteringwith all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge. |
| 51 | Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge. |
| 52 | Supply, Installation, Testing Wiring & Commissioningof Lighting Distribution Panel Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium Bus Bar and interconnection with copper wire and lugs.Having63A 4P MCB-1 Nos,32A FP MCB-2 Nos, 32A DP MCB-1 Nos, 16A DP MCB-3Nos, 10A DP MCB-1Nos,All switchgear and controlgear make- Siemens, chneider, ABB, L&T, LEGRAND. All completed asper electrical specification and as per direction of EIC. |
| 53 | Supply fitting fixing & errection of Hot dip octagonal smart pole for mounting and installation of the LED street light Luminaries as per following technical specifications - (i) Height - 6.00 mtr (ii) Top dis - 70 mm (iii) Bottom dia -130mm (iv) Sheet thichness - 3 mm (v) Base plate dimension - 200 mm x 200mm x 12mm with required bolt & fittings For yard lighting for Approach Road. |
| 54 | Supplying fitting & fixing of Single arm Bracket of 1.0 mtr lengthsuitable for fixing in 70mm top yard lighting octagonal smart pole |
| 55 | Supplying all materials labour & T & P for fitting & fixing of the following electrical installations / power supply cable including earth work excavation etc. complete as per direction of Engineer in charge. |
| 56 | Cable junction boxes IP66/69 weather proof for outdoor installation of size 104mm x 104mm x 70 mm (with knockouts for cable entry - Black colour) Preferable Hensel make Cat No. KF 0404B) |
| 57 | Connector suitable for 4sqmm |
| 58 | 2.50 Sqmm 4 core copper armoured Cable including laying |
| 59 | Supplying fitting & fixing of 32 mm dia GI pipe of 1.0m long duly welded with MS plate as base plate& making hole in the base plate for fixing of anchor bolt including cost of anchor bolt etc. Complete. |
| 60 | Supply fitting & fixing of energy saving & envoirnmental friendly long life pressure die cast housing with toughened glass& with option of secondary optic with IP66 protection 50 Wt LED light .(Preferable HALONIXmake Freedom LUNOS - SUPER l Cat No.HLSLD-15-45-CWL-R) |
| 61 | Supply fitting & fixing of following materials for Yard Lightingarrangement inside Pumping station campus etc complete.. |
| 62 | 19 mmService Cable Gland |
| 63 | 2.5 mm copper cablesocket |
| 64 | RCC Approach Road 4.0 M Width & 50 Mtrs. Length to 4.0 MLD WTP |
| 65 | Supplying all materials, labour, T&P and filling of road surface with borrow earth (1.0 mtr.) from the approved quarry and compacting to the requireddensity with testing including cost of royalty, lead & transportation & labour cess etc all complete as per the direction of Engineer-in-charge. |
| 66 | Supplying moorum for sub base of road (150 mm Compacted) at work site from the approved quarry including cost of all materials, taxes, royalty, conveyance & labour cess etc all complete. |
| 67 | Supplying all labour, T&P and Laying of sub base of road in layers not exceeding 100mm. Wattering and compacting to the required density with testingincluding cost of roayality, lead & transportation etc all complete. |
| 68 | Supplying 4cm size hard granite metal forroad work at work site including cost of all labour, T& P etc all complete |
| 69 | Supplying all labour, T&P and Spreading metals and packing the voids with small stone & hand packing to proper camber including conveying & spreading of filler materials and filling the interstics by spreading the same over the surface, watering and consolidation with P.R.R |
| 70 | Supplying all materials, labour, T&P and providing rough stone dry packing in approns and revetment with hard granite stone including cost of all materials, taxes, conveyance of all materials to work site, labour cess etc all completeas per specification and direction of Engineer-in-charge. |
| 71 | P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete in all respecte as per Scope & Technical Specification &direction of Engineer-in-Charge. |
| 72 | R.C.C. M-20 Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator with proper cambering and filling berm by excavated earth and all leads and lifts including frame works etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN &direction of Engineer-in-Charge.(In foundation & plinth) |
| 73 | Rigid & smooth centering & shuttering for R.C.C. works including false work & dismantling them after casting including cost of materials, etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN &direction of Engineer-in-Charge. (RCC Foundation) |
| 74 | Providing skin reinforcement for road work using HYSD reinforcementincluding bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P, etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN &direction of Engineer-in-Charge. [8mm tor @ 300 mm x 300 mm] |
| 75 | Clear Water Pumping Mains (Replaced & Proposed) |
| 76 | Dismantlingofcementconcretepavementbymechanicalmeansusingpneumatictools, breakingtopiecesnotexceeding0.02cuminvolumeandstockpilingatdesignated locationsanddisposalofdismantledmaterialsuptoaleadof1000metres,stacking serviceable and unserviceable materials separately |
| 77 | Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of alllabour, T & P etc. all complete as per the direction of engineer-in-charge. |
| 78 | Cutting metalledroad of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of alllabour, T & P etc. all complete as per the direction of engineer-in-charge. |
| 79 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 80 | Supplying all material, labour and T&P for LayingintrenchesCENTRIFUGALLYCAST(SPUN)DUCTILEIRON PRESSURE,SOCKET&SPIGOTPIPES,CLASS-K9WITHOUT CEMENT MORTAR LINING conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasketjointing..,asperthespecification,allcompleteasper direction of engineer-in-charge (Earth work in trenches jointing of pipesspecialsandfittingtobemeausredseparately)(Including cost with labour) |
| 81 | 200mm dia DI Pipe(K-9) |
| 82 | 250mm dia DI Pipe(K-9) |
| 83 | 300mm dia DI Pipe(K-9) |
| 84 | Supplying all materials, labour and T&P for Providing Push-on-joints confirmingtoIS:3114tocentrifugally(Spun)CastIronPipesor Ductile Iron pipes using rubber gasket conformingto IS:5382of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all completeasperspecificationanddirectionofEngineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.[excluding cost of rubber gasket] Without Rubber Ring |
| 85 | 200mm dia Push-on-joints |
| 86 | 250mm dia Push-on-joints |
| 87 | 300mm dia Push-on-joints |
| 88 | Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the followingdiameterasperP.H.specificationsincludingcarriageof materialsfromstoretoworksiteetccomplete.(excludingearth work in excavation,jointing and cost of specials) |
| 89 | Fixing cast ironDI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel)for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK |
| 90 | 200mm dia D/F Sluice Valve (PN1.6) |
| 91 | 250mm dia D/F Sluice Valve (PN1.6) |
| 92 | 300mm dia D/F Sluice Valve (PN1.6) |
| 93 | Supplying all materials, labour, and making flanged joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete. |
| 94 | 200mm dia D/F Sluice Valve (PN1.6) |
| 95 | 250mm dia D/F Sluice Valve (PN1.6) |
| 96 | 300mm dia D/F Sluice Valve (PN1.6) |
| 97 | Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipeas per specifications including testing with cost of all jointing materials, transportation to site etc. all completeas per the specifications and directions of Engineer-in-charge. |
| 98 | 200mm dia MJ Socket |
| 99 | 250mm dia MJ Socket |
| 100 | 300mm dia MJ Socket |
| 101 | Supplying all labour, T&P materials etc.and constructingbrick masonry sluice valve chamber of following internal sizes :earthworkinexcavationinallkindsofsoil; layingof150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm sizemetal; 250mm thick brickmasonryworkinC.M(1:4)with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thickcementplasteringwithCM(1:3)withpunning for inside surfaces & out side plastering above GL & cement pointingbelow GL etc.all complete including precastFactorymadeHeavyduty RCC cover slab with Frame ( SD-20) made out of M30 concrete to withstandagainst20MTvehicularload aspertheapproved drawing if any and the direction of Engineer-in-charge. 1.20m x 1.20m x 1.20 m ( deep) |
| 102 | Supplyingfillinginfoundation&plinthwithsandwellwatered& rammed including cost, conveyance, royalties, taxes all labour, T&P etc. all complete as per specification and direction of Engineer-in-charge. |
| 103 | Providing cement concrete(1:3:6) with 40mm size CBHGmetal includingcostofallmaterials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge. |
| 104 | Supplying all materials, labourT & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge. |
| 105 | Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete. |
| 106 | Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC. |
| 107 | Supplying all materials Labour& T&Pfor Fixing of Tamper proof Air Valvefor water works purposes conforming to IS specification for the followingnominal diameters as per specificationcomplete including cost of Air valve. (VAG /Talis Make) |
| 108 | 100mm dia Tamper proof Duojet Air Valve |
| 109 | ESR (DMA-1, DMA-2 & DMA-3) |
| 110 | Design, Supply, Construction, Testing & Commisioning of ElevatedServiceReservoir(ESR) with pile/ Raft foundation for following capacity & staging height above 20 mtr for all work such as soil investigation, excavation, back filling & disposal of earth, RCC & PCC of required grade,s huttering, brick work, painting, finishing, connection pipes beyond tank structure 15 mtr for each pipe, valves fitting, expansion joint, expansion below, mechanical level indicator lightening arrestor including supply of all labours, materials T & P etc., all completeasperthedirectionof Engineer-in-charge. |
| 111 | DMA-1 (25 M) |
| 112 | DMA-2 (25 M) |
| 113 | DMA-3 (25 M) |
| 114 | Network Improvement (Installation of Isolation Valve, Interconnection work & SV Chamber) DMA-1, DMA-2 & DMA-3 |
| 115 | DMA-1 |
| 116 | Dismantlingofcementconcretepavementbymechanicalmeans using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantledmaterialsuptoaleadof1000metres,stacking serviceable and unserviceable materials separately |
| 117 | 65% CC Road |
| 118 | 15% Bituminous Road |
| 119 | 20% Metalled Road |
| 120 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 121 | LayingintrenchesCENTRIFUGALLYCAST(SPUN)DUCTILEIRON PRESSURE,SOCKET&SPIGOTPIPES,CLASS-K7WITHOUT CEMENT MORTAR LINING conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasketjointing..,asperthespecification,allcompleteasper direction of engineer-in-charge (Earth work in trenches jointing of pipesspecialsandfittingtobemeausredseparately)(Including cost with labour) |
| 122 | 100mm dia DI Pipe(K-7) |
| 123 | 150mm dia DI Pipe(K-7) |
| 124 | 200mm dia DI Pipe(K-7) |
| 125 | Supplying all materials, labour and T&P for Providing Push-on-joints confirmingtoIS:3114tocentrifugally(Spun)CastIronPipesor Ductile Iron pipes using rubber gasket conformingto IS:5382of Styrene Butadene Rubber (S.B.R) quality, testing of joints,etc. all completeasperspecificationanddirectionofEngineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work. Without Rubber Ring |
| 126 | 100mm dia Push-on-joints |
| 127 | 150mm dia Push-on-joints |
| 128 | 200mm dia Push-on-joints |
| 129 | Supplyingallmaterials,labour,andT&P forproviding mechanical joints to flange socket as per relevant IS with suitable flanged joints andfitting&fixingoffollowinginpipe asperspecifications including testing with cost of all jointing materials, transportation to siteetc.allcomplete asperthespecificationsanddirectionsof Engineer-in-charge. |
| 130 | 100mm dia MJ Socketed Tail Piece - |
| 131 | 150mm dia MJ Socketed Tail Piece |
| 132 | 200mm dia MJ Socketed Tail Piece - |
| 133 | Cutting of C.I /DI pipe by eletric arc cutting,at site including cost of materials, labour,T&P etc all complete. |
| 134 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specificationof following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 135 | 100mm dia MS Pipe 4.5 mm thick |
| 136 | 100mm dia M.S. Flange.(10mm thick) |
| 137 | 100mm dia x 45" M.S. Bend |
| 138 | 150mm dia MS Pipe 6.3 mm thick |
| 139 | 150mm dia M.S. Flange.(12mm thick) |
| 140 | 150mm dia x 45" M.S. Bend |
| 141 | 200mm dia M.S.Pipe (6.30mm thick) |
| 142 | 200mm dia M.S. Flange.(12mm thick) |
| 143 | 200mm dia x 45" M.S. Bend |
| 144 | 250mm dia M.S.Pipe (6.30mm thick) |
| 145 | 250mm dia M.S. Flange.(12mm thick) |
| 146 | 250mm dia x 45" M.S. Bend |
| 147 | 300mm dia M.S.Pipe (7.10mm thick) |
| 148 | 300mm dia M.S. Flange.(12mm thick) |
| 149 | 150mm dia Equal MS A/F Tee |
| 150 | Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the followingdiameterasperP.H.specificationsincludingcarriageof materialsfromstoretoworksiteetccomplete.(excludingearth work in excavation,jointing and cost of specials) |
| 151 | Supplying all labour and T&P for flame cutting of following dia MS pipe of following upto 8mmthickintreanchesbygascuttersetofpocketetcall complete |
| 152 | Providing testing & Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete. |
| 153 | Providing & Fixing cast ironDI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel)for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK |
| 154 | 100mm dia D/F Sluice Valve (PN1.6) |
| 155 | 150mm dia D/F Sluice Valve (PN1.6) |
| 156 | 200mm dia D/F Sluice Valve (PN1.6) |
| 157 | Supplying all materials, labour, and making flanged joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete. |
| 158 | 100mm dia |
| 159 | 150mm dia |
| 160 | 200mm dia |
| 161 | Supplying all labour, T&P materials etc.and constructingbrick masonry sluice valve chamber of following internal sizes :earthworkinexcavationinallkindsofsoil; layingof150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm sizemetal; 250mm thick brickmasonryworkinC.M(1:4)with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thickcementplasteringwithCM(1:3)withpunning for inside surfaces & out side plastering above GL & cement pointingbelow GL etc.all complete including precastFactorymadeHeavyduty RCC cover slab with Frame ( SD-20) made out of M30 concrete to withstandagainst20MTvehicularload aspertheapproved drawing if any and the direction of Engineer-in-charge. |
| 162 | 0.90 m x 0.90 m x 0.90 m ( deep) |
| 163 | for 100mm dia SV |
| 164 | for 150mm dia SV |
| 165 | 1.20 m x 1.20 m x 1.20 m ( deep) |
| 166 | for 200mm dia SV |
| 167 | Supplyingfillinginfoundation&plinthwithsandwellwatered& rammed including cost, conveyance, royalties, taxes all labour, T&P etc all complete as per specification and direction of Engineer-in-charge. |
| 168 | Providing cement concrete(1:3:6) with 40mm size CBHGmetal includingcostofallmaterials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge. |
| 169 | Supplying all materials, labourT & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge. |
| 170 | Supplying all materials, labour, T&P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete. |
| 171 | Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC. |
| 172 | Supplying all materials Labour& T&Pfor Fixing of Tamper proof Air Valvefor water works purposes conforming to IS specification for the followingnominal diameters as per specificationcomplete including cost of Air valve.(VAG/ Talis Make) |
| 173 | 50 mm dia Tamper proof Duojet Air Valve |
| 174 | DMA-2 |
| 175 | Dismantlingofcementconcretepavementbymechanicalmeans using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantledmaterialsuptoaleadof1000metres,stacking serviceable and unserviceable materials separately (Considering) |
| 176 | 65% CC Road |
| 177 | 15% Bituminous Road |
| 178 | 20% Metalled Road |
| 179 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 180 | LayingintrenchesCENTRIFUGALLYCAST(SPUN)DUCTILEIRON PRESSURE,SOCKET&SPIGOTPIPES,CLASS-K7WITHOUT CEMENT MORTAR LINING conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasketjointing..,asperthespecification,allcompleteasper direction of engineer-in-charge (Earth work in trenches jointing of pipesspecialsandfittingtobemeausredseparately)(Including cost with labour) |
| 181 | 100mm dia DI Pipe(K-7) |
| 182 | 150mm dia DI Pipe(K-7) |
| 183 | 200mm dia DI Pipe(K-7) |
| 184 | 250mm dia DI Pipe(K-7) |
| 185 | Supplying all materials, labour and T&P for Providing Push-on-joints confirmingtoIS:3114tocentrifugally(Spun)CastIronPipesor Ductile Iron pipes using rubber gasket conformingto IS:5382of Styrene Butadene Rubber (S.B.R) quality, testing of joints,etc. all completeasperspecificationanddirectionofEngineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work. Without Rubber Ring |
| 186 | 100mm dia Push-on-joints |
| 187 | 150mm dia Push-on-joints |
| 188 | 200mm dia Push-on-joints |
| 189 | 250mm dia Push-on-joints |
| 190 | Supplyingallmaterials,labour,andT&P forproviding mechanical joints to flange socket as per relevant IS with suitable flanged joints andfitting&fixingoffollowinginpipe asperspecifications including testing with cost of all jointing materials, transportation to siteetc.allcomplete asperthespecificationsanddirectionsof Engineer-in-charge. |
| 191 | 100mm dia MJ Socketed Tail Piece - |
| 192 | 150mm dia MJ Socketed Tail Piece |
| 193 | 200mm dia MJ Socketed Tail Piece |
| 194 | 250mm dia MJ Socketed Tail Piece |
| 195 | Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials, labour,T&P etc all complete. |
| 196 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specificationof following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 197 | 100mm dia MS Pipe 4.5 mm thick |
| 198 | 100mm dia M.S. Flange.(10mm thick) |
| 199 | 100mm dia x 45" MS Bend |
| 200 | 150mm dia MS Pipe 6.3 mm thick |
| 201 | 150mm dia M.S. Flange.(12mm thick) |
| 202 | 150mm dia x 45" MS Bend |
| 203 | 200mm dia M.S.Pipe (6.30mm thick) |
| 204 | 200mm dia M.S. Flange.(12mm thick) |
| 205 | 200mm dia x 45" MS Bend |
| 206 | 250mm dia M.S.Pipe (6.30mm thick) |
| 207 | 250mm dia M.S. Flange.(12mm thick) |
| 208 | 250mm dia x 45" MS Bend |
| 209 | 300mm dia M.S.Pipe (7.10mm thick) |
| 210 | 300mm dia M.S. Flange.(12mm thick) |
| 211 | 150mm dia Equal MS A/F Tee |
| 212 | Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the followingdiameterasperP.H.specificationsincludingcarriageof materialsfromstoretoworksiteetccomplete.(excludingearth work in excavation,jointing and cost of specials) |
| 213 | Supplying all labour and T&P for flame cutting of following dia MS pipe of following upto 8mmthickintreanchesbygascuttersetofpocketetcall complete |
| 214 | Providing testing & Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete. |
| 215 | Providing & Fixing cast ironDI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel)for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK |
| 216 | 100mm dia D/F Sluice Valve (PN1.6) |
| 217 | 150mm dia D/F Sluice Valve (PN1.6) |
| 218 | 200mm dia D/F Sluice Valve (PN1.6) |
| 219 | 250mm dia D/F Sluice Valve (PN1.6) |
| 220 | Supplying all materials, labour, and making flanged joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete. |
| 221 | 100mm dia |
| 222 | 150mm dia |
| 223 | 200mm dia |
| 224 | 250mm dia |
| 225 | 300mm dia |
| 226 | Supplying all labour, T&P materials etc.and constructingbrick masonry sluice valve chamber of following internal sizes :earthworkinexcavationinallkindsofsoil; layingof150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm sizemetal; 250mm thick brickmasonryworkinC.M(1:4)with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thickcementplasteringwithCM(1:3)withpunning for inside surfaces & out side plastering above GL & cement pointingbelow GL etc.all complete including precastFactorymadeHeavyduty RCC cover slab with Frame ( SD-20) made out of M30 concrete to withstandagainst20MTvehicularload aspertheapproved drawing if any and the direction of Engineer-in-charge. |
| 227 | 0.90 m x 0.90 m x 0.90 m ( deep) |
| 228 | for 100mm dia SV |
| 229 | for 150mm dia SV |
| 230 | 1.20 m x 1.20 m x 1.20 m ( deep) for 200mm dia SV for 250mm dia SV |
| 231 | Supplyingfillinginfoundation&plinthwithsandwellwatered& rammed including cost, conveyance, royalties, taxes all labour, T&P etc all complete as per specification and direction of Engineer-in-charge. |
| 232 | Providing cement concrete(1:3:6) with 40mm size CBHGmetal includingcostofallmaterials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge. |
| 233 | Supplying all materials, labourT & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge. |
| 234 | Supplying all materials, labour, T&P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete. |
| 235 | Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC. |
| 236 | Supplying all materials Labour& T&Pfor Fixing of Tamper proof Air Valvefor water works purposes conforming to IS specification for the followingnominal diameters as per specificationcomplete including cost of Air valve.(VAG/ Talis Make) |
| 237 | 50 mm dia Tamper proof Duojet Air Valve |
| 238 | DMA-3 |
| 239 | Dismantlingofcementconcretepavementbymechanicalmeans using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantledmaterialsuptoaleadof1000metres,stacking serviceable and unserviceable materials separately (Considering) |
| 240 | 65% CC Road |
| 241 | 15% Bituminous Road |
| 242 | 20% Metalled Road |
| 243 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 244 | LayingintrenchesCENTRIFUGALLYCAST(SPUN)DUCTILEIRON PRESSURE,SOCKET&SPIGOTPIPES,CLASS-K7WITHOUT CEMENT MORTAR LINING conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasketjointing..,asperthespecification,allcompleteasper direction of engineer-in-charge (Earth work in trenches jointing of pipesspecialsandfittingtobemeausredseparately)(Including cost with labour) |
| 245 | 100mm dia DI Pipe(K-7) |
| 246 | 150mm dia DI Pipe(K-7) |
| 247 | 200mm dia DI Pipe(K-7) |
| 248 | 250mm dia DI Pipe(K-7) |
| 249 | Supplying all materials, labour and T&P for Providing Push-on-joints confirmingtoIS:3114tocentrifugally(Spun)CastIronPipesor Ductile Iron pipes using rubber gasket conformingto IS:5382of Styrene Butadene Rubber (S.B.R) quality, testing of joints,etc. all completeasperspecificationanddirectionofEngineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work. Without Rubber Ring |
| 250 | 100mm dia Push-on-joints |
| 251 | 150mm dia Push-on-joints |
| 252 | 200mm dia Push-on-joints |
| 253 | 250mm dia Push-on-joints |
| 254 | Supplyingallmaterials,labour,andT&P forproviding mechanical joints to flange socket as per relevant IS with suitable flanged joints andfitting&fixingoffollowinginpipe asperspecifications including testing with cost of all jointing materials, transportation to siteetc.allcomplete asperthespecificationsanddirectionsof Engineer-in-charge. |
| 255 | 100mm dia MJ Socketed Tail Piece - |
| 256 | 150mm dia MJ Socketed Tail Piece |
| 257 | 200mm dia MJ Socketed Tail Piece |
| 258 | 250mm dia MJ Socketed Tail Piece |
| 259 | Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials, labour,T&P etc all complete. |
| 260 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specificationof following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 261 | 100mm dia MS Pipe 4.5 mm thick |
| 262 | 100mm dia M.S. Flange.(10mm thick) |
| 263 | 100mm dia x 45" MS Bend |
| 264 | 150mm dia MS Pipe 6.3 mm thick |
| 265 | 150mm dia M.S. Flange.(12mm thick) |
| 266 | 150mm dia x 45" MS Bend |
| 267 | 200mm dia M.S.Pipe (6.30mm thick) |
| 268 | 200mm dia M.S. Flange.(12mm thick) |
| 269 | 200mm dia x 45" MS Bend |
| 270 | 250mm dia M.S.Pipe (6.30mm thick) |
| 271 | 250mm dia M.S. Flange.(12mm thick) |
| 272 | 250mm dia x 45" MS Bend |
| 273 | 150mm dia Equal MS A/F Tee |
| 274 | Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the followingdiameterasperP.H.specificationsincludingcarriageof materialsfromstoretoworksiteetccomplete.(excludingearth work in excavation,jointing and cost of specials) |
| 275 | Supplying all labour and T&P for flame cutting of following dia MS pipe of following upto 8mmthickintreanchesbygascuttersetofpocketetcall complete |
| 276 | Providing testing & Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete. |
| 277 | Providing & Fixing cast ironDI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel)for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK |
| 278 | 100mm dia D/F Sluice Valve (PN1.6) |
| 279 | 150mm dia D/F Sluice Valve (PN1.6) |
| 280 | 200mm dia D/F Sluice Valve (PN1.6) |
| 281 | 250mm dia D/F Sluice Valve (PN1.6) |
| 282 | Supplying all materials, labour, and making flanged joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete. |
| 283 | 100mm dia |
| 284 | 150mm dia |
| 285 | 200mm dia |
| 286 | 250mm dia |
| 287 | Supplying all labour, T&P materials etc.and constructingbrick masonry sluice valve chamber of following internal sizes :earthworkinexcavationinallkindsofsoil; layingof150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm sizemetal; 250mm thick brickmasonryworkinC.M(1:4)with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thickcementplasteringwithCM(1:3)withpunning for inside surfaces & out side plastering above GL & cement pointingbelow GL etc.all complete including precastFactorymadeHeavyduty RCC cover slab with Frame ( SD-20) made out of M30 concrete to withstandagainst20MTvehicularload aspertheapproved drawing if any and the direction of Engineer-in-charge. |
| 288 | 0.90 m x 0.90 m x 0.90 m ( deep) for 100mm dia SV |
| 289 | for 150mm dia SV |
| 290 | 1.20 m x 1.20 m x 1.20 m ( deep) for 200mm dia SV for 250mm dia SV |
| 291 | Supplyingfillinginfoundation&plinthwithsandwellwatered& rammed including cost, conveyance, royalties, taxes all labour, T&P etc all complete as per specification and direction of Engineer-in-charge. |
| 292 | Providing cement concrete(1:3:6) with 40mm size CBHGmetal includingcostofallmaterials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge. |
| 293 | Supplying all materials, labourT & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge. |
| 294 | Supplying all materials, labour, T&P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete. |
| 295 | Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC. |
| 296 | Supplying all materials Labour& T&Pfor Fixing of Tamper proof Air Valvefor water works purposes conforming to IS specification for the followingnominal diameters as per specificationcomplete including cost of Air valve.(VAG/ Talis Make) |
| 297 | 50 mm dia Tamper proof Duojet Air Valve |
| 298 | Repair & replacement of House Connection Work (DMA-1, DMA-2 & DMA-3) |
| 299 | Supplyingallmaterials,Labour&T&Pforproviding New House connections to beneficiaries from PHE Deptt./ WATCOCI/ DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc.including earth work excavation, cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damaged road with CC (1:2:4) after completitionof thework,liftingofexcessexcavated materials/debrisesfromworksite & disposing within 5 KMradious bymechanicaltransport,fixing1/8"dia brass/GMferrulewithfollowingdia.compositeStrap SaddleintheCI/DIpipeline,cuttingholesinbrick/ stone/RCCmasonarywork,repairthe brokenholes, cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0mtr /10 mtr respectively )& fittings, 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in- Charge. |
| 300 | With 100mm dia distribution main (With Saddle) |
| 301 | With 100mm dia distribution main (Without Saddle) |
| 302 | With 150mm dia distribution main (With Saddle) |
| 303 | With 150mm dia distribution main (Without Saddle) |
| 304 | Supplying all materials Labour & T & P for fitting & fixing of 20mm dia MDPE pipe (10kgf/cm2) with compression fittings for connection with ferrule & uPVC service pipe of different diameter to make the connection leak proof including cost of required length of 20mm dia MDPEpipe up to 1.0 mtr ,both side elbow/Female threaded elbow/Male threaded elbow/Both side adopter/Male threaded adoptor/ Female threaded adoptor etc.completeas per site condition & ditrection of Engineer in charge. |
| 305 | Constructionof PLC cum Duty Room,Chlorination chamber, Sitedevelopment&Yard Lighting arrangement |
| 306 | Construction of PLC - (3 No) & Chlorination Room - (3 No) |
| 307 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 308 | Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge. |
| 309 | Cement concrete (1:3:6)using 40 mm. size hard granite crusher brokenmetal including watering and curing including cost, conveyance, royalties and taxes of all materials, labour, T&P etc. complete as directed by Engineer-in charge. |
| 310 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentt in cement mortar (1:6) in foundation and plinth |
| 311 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentt in cement mortar (1:4) in foundation and plinth |
| 312 | Supplying all materials,labour and T&P for filling foundation and plinth with excavated materials as per direction of Engineer-in-charge. |
| 313 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentt in cement mortar (1:6) in Superstructure . |
| 314 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantlingthen after castingincluding cost of materials all complete. |
| 315 | Column footing and plinth beam |
| 316 | Lintel |
| 317 | Column |
| 318 | Roof Beam |
| 319 | Chajja |
| 320 | Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shutteringwith all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge. |
| 321 | Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge. |
| 322 | Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:6) for brick work including curing scafolding etc. complete. |
| 323 | Supplying all materials labour & T & P for 16 mm. thick cement plaster in cement mortar (1:6) for brick work including curing scafolding etc. complete. |
| 324 | Supplying all materials labour & T & P for 12 mm. thick cement plaster in cement mortar (1:4) for RCC surface including curing scafolding etc. complete. |
| 325 | Supplying all Materials Labour & T & P for Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams etc. complete as per direction of Engineer in charge. |
| 326 | Providing, fitting and fixing Solid PVC Flush door with door frame including both side pannelling etc, all complete in all respect as per the direction of Engineer-in-Charge. |
| 327 | Providing fitting & fixing of uPVC (Unplasticised polyvinyle chloride) windows with 5 mm clear float glass of I.G profile as per approved specification including all costconveyance labour T & P etc. complete. |
| 328 | Supplying all labour,T&P,materials for fittings, fixing of vetrified floor tile of size 600mm x 600mm of R.A.K / Varmora or equivalent make ( premium) with application of polymer modified cement base water resistant adhesive bed of required thickness 10mm and filling the joints with epoxy grout of approved quality etc. all complete. |
| 329 | Providing, fitting & fixing of false ceiling with Arm strong silhouette main runner, cross tee, wall angel with fine fissured RH-99 board on 4 walls to be fixed by means of steel screw, PVC plug & the Arm strong grid 2"-0" x 2"-0" suspended from ceiling etc. complete. |
| 330 | Fixing Vertified industrial floor tiles of premium grade having thickness 8mm to 10 mm confirming to IS:4457 of size 30cm x 30cm infloors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete. |
| 331 | Supplying all materials , labour, T&P, and fixingfloor tiles of size 300x300mm on 25mm thick bed of cement mortar (1:1), jointed with neat cement slurry mixed with pigments to match the sheds of tiles, including rubbing and polishing etc. all complete. |
| 332 | Supplying all materials, labour, T&P and fixing of ceramic glaze tiles in dados, skirting with 450mm x 300mm sizeon 12mm. thick C.M. plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shed of the tiles including rubbing, polishing etc all complete. as per the direction of the Engineer in charge. |
| 333 | Providing & fixing of Fixed vetilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6mm. Thick D quilty, galvanized as per IS-277 with Zinc of 120Gm/Sqm) with paint specification being with primer of 5-7 microns and finished paint with plyster paint (black /pearl white/Choclate Brown ) of 12-16 microns along with alkyd backer at the back of 5-7 micron and the size of outer frame being of 46x52mm and with all vetrical & horizontal mullions ar of 46x70mm & fixed beading are of 18x25mm.Accessories /gasket are to be used as per the manufacture"s,supply and specificationlike handle being made of high grade aluminiumpower coated with nylon reciver & gasket will be made of EPDM. All corner brackets are to made of CRCA with zinc phospeting. the mullian caps & louvered-clips should be of glass filled nylon. the section are to be cut to length,mitre jointed with corne bracket & frames are fixed to the concret/ masonary work by means of self excapading screws & glas to be used of 5mm refelective with all taxes & For site at BBSR all complete. |
| 334 | Supplying all materials, labour, T&P and fitting and fixing of30 mm single panel PVC door shutter withdoor frame of 40mmx48mm sizeof approved quality including fixing materials and cost , transportation , taxes etc. all complete in all respect as per the direction of the Engineer-in-charge. |
| 335 | Supplying all materials labour T&P for providing M.S. Grill gate made out of different size Square bar, Flat, Angle, Chanelas per following size as per specification.all complete. (Size - Double Leafed 6m x 1.8m height - 1 No. & Single Leafed 1.5m x 1.8m height - 1 No.) |
| 336 | Supplying all materials,labour and T&P for cutting grooves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification. |
| 337 | 20mm dia uPVC pipe |
| 338 | Providing and fixing to wall, ceiling and floor / in treanches ofUPVC ASTM (Sch-80)pipe& fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete(including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. |
| 339 | 20mm dia uPVC pipe (wall & ceiling) |
| 340 | 25mm dia uPVC pipe Trenches |
| 341 | 25mm dia uPVC pipe (wall & ceiling) |
| 342 | 25mm dia brass ball Valve |
| 343 | 25mm dia brass Horizontal NR Valve |
| 344 | 25mm dia uPVC Ball valve with Metal Ball |
| 345 | Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 346 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) |
| 347 | EWC with P trap |
| 348 | Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification. |
| 349 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to specification, with all fittings and fixtures complete. |
| 350 | Supplying fitting & fixing of the following H.C.I./ P.V.C S.W.R pipe & fittings as per PH specification & direction of EIC. |
| 351 | 110mm dia PVC SWR Pipe |
| 352 | 110mm dia PVC SWR Door Bend |
| 353 | 110mm dia PVC SWR Plain Bend |
| 354 | 110mm dia PVC SWR P Trap |
| 355 | 110mm dia PVC SWR Cowl |
| 356 | 110mm dia PVC SWR Clamp |
| 357 | Supplying, fitting & fixing the following PH fittings and fixtures of standard make & quality as per PH specification. |
| 358 | 15mmdia C.P. Long body bib cock. |
| 359 | 15mm diaC.P. Two-in-One bib cock |
| 360 | C.P. Soap Holder |
| 361 | C.P. towel rail.(600x20)mm |
| 362 | C.P. glass self with glass |
| 363 | 5" C.P. Grating |
| 364 | C.P. waste. (32mm - Small) |
| 365 | 15mm dia c.p. pillarcock |
| 366 | 15mm dia c.p.angular stopcock |
| 367 | Bevelled Edge Mirrior |
| 368 | 32mmx800mm long PVC corrugated waste pipe |
| 369 | 15mmx450mm PVC connection pipe |
| 370 | C.P. extension piece- |
| 371 | Supplying all materials,labour and T & P for construction of 1.2 mtr dia × 1.5 mtr depth RCC ring soak - way pit filled with brick bats incuding earth work in excavation and refilling of cavity around the pit & making perforated hole on the wall of soak way pit for soaking of waste water etc.all complete as per approved design and drawing. |
| 372 | RCC ring Soak way pit of size 1.20mtr dia x 1.50 mtr deep |
| 373 | Supplying all materials,labour and T & P for construction of Septic tank made out of RCC well ring of 1.2 mtr dia × 1.5 mtr depth with cement plastering to out side surface in CM (1:4) & inside plastering in CM (1:4) with cement punning including earth work in excavation and refilling of cavity around the pit etc.all complete as per approved design and drawing. |
| 374 | RCC ring Septic tankof size 1.20mtr dia x 1.50 mtr depth |
| 375 | Supplying all materials labour T&P for providing M.S. Grill/ Pipe as per following size as per specification.all complete. |
| 376 | Finishing plastered surfaces of walls with Berger Synthetic putty (interior wall puty)wall putyand making smooth to receive painting. |
| 377 | Provision for Plastic emulsion painting two coats to walls withover a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete .(Including Primer) |
| 378 | Supplying all materials labour & T & P for fitting & fixing of 1.5 ton capacity AC including testing & commissioning etc. complete as per direction of Engineer in Charge. (LG/Voltas/Blue Star) |
| 379 | Providing wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes& putty including cost, conveyance, royalities etc, all complete.(Including Primer) |
| 380 | Supplying all materials , labour & T & P for Painting of M.S. pipe, Gate, Door & windows with 2 coats of enamel paint over a coat ofprimerincludingcost of all labour, materials with all taxes, lead ,T&P etc all complete. |
| 381 | Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard) |
| 382 | Light Points |
| 383 | Group - A |
| 384 | Group - B |
| 385 | 5A Plug Point |
| 386 | Fan Point (Group - A) |
| 387 | Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge. |
| 388 | Step up modular regulator for Fan |
| 389 | 15watt LED Bulb. |
| 390 | 1200mm Ceiling Fan Havells make Fusion |
| 391 | Electric 200mm Exhaust Fan (Havells Ventil air DB) |
| 392 | Electric 200mm Exhaust Fan (Havells Ventil air DX white) |
| 393 | Titanio Pro LED Tube Light -18W (Double side connection) |
| 394 | 32A Double Pole MCB. |
| 395 | 5 Amp switch |
| 396 | 5 Amp socket |
| 397 | Ceiling Rose - |
| 398 | Angle Holder |
| 399 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of I S I marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as quired. (Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 400 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex/L&T/Anchor/Havels/V Guard)- Data for 50mtr. |
| 401 | Supplying all materials,labour, t&p and cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification. |
| 402 | Supply, Installation, Testing, and Commissioning of 63Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge. Make-SEIMENS /HPL /ANCHOR /L&T / HAVELS / C & S/RK) |
| 403 | Supply and fixing of following rating four pole (three phase and neutral) 240 V residual current break (RCCB) having a sensitivity current up to 300 milli ampere in theISI marked complete with connection testing and commissioning etc as required. |
| 404 | Site development & Approach Road lighting Work |
| 405 | Boundary Wall (For 3 Nos ESR) |
| 406 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. 339 Cum |
| 407 | Supplying all materials labour & T & P for cement concrete 1:3:6 using 40mm size hard black granite metal including watering curing etc. complete. |
| 408 | Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge. |
| 409 | Supplying all materials, labour and T&P for Transportation ofexcavated material & disposingupto 10KM from work site including loading, unloading & stacking, supplying of all labours, tools & plants etc. all complete as per specification and direction of Engineer-in-charge. |
| 410 | Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shutteringwith all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge. |
| 411 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentt in cement mortar (1:6) in Superstructure . |
| 412 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantlingthen after castingincluding cost of materials all complete. (R.C.C. Beams, Column, Grider and Bressmer, etc. in Ground Floor) |
| 413 | Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shutteringwith all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge. |
| 414 | Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge. |
| 415 | Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:4) for brick work including curing scafolding etc. complete. |
| 416 | Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:6) for brick work including curing scafolding etc. complete. |
| 417 | Supplying all materials labour T&P for providing M.S. Grill gate made out of different size Square bar, Flat, Angle, Chanelas per following size as per specification.all complete. (Size - Double Leafed 6m x 1.8m height - 1 No. & Single Leafed 1.5m x 1.8m height - 1 No.) |
| 418 | Providing & fixing Concertina Coil fencing with punched tape concertina coil 600mm dia 10.0 Mtr openable length (total length 90m), having 50 nos rounds per 6m length, upto 3m height of wall with existing angle iron "U" shaped placed 2.40mapart and with 10 horizontal R.B.T. reinforced barbed wire stud tied with GI staples & GI clips to retain including all cost of materials, labour, transportation etc, all complete as per specification and direction of Engineer-in-charge. |
| 419 | Providing wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes& putty including cost, conveyance, royalities etc, all complete. |
| 420 | Supplying all materials , labour & T & P for Painting of M.S. pipe, Gate, Door & windows with 2 coats of enamel paint over a coat ofprimerincludingcost of all labour, materials with all taxes, lead ,T&P etc all complete. |
| 421 | Approach Road(For 3 Nos ESR) |
| 422 | Supplying all materials, labour, T&P and filling of road surface with borrow earth (1.0 mtr.) from the approved quarry and compacting to the requireddensity with testing including cost of royalty, lead & transportation & labour cess etc all complete as per the direction of Engineer-in-charge. |
| 423 | Supplying moorum for sub base of road (150 mm Compacted) at work site from the approved quarry including cost of all materials, taxes, royalty, conveyance & labour cess etc all complete. |
| 424 | Supplying all labour, T&P and Laying of sub base of road in layers not exceeding 100mm. Wattering and compacting to the required density with testingincluding cost of roayality, lead & transportation etc all complete. |
| 425 | Supplying 4cm size hard granite metal forroad work at work site including cost of all labour, T& P etc all complete |
| 426 | Supplying all labour, T&P and Spreading metals and packing the voids with small stone & hand packing to proper camber including conveying & spreading of filler materials and filling the interstics by spreading the same over the surface, watering and consolidation with P.R.R |
| 427 | Supplying all materials, labour, T&P and providing rough stone dry packing in approns and revetment with hard granite stone including cost of all materials, taxes, conveyance of all materials to work site, labour cess etc all completeas per specification and direction of Engineer-in-charge. |
| 428 | P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete in all respecte as per Scope & Technical Specification &direction of Engineer-in-Charge. |
| 429 | R.C.C. M-20 Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator with proper cambering and filling berm by excavated earth and all leads and lifts including frame works etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN &direction of Engineer-in-Charge.(In foundation & plinth) |
| 430 | Rigid & smooth centering & shuttering for R.C.C. works including false work & dismantling them after casting including cost of materials, etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN &direction of Engineer-in-Charge. (RCC Foundation) |
| 431 | Providing skin reinforcement for road work using HYSD reinforcementincluding bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P, etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN &direction of Engineer-in-Charge. [8mm tor @ 300 mm x 300 mm] |
| 432 | Approach Road lighting work (For 3 Nos ESR) |
| 433 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 434 | Supplying all materials labour & T & P for cement concrete 1:3:6 using 40mm size hard black granite metal including watering curing etc. complete. |
| 435 | Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge. |
| 436 | Supplying all materials, labour and T&P for Transportation ofexcavated material & disposingupto 10KM from work site including loading, unloading & stacking, supplying of all labours, tools & plants etc. all complete as per specification and direction of Engineer-in-charge. |
| 437 | Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shutteringwith all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge. |
| 438 | Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge. |
| 439 | Supply, Installation, Testing Wiring & Commissioningof Lighting Distribution Panel Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs.Having63A 4P MCB-1 Nos,32A FP MCB-2 Nos, 32A DP MCB-1 Nos, 16A DP MCB-3Nos, 10A DP MCB-1Nos,All switchgear and controlgear make- Siemens, schneider, ABB, L&T, LEGRAND. All completed asper electrical specification and as per direction of EIC. |
| 440 | Supply fitting fixing & errection of Hot dip octagonal smart pole for mounting and installation of the LED street light Luminaries as per following technical specifications - (i) Height - 6.00 mtr (ii) Top dis - 70 mm (iii) Bottom dia -130mm (iv) Sheet thichness - 3 mm (v) Base plate dimension - 200 mm x 200mm x 12mm with required bolt & fittings For yard lighting for Approach Road. |
| 441 | Supplying fitting & fixing of Single arm Bracket of 1.0 mtr lengthsuitable for fixing in 70mm top yard lighting octagonal smart pole |
| 442 | Supplying all materials labour & T & P for fitting & fixing of the following electrical installations / power supply cable including earth work excavation etc. complete as per direction of Engineer in charge. |
| 443 | Cable junction boxes IP66/69 weather proof for outdoor installation of size 104mm x 104mm x 70 mm (with knockouts for cable entry - Black colour) Preferable Hensel make Cat No. KF 0404B) |
| 444 | Connector suitable for 4sqmm |
| 445 | 2.50 Sqmm 4 core copper armoured Cable including laying |
| 446 | Supplying fitting & fixing of 32 mm dia GI pipe of 1.0m long duly welded with MS plate as base plate& making hole in the base plate for fixing of anchor bolt including cost of anchor bolt etc. Complete. |
| 447 | Supply fitting & fixing of energy saving & envoirnmental friendly long life pressure die cast housing with toughened glass& with option of secondary optic with IP66 protection 50 Wt LED light .(Preferable HALONIXmake Freedom LUNOS - SUPER l Cat No.HLSLD-15-45-CWL-R) |
| 448 | Supply fitting & fixing of following materials for Yard Lightingarrangement inside Pumping station campus etc complete.. |
| 449 | 19 mmService Cable Gland |
| 450 | 2.5 mm copper cablesocket |
| 451 | Leak Detection arrangement. (Rising Main, DMA-1, DMA-2 & DMA-3) |
| 452 | PART-A - PROCUREMENT OF INSTRUMENTS. |
| 453 | Provision for procurement of Digital Quatroleak noise Correlaor for pinpoints detection of leakage automatically by arrival time difference between sensors, 6 ways simultaneous correlation with 4 sensors and wireless communication with the following features & specificationsall complete as per direction of Engineer-in-charge. (Make-Fuji/Gutterman/Xylem) FEATURES: 6 ways simultaneous correlation Wireless communication Capable of long distance survey by radio relay function Recording leakage data. Filter for large diameter pipes up to 3000mm, Recorded leakage data during survey should be recalculated after resetting of pipe information. SPECIFICATIONS Main Unit Operation Method :- Polarity correlation Filter range :- Thru, 80Hz to 5000Hz (4 low & 4 high) Delay time range :- +50ms to + 3200ms Standard resolution :- 25µs to 1600µs Power supply :- Rechargeable lithium-ion Operation time :- 8 hours or more Display :- 7 inch LCD touch panel Conformity standard :- IP 52 Preamplifler Integrated Sensor Sensitivity setting :- 20 steps Power supply :- Rechargeable lithium-ion "Operation time :- Wireless mode/8 hours, Loger mode/24 hours" Conformity standard :- IP 68 |
| 454 | Provision for procurement of Digital Noise Reduction Water Leak Detector which detects the leak sound digitally and reduce traffic noise and others disturbning leak detection work to find leaks in noisy environments during the day etc with the following features and specifications all complete as per direction of Engineer-charge. (Make- Fuji/Guterman/Xylem) FEATURES "Noise reduction system :- Eleminates unnecessary traffic noise, impact sound, the footstep should removed." "LCD :- The level fluctuation, filter setting, simultaneously displayed, recorded noise level value should displayed, level value transition displayed in the graph." "Leak noise level recording function :- Data of 250 places to be recorded in the memory of main unit." "Notch filter :- Notch filter should be there to reduce A/C hum from transformer power line" "Data output by USB terminal :- The stored minimum noise level value to be forwarded to PC easily and quickly by connecting USB terminal" "Dustproof and water resistant structure :- Dustproof and water resistant function should be equipped even if light rain and water splash on the site " SPECIFICATION "Main unit Total sensitivity :- 900 V/G or higher (400Hz)" "Filter :- Low pass : Thr, 100,200,400HZ :- High pass : 400, 600, 800, 1200, 2200Hz :- Notch filter : 50Hz, 60Hz OFF" Saved data :- Minimum level value, data No., date/hour, flag point Number of save file :- 250 Power supply :- Alkali C-size (LR14) batteryx4 Continuous working time :- 24 hours or longer Working temperature range :- 20oC to +55oC Conforming standard :- IP52 equivalent "Pick-up Type :- Piezoelectric-type" Conforming standard :- IP67 equivalent (water depth 1m, 30 minutes) Power supply voltage :- 3.3V DC |
| 455 | Provision for procurement of pipeline and cable locator with vibratory system and LED lighting etc. all complete as per following features and specifications all complete as direction of Engineer-in-charge. (Mame-Fuji/Guterman/Xylem) FEATURES Point of buried pipe to be indicated by vibration and lighting Data to be transferred to smart phone for making operating reports by bluetooth Transmitter to be automatically switch to direct mode Bluetooth connection to be available also Power supply :- Transmitter-Dx4, Receiver-AAx6 SPECIFICATION Frequency :- 8kHz,27kHz, 83kHz "Transmitter output power :- Induction model:0.5W Direct Model : 3W" "Loop check :- Impendance: 1-10 ? Phase display : -179o-180o Frequency : 512Hz" "Detection Method :- Maxmum method Bar method Sound" "Depth measurement method :- Traverse method Pull up measurement" "Depth measurement range :- Pull up 0-5 m Traverse 0-2 m" Operation Temperature :- -10 - +55oC Wireless : BluetoothVer.2.1 Class 2 SPP Profile |
| 456 | Provision for procurement of listening stick-1.0m for point check house connection and valve survey with following specification etc all complete as per direction of Engineer-in-charge. Type - LSP 1.0 Head size - ?67x29(mm) Total Length - 1011mm Bar diameter - ?7mm Material - Stainless Steel |
| 457 | Provision for procurement of listening stick-1.5m for point check house connection and valve survey with following specification etc all complete as per direction of Engineer-in-charge. Head size - ?67x29(mm) Total Length - 1511mm Bar diameter - ?7mm Material - Stainless Steel |
| 458 | Provision for procurement of Sensor based water leak detector for one handed operation with following features and specifications etc all complete. (Make Fuji/Guterman/Xylem) FEATURES Compact amplifier with mute switch Water leak detection applications including leak surveys and leak pinpoint, use the optional magnet base or the contact rod for leak survey at hydrants, valves & meters. Extremely compact and lightweight, inside aluminum carrying case Specifications "Amplifier Amplification :- 56.0dB + 3dB" Power consumption :- 20.0mA or less Frequency character :- 100 ~ 1000 Hz Operation temperature :- -5oC ~ + 55oC Power source :- UM-3 or AA Dry Cell Batteries (1.5Vx2) "Pick-up Element :- Piezoelectric element" "Sensitivity :- 1.00V/g at 400Hz (Max.) Headphone" "Impedance :- 20ohms(mini-stereo headphone) Aluminum carring case" |
| 459 | "PART-B - TRAINING OF OFFICIALS & STAFF" Training for releant department officials for the water leakage detection, understanding & working of devices, leak noise correlators, Ground geophones, listening sticks, Metal pipe locator etc. by certified expert from manufacturer of the device for 12 working days per month for 6 months. |
| 460 | 12 working days per month for 6 months |
| 461 | Automation&Instrumentationwork(SCADA &PLC,Flow meter, Actuator, Pressure transmeter, Level Controller, Soft Starter, External Electrification etc) (Rising Main, DMA-1, DMA-2 & DMA-3) |
| 462 | Supply & installation of PLC base control Panel at Raw water pumping main for auto/manual operation of Pump & motors including remote: monitoring of process live data of instruments like Status of Pump, river level, flow pressure etc with following technical specifications: Enclosure: 1500 x 400 X 1500MM-01 NOS HMI: Schneider HMI GMU 12" 01 NOS RELAY CARD 24VDC 8CH-01 NOS PANEL LIGHT-01 NO PLC Panel With PLC Schneider M200/221-01 NOS. AI CARD: SCHNEIDER 8 CH-01 NOS SMPS: 10A-01 NOS MCB DP 10A-10 NOS Panel Cooling Fan-01 NO TB-100 terminal Wiring With PVC Duct & C-Channel-01 SET GLAND PLATE With 10 nos Fibre Glands- 01 SET |
| 463 | Supply & installation of full-bore type electromagnetic water flow meter at raw water rising main for monitoring volume of water flow to WTP, with following technical specification: Basic Model-DN 250 10" technical specification: Basic Model-DN 250 10" Liner:- Hard rubber Process Connection:- PN10,St37-2/FE 410W B, flange EN1092 Electrodes:- 1.4435/3161 Calibration: 0.5% Approval: Non-hazardous area Housing Field Alu, Sensor IP68 NEMA6P Cable, Remote Version: 20 m coll and signal cable Power Supply: Display:20-28VAC/11-40VDC:2-line, push buttons Make-E & H, KROHNE MARSHALL & ABB 3 |
| 464 | Supply & installation of Pressure Transmitter at raw water rising main with following technical (0-10 kg/cm2) Housing material: Stainless Steel(AISI316L)/Output: 4-20 mA/Process connection: DIN EN 175301-803ACONNECTION 1/2"BSP(M) CABLE ENTRY TERMINAL BOX RANGE0-10 BAR PIWER SUPPLY 24 VDC INGRESS PROTECTION IP65 MAX. TEMP 70 DEG C Make-E&H, ABB & VEGA |
| 465 | Supply & installation of RADAR base river level Transmitter at raw water intake well for real time monitoring of water level of river with following technical Specification: - Range- (0 to 20 mtr ) Type : Non- Contact Radar Level Range : 0-20 Meters Beam Angle :+/- 2mm whendistance < 10 Meter +/-0.02% when distance > 10 Meter Repeatability :+/- 1mm Resolution : 1mm Housing : SS 316LWetted Part : SS 316L & PP Process Connection : Bottom Housing:G 3 ATop of Housing:G 1 A Power Supply : 12-30 V DC Output : 4-20mA HART Ingress Protection : IP 68Make- VEGA, KROHNE MARSHALL" |
| 466 | Supply & installation of wireless data communication system RADIO bae at raw water intake well with installation of mast for required height for point to point communication with WTP for remote monitoring of process data of raw water pumping main. Make : SIEMENS (Only) |
| 467 | Supply & Installation of insertion type water Quality analyser with all accessories , mounting bracket with required cable to be installed at raw water open channel with following tevhnical specification :-(A)-pH AnalyserMeasurement range-pH 0 to 14 Process temperature-0 to 135 C (32 to 275 F) Process pressure-1 to 17 bar (15 to 246 psi) (B)- Turbiditry AnalayserMeasurement range-0.000 to 4000 FNU Process temperature- Stainless steel version: -20 to 85 C (0 to 185 F) Proces pressure-Stainless steel : 0.5 to 10 bar abs( 7.3 to 145 psi abs) |
| 468 | Supply & installation of Open channel flow meter to be installed at WTP open channel for monitoring water flow to clarifier with following technical specifications:- Level, ultrasonic, contactless. Application : liquids, solides. Sensor: pvdf.Measuring trange:3m/9ft (liquid), 1.2m/3ft (solid) TemperatureP: -40…80oC/176oF. Pressure: 4bar/60psi abs. Blocking distance : 7cm/0.3FT. Proction class IP68 NEMA6P Self clening effect of sensor membrance. |
| 469 | Supply & installation of LOH (Loss of Head)indicator with disply unit at filter house for auto wash of filter bed with following technical specification: Housoing : Cast Aluminium , Powder Coated. 198*170*99 mm Mounting : wall Mounting Power Supply : 230/110 V AC , 50Hz Power Consumption : 4 VA (approximately) Adjustment Range : Span : Min 10% pf Electrode Length Max 80% of Electrode Length Alarm : A relay C/O rated 6 Amps 230 V, non- inductiveloadadjustable throughout range Current outpou : 4-20m A DC non isolated, max. load resistance 600 Ohms, correspondinf to differebtial levelAccuracy : +- 4%of Electrode Length 2. Loss of Head (LoH) Can be supplied with Rate of Flow (RoF) in a common Ca Housing with IP-55Protection |
| 470 | Supply & installation of DI valve with Actuator with following technical specification as a part of auto wash of filter bed : - Water Tight to ip 68. IP68 to IEC 529 Naturally cooled. Motor Date:a) Voltage / Phase / Frequencyb) Admissible voltage fluctuation c) Admissible Frequency flucation d) Admissible voltage & frequency filuation 715V, 3 phase, 50Hz Actuator Plint RAL 7004 |
| 471 | 100mm |
| 472 | 150mm |
| 473 | 250mm |
| 474 | 300mm |
| 475 | Supply & installating of Ultrasonic water level transmitter at wash water& clear water sump for monitoring water level as a part of automation of WTP with following technical specification. Level, ultrasonicv, contactless. Applixation : liquids, solids. Sensor: PVDFBlocking distance : 35cm/1.1ft. lncl. Setup-/diagnostic software Self cleaning effect of sensor membrance. :: Application safety: independent of dielectricity/ density. |
| 476 | Supply & installation pf PLC base control Panel at Clear water pumping main for auto /manual operation of Pump & motors including remote monitoring of process live date of instruments like status of Pump , sump level, flow pressur etc with following technical specification:- PLC Panel With Enclosure: 1500 x 400 x 1500MM -01 NOS PLC: Schneider M200/221-01 NOS AI CARD: SCHNEIDER 32 CH-04 NOS RELA CARD 24 VDC 8CH-04 NOS SMPS: 10A-01 NOS MCB DP 10A-10 NOSPanel Cooling Fan-01 NO |
| 477 | Supply & installation of SCADA station at WTP site Destop for SCADA Server (with Window 10) 1500 TAG SCADA Software Supply of power , instrumentation & Networking Cable. Cable Laying. 65" Digital Display unti Industrial PC Development of SCADA software as per this site requirment &direction of enginner in charge. |
| 478 | Supplying all materials, labour, t&p and fixingof PLC CompatableATV930- VFD , HEAVY DUTY 145 AMP, WITH BREAKING UNIT VFD floor mounted Control Panel made out of 2MM C.R Powder coated sheet & alluminium BusBar interconnected with copper wire and lugsh having50KA -125AMCCB including spreader link and extended ROM-1No, RYB indicator -1set, digital ammeter- 1 No, digital volt meter- 1No,4A control MCB - 3Nos, CT100/5A - 3Nos,6A DP MCB-1No, AC-3- 140A power contactor-1No, 135A main 200-525Vac, CTR 110-240 VAC Softstarter (EMX4i) -1No, Axuilary contactor 2NO+2NC -2Nos, Start/stop/reset push Buttom- 1 Set, ON/OFF/TRIP Indictor - 1set, Cooling Fan - 1 no, make-(Siemens, schneider,ABB, L&T, LEGRAND) including testing with lead of all materials to site. |
| 479 | 97 KW VT Pump VFD |
| 480 | 60 KW VT Pump VFD |
| 481 | Supply & Installation of WQA (water quality analyser) panel with following parameters to be installed at Clear water rising main within the premises of WTP site:- 1.) Measurement Range:- i) Turbidity: 0 to 10 NTU ii) Color : 0 to 20 TCU iii) Free Residual Chlorine : 0 to 5 PPM iv) pH: 2 to 12 pHv) Water Pressure: 0 to 1,000 us/cm vii) Water Temperature: 0 to 50 C |
| 482 | Supply & installation of UPS at different location at Raw water intek well& WTP a with following as per direction of engineer in- charge. Autometic self-test Disconnected battery notificationWarns when a battery is not available to provide backup power. Audible alarams Provides notification of changing utiluty power and UPS power conditions:- Predicative failure notifaction . Provides early-warning fault analysis ensuring proactive component replacement . User-replaceble batteries increases availabillty by allowing a trained user to perform upgrades and replacements of the batteries reduing ,Mean Time to Repair (NTTR) Make-Hi-Rel,APC" |
| 483 | Supply & intallation of Lighting arrestor with surge protection at Raw water intek well, WTP |
| 484 | Supplying & laying of Data Cable (2 wire screen copper cable .75 mm2 ) |
| 485 | Supplying & laying of Data cable (7 core screen copper cable .75mm2) |
| 486 | Supplying & laying of power cable 3 core 2.5mm 2 |
| 487 | HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge. (excluding earth work) |
| 488 | Laying HDPE Pipe by HDD method using HDD machine upto 90mm dia including hire charge of HDD machine, operator, POL lubricant etc |
| 489 | Desiging, supplying, installing, commissioning & testing of CCTV IR water proof camera suitablefor upto100ft. with IR Dome camera, control key board, DVR, Hard Disk, cables, UPT transreceivers etc. complete. |
| 490 | AUTOMATION |
| 491 | PART-I:- Installation of Bulk Water Meter system |
| 492 | Supply Fitting, fixing & commissioning of following dia bulk eletromagnetic water meterwith the development of the application for monitoring and reporting(in .xlsx format & GUI) the LIVE data of total flow and pressure in each area of the water distribution channel and integrate the application with an existing PHEO application. (Application: The PHEO is having one existing application in the platform of LINUX, PHP, MySQL, JAVA script, HTML, CSH, AJAX, J-Query). All complete as per direction of Engineer in charge. CWTM DMA-1, DMA-2, DMA-3 |
| 493 | 200mm dia Full bore type Electro Magnetic Water Flow meter |
| 494 | Supplying, Fitting,Commissioning,Fixing double / single chamber DI PN 16 control valve,hydraulically operated, single diaphragm actuated, globe pattern. The valve shall consist of three major components; the body with the seat installed; the cover with the bearing installed and the diaphragm assembly. The diaphragm assembly shall be the only moving part and shall form a sealed chamber in the upper portion of the valve, separating the operating pressure from line pressure. Packing glands, stuffing boxesand there shall be no piston operating the main valve or pilot controls. No fabrication or welding shall be used in the manufacturing process.The control will be achieved by operating of 2 number Solenoid Valves mounted on the main Valve, electronic timer controller, Timer, integral oriface plate assembly, differential control, reverse flow control, restriction orifice. The Connecting tubing on the Main Valve will be SS with SS fitting from reputedmake. The valve shall be working up to 3.0 kg/cm2 operating pressure Body A216 WCBintegrated with PLC pannel for operation (local/remort and web enabled with command and control) make CLA/ SINGER/ VAG to control water supplyincluding the cost of valve cutting the pipeline & making good to the damagesincludingcost ofall labours, T&P etc. all completeas per the direction of Engineer-in-charge. |
| 495 | CWTM OZ-1, OZ-2 & OZ-3 |
| 496 | 200mm DiaPN16 Flow Control Valve with 2 nos solenoid |
| 497 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 498 | Supplying all labour, material, tools & plants for dismantling of bituminous courses of flexible pavements and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, all complete as per specification and direction of Engineer-in-charge. |
| 499 | Supplying all materials, labour, tools & plants for cutting ofmettaledroad for laying of pipeline including conveyance of all material at work, etc. all complete as per specification and direction of the |
| 500 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 501 | Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipeas per specifications including testing with cost of all jointing materials, transportation to site etc. all completeas per the specifications and directions of Engineer-in-charge. |
| 502 | 200mm dia MJ Socket |
| 503 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specificationof following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 504 | 373.0mm ODM.S.Pipe 6.4mm thick |
| 505 | Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete |
| 506 | Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes upto 8mm thickand fittings at site by using welding generator including testing of joints, as per specification complete |
| 507 | Supplying all materials, labour and T&P for making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of E.I.C. |
| 508 | Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete |
| 509 | Supplying all materials, labour T&P for construction of RCCValve chamber of following internal sizes having earth work in excavation in all kinds of soil, 150mm sand filling ,150mm PCC (1:3:6), 200mm thick base, wall & cover slab with RCC 1:1½:3, fixing factory made precast SD20 Frame & cover slab, foot step iron etc all complete. |
| 510 | Internal Size=1.20m.x1.20mx 1.20mtrwith SFRCcover 1.20mx1.20m (Outer) |
| 511 | Supply of Pressure transducer to be installed at 250 mm dia delivery main with following technical specification :- i.e. Range up to 10 kg/cm2, Type-Sensor, Power Supply-24 DC, Out put-4 to 20mA, Make-E & H/ABB/VEGA with SS 316 grade sensor niddle valve with bypass tube |
| 512 | Supply Fitting, fixing & commissioning of following diaPilot Altitude valvefor purpose to close valve at a maximum water level of ESR& to open to refill the ESR when the water level in the ESR at lowers.Altitude Control Valve should be worked at minimumpressure1kg/cm2 .An altitude control valve controls the level of a tank. The altitude valve will remain open while the tank is not full and it will close when the tanks reaches its maximum level. The opening and closing of the valve will work without external power source (electric, pneumatic, or man power), it will workautomatically, The body, Spool,& cover will be DI ASTM A-536 standard, Spring, steam, Jam Nut, Cover bolt & cover washer should be SS, DI /SS Diaphragm plate, Nytril/Nylon diaphragm, Bronze cover bushing, Seat plate & ring. Make - (VAG/SINGER/CLA/BURMAD) |
| 513 | CWTM OZ-1, OZ-2 & OZ-3 |
| 514 | 200mm Dia |
| 515 | PART-II:- Laying & Installation of OFC system |
| 516 | Cutting of cement concrete road for repair/laying of water supply line pipe removal of debries by Tractor-trolley including,transportation,all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 517 | Cutting of Asphalt road for repair/laying of water supplypipe line removal of debries by Tractor-trolley including,transportation,all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 518 | Mending with Plain cement concrete (1:2:4) with 12mm size crusher broken hard Granite chips including cost of all labour and materials with all taxes,lead,T & P etc all complete. |
| 519 | HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.(excluding earth work) |
| 520 | Supply and Installation of pre-fabricated GRP Joint Box with lid size 600 x 600 x 600 mm for OFC loop and termination including labour as per telecom specification and directions of Site Engineer / Engineer-in-Charge. |
| 521 | OFC: Supply and Laying of 12 core unarmoured Optical fibre cable ( OFC. Fiber glass with F-G 62.5/125micron, 2.6DB/KMF600) to various sites through HDPE pipe /in Air ( pole to pole ), prelaying testing of each cable drum for each fibre and tahing the OTDR traces,submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/Site Engineer. |
| 522 | Supply and Installation of OFC jointing kits as per drawings,specificationsanddirections of Engineer-in-charge/Site Engineer. |
| 523 | Laying HDPE Pipe by HDD method using HDD machine upto 90mm dia including hire charge of HDD machine, operator, POL lubricant etc |
| 524 | PART-III:- Installation of Chlorination System |
| 525 | Provision for supplytesting & commissioning of chemical Booster pump 7m3/hr, H-40 M,0 to 100m³/Hr in proportion to 4 to 20 mA signal. 100 SPM @ 75 HZ and 67 SPM @ 50 HZ. Motor Frequency Range = 15 to 75 Hz Auto/Manual, Remote, while running or at rest, 5:1 Turn Down Ratio, Over & above there will be provision for manual stroke variation.The Disch piping & fittings starting from the pump flange upto the tank nozzle including VFD 3 Phase input and 415 V 3 Phase output . Inverter will receive a signal of 4 to 20 mA and will vary the RPM of the motor in proportion to the same, thus controlling the pump capacity. Pump will also have the provision for manual stroke adjustment. Connection between the Inverter & pump together with the Instrument for generating 4 to 20 mA signal witheletrical installation etc all complete. |
| 526 | 1set=2 nos dosing pump (1 no working + 1 no standby) |
| 527 | Installation charges including all piping arrangement & hire charges of Hydra etc all complete |
| 528 | Supplying of control panel with VFD for running of the above chlorine dosing pump and motor etc all complete as per direction of Engineer-in-Charge. |
| 529 | Supply of Online Chlorine Analyser with following technical specification:- i.e.Single Channel free Chlorine Analyser, Transmitter-Aqua4trans Dual Channel, FRC sensor FMNSX5 with 10 feet cable (with manual PH compensetion), Complete system premounted on plate with FTCs foe sensors, Power supply 110-240VAC, Trans 2" pipe/wall /Panel mount type, Range FRC-0-5 ppm, Complete plate mounted system, (The Analyzer must be pre wired on plate, we will provide only power supply & pipe connection system) |
| 530 | Charges for installation, Testing & commissioning ofOn line Chlorine Analyser . |
| 531 | Supplying all materials, labour, t&p and fixing Gas Chlorinator (Capacity-4 kg/hr) for Post chlorination with Vaccume Regulator, Scale controller, Injector, Connectors & vaccume includinginstallation & commissioning with lead of all materials to site. |
| 532 | Supplying all materials, labour, t&p and fixing Chlorine Gas scrubber with Na OH tank, pumps (1W+1 S) piping,valves and instrument For safety handling including cost of materials with including installation & commissioning with lead of all materials to site.. |
| 533 | Supplying all materials, labour, t&p and fixing Chlorine Tonner suitable for storing 910 kg Chlorine for Pre and Post chlorination having test certificate including installation & commissioning with lead of all materials to site. |
| 534 | Supplying all materials, labour, t&p and fixing 5 tonne capacity EOT crane of Capacity , Approx span :12 m, Type – Suspended, Worm / Spur gear , Range of lifting – 0 to 8 m, Load Chain – Alloy steelfor singleGirdar with support as per IS 3109 / 6216, Hand Chain – IS 2429 / BS 6405 includinginstallation, testing & commissioning with lead of all materials to site.. |
| 535 | Supplying all materials, labour, t&p and fixing exhaust fan of Capacity - 1500 cfm with ss vent hood ofindustrial grade including installation & commissioning with lead of all materials to site.. |
| 536 | External Lightning Protection System |
| 537 | PART-IV:- Installation of Automation System |
| 538 | Supply,Installation & Commissioning of SCADA software 40 I/O (Make-Schiender/Simens/Fox) with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language including supply,installations of Desk top PC, Modem for receiving data, UPS etc all complete Including licence Key. |
| 539 | Supply, Installation, Testing,Programming, Wiring & CommissioningofPLC panel Made out of 2 MM C.R sheet,PLC Pannel with encloser size 800x600x2100mm Duely Powder coated, Wall mounted/floor standing, Front operated, complete with interconnection with copper wire and lugs.(Make-Rittal,BCH,Hoffman)Having Type 2-1P+N 15kA Surge protection device- 1Nos ,32A 15KA MCB - 1 nos, DC powered Transistor/Relay based24DI and 16DO EthernetPLC Module, 35 Micosecond Response time for DI/DO Switch on/off, 8ch Analog input module- 2 Nos having 1ms per channel conversion/sampling time. 4ChAnalog Output module - 2 Nos having 1ms per channel conversation/ stabilisation time. Ambient air tempature upto 55 "C.10"" W touch Panel display having 2 ethernet, Usb host&device 24VDC type- 1 Nos (Make- Siemense ,Schneider-,Allen Bradly).Rated DP Separate DC MCB for Indivisual Modules.. 24dc 1C/O type slim Relay with Led for Digital out put - 16 Nos (make-wago,phoenix contact). 5 Ch Unmanaged Industrial Grade Switch- 1 Nos. (Make- wago,schneider,siemense,Allen Bradley) .4G ethernet TCP/IP-Modbus Industrial Grade GSM Router -1 Nos (make- Robustel,Teltonika). 1.5 mmFuse TB with 0.5A glass fuse with Fuse blown indicator type Terminal Block for Digital Input/analog output- 60. 1.5 mm Terminal block for Digital Output - 40Nos. (Make- wago,Phoenix Contact). 24VDC powered signal isolator for Analog Input - 16 Nos. (Wago,Phoenix), 24 Vdc 6Amp redundent Power supply Unit with input and output DC MCB - 2Nos ( Make- Wago,Phoenix Contact,Siemens,Schneider), Color Coded Terminal Blocks for AC/DC/earth Bus/TB- 50 Nos.(Make- Wago,Phoenix Contact,Connectwell),2/4/6 Amp AC/DC MCB- 6nos All switchgear and controlgear make- Siemens,schneider,ABB,L&T.All completed asper electrical specification and as per direction of EIC. |
| 540 | Type 2-1 P+N 15KVA Surge protection device |
| 541 | Supply, Installation, Programming, Testing& Commissioningof1KVA Online UPS with 08Hr Battery Backup System, Having Double conversion IGBT based online UPS system with builtin Isolation Transformer, Input 150-250VAc 1Phase,50Hz, output: 230 VAC,1Phase,50Hz. Drytype 3 nos Battery 42AH with MS Rack . All completed asper electrical specification and as per direction of EIC. |
| 542 | Supplying all materials, labour, T&P for fitting of PLC panel as per electrical specification |
| 543 | 1.5 sqmm 8 core armoured copper cable |
| 544 | 1.5 sqmm 3 core armoured copper cable |
| 545 | 0.75sqmm 2 core armouredInstrument(Screen cable) |
| 546 | CAT-6 Dlink cable |
| 547 | Cable Gland-25 mm |
| 548 | Cu.logs-1.5/2.5 |
| 549 | Supply, installation of chemical earthing withcrystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all completeas per the site requirement. |
| 550 | 4U wall-mount Rack/Cabinet shelf or self-standing & is great for organizing your DVR-NVR-Server-Network devices. 4U rack has a key lock feature for keeping your device safe in this cabinet. This rack is made with the highest care while making it. Since making its quality, best, 6-way processed powder coating is done for long-lasting, Corrosion and Rustproof. Top and bottom cable entry provides optimal flexibility for cable management. It also has 4 Power sockets surge protector and 1 AC AXIAL cooling Fan attached in it. Rack size: 45 X 55 X 25.5 CM. Weight: 9.20 kg. Colour: Gray. Package Contains 1 Rack, Screws, Nylon Sleeves, 2 Keys. |
| 551 | Gigabit SFP to RJ45 Fiber multi Media Converter | Fiber to Ethernet Converter | 10/100/1000Mbps RJ45 Port to 1000Base-LX Dual-Mode Fiber(Make - Dlink or equivalent) |
| 552 | 24 port fiber optic panel or light interface unit drawout Type |
| 553 | OFC Splicing with pigtails |
| 554 | Configuration of Electro Mechanical Instrument to PLC and Server level with data acquistion at interval of every 5 second including monitoring and command control from remote place Total No of Instruments |
| 555 | Optical fiber 16-port managed L3 gigabit fiber switch and media coverter for non-blocking throughput switching, high performance and low latency, Gigabit Ethernet SFP and RJ45 ports (Make- Digisol- SG-GS4600FSE or equivalent |
| 556 | Fiber SFP Multi mode transicever 100 base LC type module |
| 557 | SM(OS2) Duplex Patch cord 3mtr LC-SC,PC type |
| 558 | Fiber Pigtail/patchcord 1 mtr |
| 559 | AUTOMATION DMA-1 |
| 560 | PART-I:- Installation of Bulk Water Meter system |
| 561 | Supply Fitting, fixing & commissioning of following dia bulk eletromagnetic water meterwith the development of the application for monitoring and reporting(in .xlsx format & GUI) the LIVE data of total flow and pressure in each area of the water distribution channel and integrate the application with an existing PHEO application. (Application: The PHEO is having one existing application in the platform of LINUX, PHP, MySQL, JAVA script, HTML, CSH, AJAX, J-Query). All complete as per direction of Engineer in charge. |
| 562 | 100mm dia Full bore type Electro Magnetic Water Flow meter |
| 563 | 150mm dia Full bore type Electro Magnetic Water Flow meter |
| 564 | Supplying, Fitting,Commissioning, Fixing double / single chamber DI PN 16 control valve,hydraulically operated, single diaphragm actuated, globe pattern The valve shall consist of three major components; the body with the seat installed; the cover with the bearing installed and the diaphragm assembly. The diaphragm assembly shall be the only moving part and shall form a sealed chamber in the upper portion of the valve, separating the operating pressure from line pressure. Packing glands, stuffing boxesand there shall be no piston operating the main valve or pilot controls. No fabrication or welding shall be used in the manufacturing process.The control will be achieved by operating of 2 number Solenoid Valves mounted on the main Valve, electronic timer controller, Timer, integral oriface plate assembly, differential control, reverse flow control, restriction orifice.The Connecting tubing on the Main Valve will be SS with SS fitting from reputedmake. The valve shall be working up to 3.0 kg/cm2 operating pressure Body A216 WCBintegrated with PLC pannel for operation (local/remort and web enabled with command and control) make CLA/ SINGER/ VAG to control water supplyincluding the cost of valve cutting the pipeline & making good to the damagesincludingcost ofall labours, T&P etc. all completeas per the direction of Engineer-in-charge. |
| 565 | 100mm DiaPN16 Flow Control Valve with 2 nos solenoid |
| 566 | 150mm DiaPN16 Flow Control Valve with 2 nos solenoid |
| 567 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 568 | Supplying all labour, material, tools & plants for dismantling of bituminous courses of flexible pavements and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, all complete as per specification and direction of Engineer-in-charge. |
| 569 | Supplying all materials, labour, tools & plants for cutting ofmettaledroad for laying of pipeline including conveyance of all material at work, etc. all complete as per specification and direction of the |
| 570 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 571 | Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipeas per specifications including testing with cost of all jointing materials, transportation to site etc. all completeas per the specifications and directions of Engineer-in-charge. |
| 572 | 100mm dia MJ Socket |
| 573 | 150mm dia MJ Socket |
| 574 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specificationof following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 575 | 219.10mm ODM.S.Pipe 6.3mm thick |
| 576 | 373.0mm ODM.S.Pipe 6.4mm thick |
| 577 | Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete |
| 578 | Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes upto 8mm thickand fittings at site by using welding generator including testing of joints, as per specification complete |
| 579 | Supplying all materials, labour and T&P for making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of E.I.C. |
| 580 | For Installation of Flow meter 100 mm |
| 581 | For Installation of Flow meter 150 mm |
| 582 | Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete |
| 583 | Supplying all materials, labour T&P for construction of RCCValve chamber of following internal sizes having earth work in excavation in all kinds of soil, 150mm sand filling ,150mm PCC (1:3:6), 200mm thick base, wall & cover slab with RCC 1:1½:3, fixing factory made precast SD20 Frame & cover slab, foot step iron etc all complete. |
| 584 | Internal Size=0.90m.x0.90mx 1.20mtrwith SFRCcover 1.20mx1.20m (Outer) |
| 585 | Supply of Pressure transducer to be installed at 250 mm dia delivery main with following technical specification:-i.e.Range up to 10 kg/cm2,Type-Sensor,Power Supply-24 DC,Out put-4 to 20mA,Make-E & H/ABB/VEGA.with SS 316 grade sensor niddle valve with bypass tube |
| 586 | PART-II:- Laying & Installation of OFC system |
| 587 | Cutting of cement concrete road for repair/laying of water supply line pipe removal of debries by Tractor-trolley including,transportation,all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 588 | Cutting of Asphalt road for repair/laying of water supplypipe line removal of debries by Tractor-trolley including,transportation,all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 589 | Mending with Plain cement concrete (1:2:4) with 12mm size crusher broken hard Granite chips including cost of all labour and materials with all taxes,lead,T & P etc all complete. |
| 590 | HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.(excluding earth work) |
| 591 | Supply and Installation of pre-fabricated GRP Joint Box with lid size 600 x 600 x 600 mm for OFC loop and termination including labour as per telecom specification and directions of Site Engineer / Engineer-in-Charge. |
| 592 | OFC: Supply and Laying of 12 core unarmoured Optical fibre cable ( OFC. Fiber glass with F-G 62.5/125micron, 2.6DB/KMF600) to various sites through HDPE pipe /in Air ( pole to pole ), prelaying testing of each cable drum for each fibre and tahing the OTDR traces,submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/Site Engineer. |
| 593 | Supply and Installation of OFC jointing kits as per drawings,specificationsanddirections of Engineer-in-charge/Site Engineer. |
| 594 | Laying HDPE Pipe by HDD method using HDD machine upto 90mm dia including hire charge of HDD machine, operator, POL lubricant etc |
| 595 | PART-III:- Installation of Chlorination System |
| 596 | Provision for supplytesting & commissioning of chemical Booster pump 7m3/hr, H-40 M,0 to 100m³/Hr in proportion to 4 to 20 mA signal. 100 SPM @ 75 HZ and 67 SPM @ 50 HZ. Motor Frequency Range = 15 to 75 Hz Auto/Manual, Remote, while running or at rest, 5:1 Turn Down Ratio, Over & above there will be provision for manual stroke variation.The Disch piping & fittings starting from the pump flange upto the tank nozzle including VFD 3 Phase input and 415 V 3 Phase output . Inverter will receive a signal of 4 to 20 mA and will vary the RPM of the motor in proportion to the same, thus controlling the pump capacity. Pump will also have the provision for manual stroke adjustment. Connection between the Inverter & pump together with the Instrument for generating 4 to 20 mA signal witheletrical installation etc all complete. |
| 597 | 1set=2 nos dosing pump (1 no working + 1 no standby) |
| 598 | Installation charges including all piping arrangement & hire charges of Hydra etc all complete |
| 599 | Supplying of control panel with VFD for running of the above chlorine dosing pump and motor etc all complete as per direction of Engineer-in-Charge. |
| 600 | Supply, of On line Chlorine Analyser with following technical specification:- i.e.Single Channel free Chlorine Analyser,Transmitter-Aqua4trans DualChannel,FRC sensor FMNSX5 with 10 feet cable(with manual PH compensetion),Complete system pre mounted on plate with FTCs foe sensors,Power supply110-240VAC,Trans 2" pipe/wall /Panel mount type,RangeFRC-0-5 ppm,Complete plate mounted system,(The Analyzer must be pre wired on plate,we will provide only power supply & pipe connection system) |
| 601 | Charges for installation, Testing & commissioning ofOn line Chlorine Analyser . |
| 602 | Design, engineering, procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and painting at manufacturer’s works, packing, supply, unloading /transportation/ handling/storage at site, assembly at site, installation including touch-up painting, hook-up, pre-commissioning, commissioning, inspection and testing of the complete of the following capacity(Prime Power) DG sets along with AMF Panels, Acoustic enclosure, supply of all erection & commissioning spares, special tools and tackles (as required),instrumentation, allAuxiliaries, Exhaust system& silencer, Fuel Tank, Fuel piping , cable of required size, 2 nos earthingfor DG set, required foundation, good quality(L& T or equivalent) , change over,meetering panel, with CT Meter, all complete etc. with inspection certificate from electrical inspector and as as per site condition & direction of Engineer in charge. |
| 603 | 15KVA three phase DG set Disel operated having automatic feeder panel with display contoller which can communicate oil level , engine temperature, voltage, current,, battery voltage,frequency hour meter, engine oil temp & should be liquid cooled engine. The controller should be fixed on a separate wall with connecting cable upto 15 mtr |
| 604 | External Lightning Protection System |
| 605 | PART-IV:- Installation of Automation System |
| 606 | Supply,Installation & Commissioning of SCADA software 40 I/O (Make-Schiender/Simens/Fox) with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language including supply,installations of Desk top PC, Modem for receiving data, UPS etc all complete Including licence Key. |
| 607 | Supply, Installation, Testing,Programming, Wiring & CommissioningofPLC panel Made out of 2 MM C.R sheet,PLC Pannel with encloser size 800x600x2100mm Duely Powder coated, Wall mounted/floor standing, Front operated, complete with interconnection with copper wire and lugs.(Make-Rittal,BCH,Hoffman)Having Type 2-1P+N 15kA Surge protection device- 1Nos ,32A 15KA MCB - 1 nos, DC powered Transistor/Relay based24DI and 16DO EthernetPLC Module, 35 Micosecond Response time for DI/DO Switch on/off, 8ch Analog input module- 2 Nos having 1ms per channel conversion/sampling time. 4ChAnalog Output module - 2 Nos having 1ms per channel conversation/ stabilisation time. Ambient air tempature upto 55 "C.10"" W touch Panel display having 2 ethernet, Usb host&device 24VDC type- 1 Nos (Make- Siemense ,Schneider-,Allen Bradly).Rated DP Separate DC MCB for Indivisual Modules.. 24dc 1C/O type slim Relay with Led for Digital out put - 16 Nos (make-wago,phoenix contact). 5 Ch Unmanaged Industrial Grade Switch- 1 Nos. (Make- wago,schneider,siemense,Allen Bradley) .4G ethernet TCP/IP-Modbus Industrial Grade GSM Router -1 Nos (make- Robustel,Teltonika). 1.5 mmFuse TB with 0.5A glass fuse with Fuse blown indicator type Terminal Block for Digital Input/analog output- 60. 1.5 mm Terminal block for Digital Output - 40Nos. (Make- wago,Phoenix Contact). 24VDC powered signal isolator for Analog Input - 16 Nos. (Wago,Phoenix), 24 Vdc 6Amp redundent Power supply Unit with input and output DC MCB - 2Nos ( Make- Wago,Phoenix Contact,Siemens,Schneider), Color Coded Terminal Blocks for AC/DC/earth Bus/TB- 50 Nos.(Make- Wago,Phoenix Contact,Connectwell),2/4/6 Amp AC/DC MCB- 6nos All switchgear and controlgear make- Siemens,schneider,ABB,L&T.All completed asper electrical specification and as per direction of EIC. |
| 608 | Type 2-1 P+N 15KVA Surge protection device |
| 609 | Supply, Installation, Programming, Testing& Commissioningof1KVA Online UPS with 08Hr Battery Backup System, Having Double conversion IGBT based online UPS system with builtin Isolation Transformer, Input 150-250VAc 1Phase,50Hz, output: 230 VAC,1Phase,50Hz. Drytype 3 nos Battery 42AH with MS Rack . All completed asper electrical specification and as per direction of EIC. |
| 610 | Supplying all materials, labour, T&P, for fitting of PLC panel as per electrical specification |
| 611 | 1.5 sqmm 8 core armoured copper cable |
| 612 | 1.5 sqmm 3 core armoured copper cable |
| 613 | 0.75sqmm 2 core armouredInstrument (Screen cable) |
| 614 | CAT-6 Dlink cable |
| 615 | Cable Gland-25 mm |
| 616 | Cu.logs-1.5/2.5 |
| 617 | Supply, installation of chemical earthing withcrystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all completeas per the site requirement. |
| 618 | Supply of Level indicator to be installed at ESR with following specification Range=0 to 8mtrType =Radar Power Supply=24V DCOut Put=4-20mAMake=E&H/ABB/VEGA |
| 619 | 4U wall-mount Rack/Cabinet shelf or self-standing & is great for organizing your DVR-NVR-Server-Network devices. 4U rack has a key lock feature for keeping your device safe in this cabinet. This rack is made with the highest care while making it. Since making its quality, best, 6-way processed powder coating is done for long-lasting, Corrosion and Rustproof. Top and bottom cable entry provides optimal flexibility for cable management. It also has 4 Power sockets surge protector and 1 AC AXIAL cooling Fan attached in it. Rack size: 45 X 55 X 25.5 CM. Weight: 9.20 kg. Colour: Gray. Package Contains 1 Rack, Screws, Nylon Sleeves, 2 Keys. |
| 620 | Gigabit SFP to RJ45 Fiber multi Media Converter | Fiber to Ethernet Converter | 10/100/1000Mbps RJ45 Port to 1000Base-LX Dual-Mode Fiber(Make - Dlink or equivalent) |
| 621 | 24 port fiber optic panel or light interface unit drawout Type |
| 622 | OFC Splicing with pigtails |
| 623 | Configuration of Electro Mechanical Instrument to PLC and Server level with data acquistion at interval of every 5 second including monitoring and command control from remote place Total No of Instruments |
| 624 | Optical fiber 16-port managed L3 gigabit fiber switch and media coverter for non-blocking throughput switching, high performance and low latency, Gigabit Ethernet SFP and RJ45 ports (Make- Digisol- SG-GS4600FSE or equivalent |
| 625 | Fiber SFP Multi mode transicever 100 base LC type module |
| 626 | SM(OS2) Duplex Patch cord 3mtr LC-SC,PC type |
| 627 | Fiber Pigtail/patchcord 1 mtr |
| 628 | AUTOMATION DMA-2 |
| 629 | PART-I:- Installation of Bulk Water Meter system |
| 630 | Supply Fitting, fixing & commissioning of following dia bulk eletromagnetic water meterwith the development of the application for monitoring and reporting(in .xlsx format & GUI) the LIVE data of total flow and pressure in each area of the water distribution channel and integrate the application with an existing PHEO application. (Application: The PHEO is having one existing application in the platform of LINUX, PHP, MySQL, JAVA script, HTML, CSH, AJAX, J-Query). All complete as per direction of Engineer in charge. |
| 631 | 150mm dia Full bore type Electro Magnetic Water Flow meter |
| 632 | Supplying, Fitting,Commissioning,Fixing double / single chamber DI PN 16 control valve,hydraulically operated, single diaphragm actuated, globe pattern The valve shall consist of three major components; the body with the seat installed; the cover with the bearing installed and the diaphragm assembly. The diaphragm assembly shall be the only moving part and shall form a sealed chamber in the upper portion of the valve, separating the operating pressure from line pressure. Packing glands, stuffing boxesand there shall be no piston operating the main valve or pilot controls. No fabrication or welding shall be used in the manufacturing process.The control will be achieved by operating of 2 number Solenoid Valves mounted on the main Valve,electronic timer controller,Timer,integral oriface plate assembly,differential control,reverse flow control,restriction orifice.The Connecting tubing on the Main Valve will be SS with SS fitting from reputedmake. The valve shall be working up to 3.0 kg/cm2 operating pressure Body A216 WCBintegrated with PLC pannel for operation (local/remort and web enabled with command and control) make CLA/SINGER/ VAG to control water supplyincluding the cost of valve cutting the pipeline & making good to the damagesincludingcost ofall labours, T&P etc. all completeas per the direction of Engineer-in-charge. |
| 633 | 150mm DiaPN16 Flow Control Valve with 2 nos solenoid |
| 634 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 635 | Supplying all labour, material, tools & plants for dismantling of bituminous courses of flexible pavements and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, all complete as per specification and direction of Engineer-in-charge. |
| 636 | Supplying all materials, labour, tools & plants for cutting ofmettaledroad for laying of pipeline including conveyance of all material at work, etc. all complete as per specification and direction of the |
| 637 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 638 | Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipeas per specifications including testing with cost of all jointing materials, transportation to site etc. all completeas per the specifications and directions of Engineer-in-charge. |
| 639 | 150mm dia MJ Socket |
| 640 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specificationof following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 641 | 219.10mm ODM.S.Pipe 6.3mm thick |
| 642 | Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete |
| 643 | Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes upto 8mm thickand fittings at site by using welding generator including testing of joints, as per specification complete |
| 644 | Supplying all materials, labour and T&P for making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of E.I.C. |
| 645 | Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete |
| 646 | Supplying all materials, labour T&P for construction of RCCValve chamber of following internal sizes having earth work in excavation in all kinds of soil, 150mm sand filling ,150mm PCC (1:3:6), 200mm thick base, wall & cover slab with RCC 1:1½:3, fixing factory made precast SD20 Frame & cover slab, foot step iron etc all complete. |
| 647 | Internal Size=0.90m.x0.90mx 1.20mtrwith SFRCcover 1.20mx1.20m (Outer) |
| 648 | Supply of Pressure transducer to be installed at 250 mm dia delivery main with following technical specification:-i.e.Range up to 10 kg/cm2,Type-Sensor,Power Supply-24 DC,Out put-4 to 20mA,Make-E & H/ABB/VEGA.with SS 316 grade sensor niddle valve with bypass tube |
| 649 | PART-II:- Laying & Installation of OFC system |
| 650 | Cutting of cement concrete road for repair/laying of water supply line pipe removal of debries by Tractor-trolley including,transportation,all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 651 | Cutting of Asphalt road for repair/laying of water supplypipe line removal of debries by Tractor-trolley including,transportation,all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 652 | Mending with Plain cement concrete (1:2:4) with 12mm size crusher broken hard Granite chips including cost of all labour and materials with all taxes,lead,T & P etc all complete. |
| 653 | HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.(excluding earth work) |
| 654 | Supply and Installation of pre-fabricated GRP Joint Box with lid size 600 x 600 x 600 mm for OFC loop and termination including labour as per telecom specification and directions of Site Engineer / Engineer-in-Charge. |
| 655 | OFC: Supply and Laying of 12 core unarmoured Optical fibre cable ( OFC. Fiber glass with F-G 62.5/125micron, 2.6DB/KMF600) to various sites through HDPE pipe /in Air ( pole to pole ), prelaying testing of each cable drum for each fibre and tahing the OTDR traces,submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/Site Engineer. |
| 656 | Supply and Installation of OFC jointing kits as per drawings,specificationsanddirections of Engineer-in-charge/Site Engineer. |
| 657 | Laying HDPE Pipe by HDD method using HDD machine upto 90mm dia including hire charge of HDD machine, operator, POL lubricant etc |
| 658 | PART-III:- Installation of Chlorination System |
| 659 | Provision for supplytesting & commissioning of chemical Booster pump 7m3/hr, H-40 M,0 to 100m³/Hr in proportion to 4 to 20 mA signal. 100 SPM @ 75 HZ and 67 SPM @ 50 HZ. Motor Frequency Range = 15 to 75 Hz Auto/Manual, Remote, while running or at rest, 5:1 Turn Down Ratio, Over & above there will be provision for manual stroke variation.The Disch piping & fittings starting from the pump flange upto the tank nozzle including VFD 3 Phase input and 415 V 3 Phase output . Inverter will receive a signal of 4 to 20 mA and will vary the RPM of the motor in proportion to the same, thus controlling the pump capacity. Pump will also have the provision for manual stroke adjustment. Connection between the Inverter & pump together with the Instrument for generating 4 to 20 mA signal witheletrical installation etc all complete. |
| 660 | 1set=2 nos dosing pump (1 no working + 1 no standby) |
| 661 | Installation charges including all piping arrangement & hire charges of Hydra etc all complete |
| 662 | Supplying of control panel with VFD for running of the above chlorine dosing pump and motor etc all complete as per direction of Engineer-in-Charge. |
| 663 | Supply, of On line Chlorine Analyser with following technical specification:- i.e.Single Channel free Chlorine Analyser,Transmitter-Aqua4trans DualChannel,FRC sensor FMNSX5 with 10 feet cable(with manual PH compensetion),Complete system pre mounted on plate with FTCs foe sensors,Power supply110-240VAC,Trans 2" pipe/wall /Panel mount type,RangeFRC-0-5 ppm,Complete plate mounted system,(The Analyzer must be pre wired on plate,we will provide only power supply & pipe connection system) |
| 664 | Charges for installation, Testing & commissioning ofOn line Chlorine Analyser . |
| 665 | Design, engineering, procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and painting at manufacturer’s works, packing, supply, unloading /transportation/ handling/storage at site, assembly at site, installation including touch-up painting, hook-up, pre-commissioning, commissioning, inspection and testing of the complete of the following capacity(Prime Power) DG sets along with AMF Panels, Acoustic enclosure, supply of all erection & commissioning spares, special tools and tackles (as required),instrumentation, allAuxiliaries, Exhaust system& silencer, Fuel Tank, Fuel piping , cable of required size, 2 nos earthingfor DG set, required foundation, good quality(L& T or equivalent) , change over,meetering panel, with CT Meter, all complete etc. with inspection certificate from electrical inspector and as as per site condition & direction of Engineer in charge. |
| 666 | 15KVA three phase DG set Disel operated having automatic feeder panel with display contoller which can communicate oil level , engine temperature, voltage, current,, battery voltage,frequency hour meter, engine oil temp & should be liquid cooled engine. The controller should be fixed on a separate wall with connecting cable upto 15 mtr |
| 667 | External Lightning Protection System |
| 668 | PART-IV:- Installation of Automation System |
| 669 | Supply,Installation & Commissioning of SCADA software 40 I/O (Make-Schiender/Simens/Fox) with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language including supply,installations of Desk top PC, Modem for receiving data, UPS etc all complete Including licence Key. |
| 670 | Supply, Installation, Testing,Programming, Wiring & CommissioningofPLC panel Made out of 2 MM C.R sheet,PLC Pannel with encloser size 800x600x2100mm Duely Powder coated, Wall mounted/floor standing, Front operated, complete with interconnection with copper wire and lugs.(Make-Rittal,BCH,Hoffman)Having Type 2-1P+N 15kA Surge protection device- 1Nos ,32A 15KA MCB - 1 nos, DC powered Transistor/Relay based24DI and 16DO EthernetPLC Module, 35 Micosecond Response time for DI/DO Switch on/off, 8ch Analog input module- 2 Nos having 1ms per channel conversion/sampling time. 4ChAnalog Output module - 2 Nos having 1ms per channel conversation/ stabilisation time. Ambient air tempature upto 55 "C.10"" W touch Panel display having 2 ethernet, Usb host&device 24VDC type- 1 Nos (Make- Siemense ,Schneider-,Allen Bradly).Rated DP Separate DC MCB for Indivisual Modules.. 24dc 1C/O type slim Relay with Led for Digital out put - 16 Nos (make-wago,phoenix contact). 5 Ch Unmanaged Industrial Grade Switch- 1 Nos. (Make- wago,schneider,siemense,Allen Bradley) .4G ethernet TCP/IP-Modbus Industrial Grade GSM Router -1 Nos (make- Robustel,Teltonika). 1.5 mmFuse TB with 0.5A glass fuse with Fuse blown indicator type Terminal Block for Digital Input/analog output- 60. 1.5 mm Terminal block for Digital Output - 40Nos. (Make- wago,Phoenix Contact). 24VDC powered signal isolator for Analog Input - 16 Nos. (Wago,Phoenix), 24 Vdc 6Amp redundent Power supply Unit with input and output DC MCB - 2Nos ( Make- Wago,Phoenix Contact,Siemens,Schneider), Color Coded Terminal Blocks for AC/DC/earth Bus/TB- 50 Nos.(Make- Wago,Phoenix Contact,Connectwell),2/4/6 Amp AC/DC MCB- 6nos All switchgear and controlgear make- Siemens,schneider,ABB,L&T.All completed asper electrical specification and as per direction of EIC. |
| 671 | Type 2-1 P+N 15KVA Surge protection device |
| 672 | Supply, Installation, Programming, Testing& Commissioningof1KVA Online UPS with 08Hr Battery Backup System, Having Double conversion IGBT based online UPS system with builtin Isolation Transformer, Input 150-250VAc 1Phase,50Hz, output: 230 VAC,1Phase,50Hz. Drytype 3 nos Battery 42AH with MS Rack . All completed asper electrical specification and as per direction of EIC. |
| 673 | Supplying all materials,labour,T&P, for fitting of PLC panel as per electrical specification |
| 674 | 1.5 sqmm 8 core armoured copper cable |
| 675 | 1.5 sqmm 3 core armoured copper cable |
| 676 | 0.75sqmm 2 core armouredInstrument(Screen cable) |
| 677 | CAT-6 Dlink cable |
| 678 | Cable Gland-25 mm |
| 679 | Cu.logs-1.5/2.5 |
| 680 | Supply, installation of chemical earthing withcrystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all completeas per the site requirement. |
| 681 | Supply of Level indicator to be installed at ESR with following specification Range=0 to 8mtrType =Radar Power Supply=24V DCOut Put=4-20mAMake=E&H/ABB/VEGA |
| 682 | 4U wall-mount Rack/Cabinet shelf or self-standing & is great for organizing your DVR-NVR-Server-Network devices. 4U rack has a key lock feature for keeping your device safe in this cabinet. This rack is made with the highest care while making it. Since making its quality, best, 6-way processed powder coating is done for long-lasting, Corrosion and Rustproof. Top and bottom cable entry provides optimal flexibility for cable management. It also has 4 Power sockets surge protector and 1 AC AXIAL cooling Fan attached in it. Rack size: 45 X 55 X 25.5 CM. Weight: 9.20 kg. Colour: Gray. Package Contains 1 Rack, Screws, Nylon Sleeves, 2 Keys. |
| 683 | Gigabit SFP to RJ45 Fiber multi Media Converter | Fiber to Ethernet Converter | 10/100/1000Mbps RJ45 Port to 1000Base-LX Dual-Mode Fiber(Make - Dlink or equivalent) |
| 684 | 24 port fiber optic panel or light interface unit drawout Type |
| 685 | OFC Splicing with pigtails |
| 686 | Configuration of Electro Mechanical Instrument to PLC and Server level with data acquistion at interval of every 5 second including monitoring and command control from remote place Total No of Instruments |
| 687 | Optical fiber 16-port managed L3 gigabit fiber switch and media coverter for non-blocking throughput switching, high performance and low latency, Gigabit Ethernet SFP and RJ45 ports (Make- Digisol- SG-GS4600FSE or equivalent |
| 688 | Fiber SFP Multi mode transicever 100 base LC type module |
| 689 | SM(OS2) Duplex Patch cord 3mtr LC-SC,PC type |
| 690 | Fiber Pigtail/patchcord 1 mtr |
| 691 | AUTOMATION DMA-3 |
| 692 | PART-I:- Installation of Bulk Water Meter system |
| 693 | Supply Fitting, fixing & commissioning of following dia bulk eletromagnetic water meterwith the development of the application for monitoring and reporting(in .xlsx format & GUI) the LIVE data of total flow and pressure in each area of the water distribution channel and integrate the application with an existing PHEO application. (Application: The PHEO is having one existing application in the platform of LINUX, PHP, MySQL, JAVA script, HTML, CSH, AJAX, J-Query). All complete as per direction of Engineer in charge. |
| 694 | OZ-1,OZ-2 & OZ-3 Distribution |
| 695 | 100mm dia Full bore type Electro Magnetic Water Flow meter |
| 696 | 150mm dia Full bore type Electro Magnetic Water Flow meter |
| 697 | 200mm dia Full bore type Electro Magnetic Water Flow meter |
| 698 | Supplying, Fitting,Commissioning,Fixing double / single chamber DI PN 16 control valve,hydraulically operated, single diaphragm actuated, globe pattern The valve shall consist of three major components; the body with the seat installed; the cover with the bearing installed and the diaphragm assembly. The diaphragm assembly shall be the only moving part and shall form a sealed chamber in the upper portion of the valve, separating the operating pressure from line pressure. Packing glands, stuffing boxesand there shall be no piston operating the main valve or pilot controls. No fabrication or welding shall be used in the manufacturing process.The control will be achieved by operating of 2 number Solenoid Valves mounted on the main Valve,electronic timer controller,Timer,integral oriface plate assembly,differential control,reverse flow control,restriction orifice.The Connecting tubing on the Main Valve will be SS with SS fitting from reputedmake. The valve shall be working up to 3.0 kg/cm2 operating pressure Body A216 WCBintegrated with PLC pannel for operation (local/remort and web enabled with command and control) make CLA/SINGER/ VAG to control water supplyincluding the cost of valve cutting the pipeline & making good to the damagesincludingcost ofall labours, T&P etc. all completeas per the direction of Engineer-in-charge. |
| 699 | OZ-1, OZ-2 & OZ-3 Distribution |
| 700 | 100mm DiaPN16 Flow Control Valve with 2 nos solenoid |
| 701 | 150mm DiaPN16 Flow Control Valve with 2 nos solenoid |
| 702 | 200mm DiaPN16 Flow Control Valve with 2 nos solenoid |
| 703 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 704 | Supplying all labour, material, tools & plants for dismantling of bituminous courses of flexible pavements and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, all complete as per specification and direction of Engineer-in-charge. |
| 705 | Supplying all materials, labour, tools & plants for cutting ofmettaledroad for laying of pipeline including conveyance of all material at work, etc. all complete as per specification and direction of the |
| 706 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 707 | Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipeas per specifications including testing with cost of all jointing materials, transportation to site etc. all completeas per the specifications and directions of Engineer-in-charge. |
| 708 | 100mm dia MJ Socket |
| 709 | 150mm dia MJ Socket |
| 710 | 200mm dia MJ Socket |
| 711 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specificationof following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 712 | 219.10mm ODM.S.Pipe 6.3mm thick |
| 713 | 373.0mm ODM.S.Pipe 6.4mm thick |
| 714 | Supplying M.S.flange of following thick suitable for following dia of M.S./C.I pipes specials,valves with wastage including cost of materials, labour, T & P etc all complete. |
| 715 | 200mm dia M.S. Flange.(12mm thick) |
| 716 | Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete |
| 717 | Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes upto 8mm thickand fittings at site by using welding generator including testing of joints, as per specification complete |
| 718 | Supplying all materials, labour and T&P for making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of E.I.C. |
| 719 | For Installation of Flow meter 100 mm |
| 720 | For Installation of Flow meter 150 mm |
| 721 | For Installation of Flow meter 200 mm |
| 722 | Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete |
| 723 | Supplying all materials, labour T&P for construction of RCCValve chamber of following internal sizes having earth work in excavation in all kinds of soil, 150mm sand filling ,150mm PCC (1:3:6), 200mm thick base, wall & cover slab with RCC 1:1½:3, fixing factory made precast SD20 Frame & cover slab, foot step iron etc all complete. |
| 724 | Internal Size=0.90m.x0.90mx 1.20mtrwith SFRCcover 1.20mx1.20m (Outer) |
| 725 | Supply of Pressure transducer to be installed at 250 mm dia delivery main with following technical specification:- i.e.Range up to 10 kg/cm2,Type-Sensor,Power Supply-24 DC,Out put-4 to 20mA,Make-E & H/ABB/VEGA.with SS 316 grade sensor niddle valve with bypass tube |
| 726 | PART-II:- Laying & Installation of OFC system |
| 727 | Cutting of cement concrete road for repair/laying of water supply line pipe removal of debries by Tractor-trolley including,transportation,all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 728 | Cutting of Asphalt road for repair/laying of water supplypipe line removal of debries by Tractor-trolley including,transportation,all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 729 | Mending with Plain cement concrete (1:2:4) with 12mm size crusher broken hard Granite chips including cost of all labour and materials with all taxes,lead,T & P etc all complete. |
| 730 | HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.(excluding earth work) |
| 731 | Supply and Installation of pre-fabricated GRP Joint Box with lid size 600 x 600 x 600 mm for OFC loop and termination including labour as per telecom specification and directions of Site Engineer / Engineer-in-Charge. |
| 732 | OFC: Supply and Laying of 12 core unarmoured Optical fibre cable ( OFC. Fiber glass with F-G 62.5/125micron, 2.6DB/KMF600) to various sites through HDPE pipe /in Air ( pole to pole ), prelaying testing of each cable drum for each fibre and tahing the OTDR traces,submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/Site Engineer. |
| 733 | Supply and Installation of OFC jointing kits as per drawings,specificationsanddirections of Engineer-in-charge/Site Engineer. |
| 734 | Laying HDPE Pipe by HDD method using HDD machine upto 90mm dia including hire charge of HDD machine, operator, POL lubricant etc |
| 735 | PART-III:- Installation of Chlorination System |
| 736 | Provision for supplytesting & commissioning of chemical Booster pump 7m3/hr, H-40 M,0 to 100m³/Hr in proportion to 4 to 20 mA signal. 100 SPM @ 75 HZ and 67 SPM @ 50 HZ. Motor Frequency Range = 15 to 75 Hz Auto/Manual, Remote, while running or at rest, 5:1 Turn Down Ratio, Over & above there will be provision for manual stroke variation.The Disch piping & fittings starting from the pump flange upto the tank nozzle including VFD 3 Phase input and 415 V 3 Phase output . Inverter will receive a signal of 4 to 20 mA and will vary the RPM of the motor in proportion to the same, thus controlling the pump capacity. Pump will also have the provision for manual stroke adjustment. Connection between the Inverter & pump together with the Instrument for generating 4 to 20 mA signal witheletrical installation etc all complete. |
| 737 | 1set=2 nos dosing pump (1 no working + 1 no standby) |
| 738 | Installation charges including all piping arrangement & hire charges of Hydra etc all complete |
| 739 | Supplying of control panel with VFD for running of the above chlorine dosing pump and motor etc all complete as per direction of Engineer-in-Charge. |
| 740 | Supply, of On line Chlorine Analyser with following technical specification:-i.e.Single Channel free Chlorine Analyser,Transmitter-Aqua4trans DualChannel,FRC sensor FMNSX5 with 10 feet cable(with manual PH compensetion),Complete system pre mounted on plate with FTCs foe sensors,Power supply110-240VAC,Trans 2" pipe/wall /Panel mount type,RangeFRC-0-5 ppm,Complete plate mounted system,(The Analyzer must be pre wired on plate,we will provide only power supply & pipe connection system) |
| 741 | Charges for installation, Testing & commissioning ofOn line Chlorine Analyser . |
| 742 | Design, engineering, procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and painting at manufacturer’s works, packing, supply, unloading /transportation/ handling/storage at site, assembly at site, installation including touch-up painting, hook-up, pre-commissioning, commissioning, inspection and testing of the complete of the following capacity(Prime Power) DG sets along with AMF Panels, Acoustic enclosure, supply of all erection & commissioning spares, special tools and tackles (as required),instrumentation, allAuxiliaries, Exhaust system& silencer, Fuel Tank, Fuel piping , cable of required size, 2 nos earthingfor DG set, required foundation, good quality(L& T or equivalent) , change over,meetering panel, with CT Meter, all complete etc. with inspection certificate from electrical inspector and as as per site condition & direction of Engineer in charge. |
| 743 | 15KVA three phase DG set Disel operated having automatic feeder panel with display contoller which can communicate oil level , engine temperature, voltage, current,, battery voltage,frequency hour meter, engine oil temp & should be liquid cooled engine. The controller should be fixed on a separate wall with connecting cable upto 15 mtr |
| 744 | External Lightning Protection System |
| 745 | PART-IV:- Installation of Automation System |
| 746 | Supply,Installation & Commissioning of SCADA software 40 I/O (Make-Schiender/Simens/Fox) with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language including supply,installations of Desk top PC, Modem for receiving data, UPS etc all complete Including licence Key. |
| 747 | Supply, Installation, Testing,Programming, Wiring & CommissioningofPLC panel Made out of 2 MM C.R sheet,PLC Pannel with encloser size 800x600x2100mm Duely Powder coated, Wall mounted/floor standing, Front operated, complete with interconnection with copper wire and lugs.(Make-Rittal,BCH,Hoffman)Having Type 2-1P+N 15kA Surge protection device- 1Nos ,32A 15KA MCB - 1 nos, DC powered Transistor/Relay based24DI and 16DO EthernetPLC Module, 35 Micosecond Response time for DI/DO Switch on/off, 8ch Analog input module- 2 Nos having 1ms per channel conversion/sampling time. 4ChAnalog Output module - 2 Nos having 1ms per channel conversation/ stabilisation time. Ambient air tempature upto 55 "C.10"" W touch Panel display having 2 ethernet, Usb host&device 24VDC type- 1 Nos (Make- Siemense ,Schneider-,Allen Bradly).Rated DP Separate DC MCB for Indivisual Modules.. 24dc 1C/O type slim Relay with Led for Digital out put - 16 Nos (make-wago,phoenix contact). 5 Ch Unmanaged Industrial Grade Switch- 1 Nos. (Make- wago,schneider,siemense,Allen Bradley) .4G ethernet TCP/IP-Modbus Industrial Grade GSM Router -1 Nos (make- Robustel,Teltonika). 1.5 mmFuse TB with 0.5A glass fuse with Fuse blown indicator type Terminal Block for Digital Input/analog output- 60. 1.5 mm Terminal block for Digital Output - 40Nos. (Make- wago,Phoenix Contact). 24VDC powered signal isolator for Analog Input - 16 Nos. (Wago,Phoenix), 24 Vdc 6Amp redundent Power supply Unit with input and output DC MCB - 2Nos ( Make- Wago,Phoenix Contact,Siemens,Schneider), Color Coded Terminal Blocks for AC/DC/earth Bus/TB- 50 Nos.(Make- Wago,Phoenix Contact,Connectwell),2/4/6 Amp AC/DC MCB- 6nos All switchgear and controlgear make- Siemens,schneider,ABB,L&T.All completed asper electrical specification and as per direction of EIC. |
| 748 | Type 2-1 P+N 15KVA Surge protection device |
| 749 | Supply, Installation, Programming, Testing& Commissioningof1KVA Online UPS with 08Hr Battery Backup System, Having Double conversion IGBT based online UPS system with builtin Isolation Transformer, Input 150-250VAc 1Phase,50Hz, output: 230 VAC,1Phase,50Hz. Drytype 3 nos Battery 42AH with MS Rack . All completed asper electrical specification and as per direction of EIC. |
| 750 | Supplying all materials,labour,T&P, for fitting of PLC panel as per electrical specification |
| 751 | 1.5 sqmm 8 core armoured copper cable |
| 752 | 1.5 sqmm 3 core armoured copper cable |
| 753 | 0.75sqmm 2 core armouredInstrument(Screen cable) |
| 754 | CAT-6 Dlink cable |
| 755 | Cable Gland-25 mm |
| 756 | Cu.logs-1.5/2.5 |
| 757 | Supply, installation of chemical earthing withcrystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all completeas per the site requirement. |
| 758 | Supply of Level indicator to be installed at ESR with following specification Range=0 to 8mtrType =Radar Power Supply=24V DCOut Put=4-20mAMake=E&H/ABB/VEGA |
| 759 | 4U wall-mount Rack/Cabinet shelf or self-standing & is great for organizing your DVR-NVR-Server-Network devices. 4U rack has a key lock feature for keeping your device safe in this cabinet. This rack is made with the highest care while making it. Since making its quality, best, 6-way processed powder coating is done for long-lasting, Corrosion and Rustproof. Top and bottom cable entry provides optimal flexibility for cable management. It also has 4 Power sockets surge protector and 1 AC AXIAL cooling Fan attached in it. Rack size: 45 X 55 X 25.5 CM. Weight: 9.20 kg. Colour: Gray. Package Contains 1 Rack, Screws, Nylon Sleeves, 2 Keys. |
| 760 | Gigabit SFP to RJ45 Fiber multi Media Converter | Fiber to Ethernet Converter | 10/100/1000Mbps RJ45 Port to 1000Base-LX Dual-Mode Fiber(Make - Dlink or equivalent) |
| 761 | 24 port fiber optic panel or light interface unit drawout Type |
| 762 | OFC Splicing with pigtails |
| 763 | Configuration of Electro Mechanical Instrument to PLC and Server level with data acquistion at interval of every 5 second including monitoring and command control from remote place Total No of Instruments |
| 764 | Optical fiber 16-port managed L3 gigabit fiber switch and media coverter for non-blocking throughput switching, high performance and low latency, Gigabit Ethernet SFP and RJ45 ports (Make- Digisol- SG-GS4600FSE or equivalent |
| 765 | Fiber SFP Multi mode transicever 100 base LC type module |
| 766 | SM(OS2) Duplex Patch cord 3mtr LC-SC,PC type |
| 767 | Fiber Pigtail/patchcord 1 mtr |
| 768 | Pumping Unit (VT Pump / Centrifugal Pump, Piping , Valve etc.) (Rising Main, DMA-1, DMA-2 & DMA-3) |
| 769 | SITC of approved make V.T pump set of given capacityand head with VFDcompatible, TEFC squirrelcage solid shaft inductionmotor working on 3- Phase50 Hz ± 5%, 415 V ± 10%,complete set as per relevantIS andfollowingmaterialof Construction:ImpellerwithwearingringCF8M, Shaft with sleeve S.S., Casing- C.I., Columnpipe - M.S, Base frame M.S With 1 No. Stand by. Approx-130 HP-2 nos(1W+1S) of suitable Duty as per direction of Engineer-in-Charge. |
| 770 | Providing, erecting and giving test of Centrifugalpump set conforming to IS9079operatingat2900RPMwithCIimpeller,primingfunnel,cock, suitableflangesatsuctionanddeliveryside.Pumpshallhavecommon shaft for pump and motor. Motor shall be suitablefor working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitableforworkingatvariousdischargeandheadrequirements.Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block. PumpshallbeerectedonProvidedC.C.foundationblockwithsuitable foundation bolts grouted in C.C. foundation block. Approx-80 HP-2 nos(1W+1S) of suitable Duty as per direction of Engineer-in-Charge. |
| 771 | Supplying all materials, labour T&P for Construction of RCC pump foundation base including fixing of base plate for installation of centrifugal pump as per approved specification and direction of Engineer in charge. |
| 772 | Earth work in excavation of all kind of soil |
| 773 | C.C (1:3:6) with 4cmC.B H.G metal |
| 774 | Sand filling |
| 775 | R.C.C (1:1.5:3) with 12mm size C.B.H.G chips |
| 776 | M.S. reinforcement for R.C.C. work |
| 777 | Steel plate centering & shuttering for R.C.C work |
| 778 | Supplying & fixing M.S Channel section 75mm /100mm size including fabrication. |
| 779 | Fixing of 25mm dia 600mm foundation steel nut & bolt with cost of fabrication. |
| 780 | Supplying all labour and T&P for providing and laying MS pipe and specials confirmingtoIS3589/99ofqualitygradeFE410/GIPipe(Medium) confirming to specificationof following nominal dia and including transportationofpipesandfittingtositeetcallcompleteasperthe direction of E.I.C. |
| 781 | 250mm dia M.S.Pipe (6.30mm thick) |
| 782 | 250mm dia M.S. Flange.(12mm thick) |
| 783 | 250mm dia x 45" M.S. Bend |
| 784 | 300mm dia M.S.Pipe (7.10mm thick) |
| 785 | 300mm dia M.S. Flange.(12mm thick) |
| 786 | 300mm dia x 45" M.S. Bend |
| 787 | 350mm dia M.S.Pipe (8.00mm thick) |
| 788 | 350mm dia M.S. Flange.(16mm thick) |
| 789 | 350mm dia x 45" M.S. Bend |
| 790 | SupplyingalllabourandT&PforcuttingoffollowingdiaMSpipeof following thick in treanches by gas cutter set of pocket etc all complete |
| 791 | SupplyingalllabourandT&PforjointingfollowingdiaMSpipeupto 8.0mm thick in treanches by electric arc welding & genetator set of pocket etc all complete |
| 792 | SupplyingallmaterialsLabour &T&P forFixingDuctile IronSluice Valve/NRValvewithdoubleflangedendsforwaterworkspurposes conforming to IS specification for the followingnominal diameters as per specificationcomplete including cost of Sluice valve . competable to 24x7 automation |
| 793 | 250mm dia D/F NR Valve (PN1.6) Vag make/Kirloskar/Audoco |
| 794 | 300mm dia D/F Non Return Valve (PN1.6) Vag make/Kirloskar/Audoco |
| 795 | SupplyingalllabourT&Pmaterialsforfitting&fixingofpressuremeter Non compact dipharma type with snubber, piping & needle valve at ESR aswellasdifferentlane&sub-lane toknowthe waterpressure including the cost of pressre meter with drilling holes in pipe line & making good to the damages at including cost all labours T&P etc all complete as per the direction of Engieer-in-charge. 0 to 6kg/sqm pressure meter. |
| 796 | Supplying all materials, labour.t & p and wiring in existing surface/ conduit with insulated single core 35mm2 multistand copper conductor as required. |
| 797 | Supplying all materials, labour and T&P and fixing to walls or ceiling and floor galvanised mild steel tubes conforming to( IS.1239 Part-1),the following nominal diameter and fittings and clamps including making good to the damages including testing as per specification all complete. [[data for 10 mtr.] |
| 798 | 65mm. dia G.I. pipe |
| 799 | Manufacturing, supply, and delivery of DI D/F non-rising spindle soft seated glandless Gate Valves( PN 1.6) with body and bonnet of Ductile cast iron of grade GGG – 40, wedge with fully encapsulated EPDM rubber W-270 (approved for drinking water) and seals of NBR. The valves shall be of single piece thread rolled. Valve shall have 3 “O” rings of NBR for stem sealing. Gate valve shall be compatible for buried applications without valve chamber. Face-to-face dimensions as per BS 5163-89/IS 14846-PD/EN 558F4 and flange connections as per IS 1538, Maximum Valve operating torque should be at least 40% less than the torque as stated in the standard EN 1074. Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P a it is a resi-coat power approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated up to 200 deg C). |
| 800 | 200 MM dia |
| 801 | Manufacturing, supply, and delivery DI D/F Resilient seated vacuum Tight Butterfly Valve suitable for bidirectional flow with Body and disc made of DI GGG40. Disk shall conform to double eccentric with Specially designed (Dove tail shape) pressure supported sealing system made of EPDM approved by DVGW Clause W270. The Body seat shall be fusion bonded nickel chromium weld overlay and micro finished. Closed Disk Eye with dry Shaft design made of stainless steel with 13% chromium of grade 1.4021 Connected with Medium free bearing of Bronze with double O-ring sealing of EPDM. The shaft shall be Connected to the disk by riveted pin or taper pin with lock. The valve shall be compatible for Buried application without chamber. The Coating and the rubber parts shall comply with DVGW and KTW standards. The gearbox shall be with self-locking, fully enclosed, maintenance-free lubricated for life, worm gear including mechanical position indicator. The valve shall be according to EN593/IS 5163, the face-to-face length shall be EN 588-1, basic series 14/BS 5155(Long Body)/ IS13095 (Long Body) and drilling according to EN 1092-2/IS 6418. Epoxy Powder or liquid Epoxy coating with minimum thickness of 250 micron applied inside water Application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated up to 200 deg C). |
| 802 | 250 MM dia |
| 803 | Manufacturing, supply, and delivery DI D/F Slanted seat Tilting Disc Swing Check Valve in single piece body and closed eye dise construction. Hemispherical dise with 59-degree inclination for open and closing. Corrosion proof and wear resistant (triple offset) dise face & body seat face, both made of fusion bonded Nickel Chromium weld overlay and micro finished. Body and dise of ductile cast iron GGG-40, medium free (dry) shafts of stainless steel and bearings of Zinc-free Bronze. Valve should have provision for internal damping unit for reducing the effect of water hammer / surge, if surge, if required at later stage. Electostatic epoxy power/liquid coating (EP-P) inside and outside blue RAL 5005 with minimum coating thinkness of 150 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P ait is a resi-coat powder approved for drinking water application, applied through fusing bonding technology process by dipping the shot-blasted casted components heated up to 200 deg C). Face to face dimensions as per EN 558-1 Series 14 and flange connection as per EN 1092-2 / IS1538. Specification and dimensions as per EN 12334. |
| 804 | 250 MM dia |
| 805 | L.T. Line (Detailed Estimate/Scope/Specification to be obtainedfrom TPSODL before commencement of work.Work should be done as per TPSODL Estimate/ Scope/ Specification/ Supervision/ Direction). |
| 806 | 33 kv Line with 160x160 mm GI Pole |
| 807 | External power supply withinstallation of 3 phase transformer (Sub-Station) 11/.4 KVA with 250KVA Transformer(1W + 1S) (Detailed Estimate/Scope/Specification to be obtainedfrom TPSODL before commencement of work.Work should be done as per TPSODL Estimate/ Scope/ Specification/ Supervision/ Direction). |
| 808 | Including installation with all required material 250 KVA Transformer (1W+1S) Sub-Station |
| 809 | Substation Building of size (5.00 m x 3.00 m) for 250 KVA and above transformers |
| 810 | Supply, Installation, Testing Wiring & Commissioning of for 250KVA Silent DG set with AMF panel including PLC Compactible, AMF Cum Manual changeover pane required cable from DG to AMF & AMF to main control panel Made out of 2MM C.R sheet, Duely owder coated, Floor mounted, Front operated, complete with Rated aluminium Bus Bar and interconnection with copper wire and lugs. Having 200A changeover-1 nos, AC1 Rating 200A 4 Pole Power Contactor - 2 Nos, Start /Stop Push Bottom Switch -1 set, RYB indicator- 6 Nos, ON/OFF Indicator-5, 2.5MM control Terminal- 10 Nos, All switchgare and controlgare make Siemens, schneider, ABB, L&T, LEGRAND including arthing arrangements, RCC Base foundation and canopy arrangements all complete as per electrical specification and as per direction of EIC. |
| 811 | 250 KVA |
| 812 | Operation & Maintenance Cost (5 years for DMA-1, DMA-2 & DMA-3) |
| 813 | Operation & Maintenance of PH Installations for Five Years as per Scope of Work and Technical Scope and direction of Engineer-in-Charge. (Excluding Cost towards Chemicals and Energy Charges) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
