Tender For Development Works At Rampura Muktidham And Allied Works At Chambal River Front Kota, Kota-Rajasthan

TDR : 37862259

Tender Notice
BOQ

Expired

Kota , Rajasthan

Tender Brief : Tender For Development Works At Rampura Muktidham And Allied Works At Chambal River Front Kota

Document Fees
₹ 7500 /-

EMD
₹ 610100.0 /-

Tender Value
₹ 3.05 Crore /-

Submission Date
14-06-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-incharge.
2	Demolishing cement concrete manually/ by mechanical means including disposal of MATERIAL within 50 metres lead as per direction of Engineer-in-charge.
3	1: 3: 6 or richer mix.
4	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
5	In cement mortar
6	Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable MATERIAL and disposal of unserviceable MATERIAL within 50 metres lead as per direction of Engineer-in-charge:
7	In cement mortar.
8	Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead.
9	Dismantlingroofingincludingridges,hips,valleysandraftersetc.andstackingthewithin 50 meter lead of:
10	G.I. Sheet.
11	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
12	Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.
13	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material.
14	Beyound 60 cm girth upto including 120 cm girth
15	Providing and fixing double scaffolding system on the exterior side, upto five story made with 4\" wooden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. The scaffolding system shall be stiffened with bracing, runner, connection of building if necessary with allessential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding.Note : This item to be used for maintence work judicially
16	Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil
17	Carriage of materials including loading, unloading, stacking and transportation Earth, Sand, Lime, Morrum manure or sludge Building Rubbish Stone metal (Grit and ballast etc.) for 1 Km.
18	Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand
19	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M10 grade Nominal Mix1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20 mm nominal size).
20	Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6( 1-Cement : 6-Sand).
21	Random Rubble stone masonry with hard stone insuperstructure above plinth level and upto five level above 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement : 6-Sand).
22	Add extra for facing as per design and detailed specificationsincluding additional cost of stones
23	Course rubble facing First sort.
24	Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :
25	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :
26	20mm thick.
27	12mm thick.
28	Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
29	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :
30	Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
31	Columns, pillars, posts and struts etc.
32	Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excludingthe cost of centering, shuttering and reinforcement.M20 grade Nominal Mix / Design Mix
33	Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinthand string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M20 grade Nominal Mix / Design Mix
34	Providing and laying in position specified grade of cementconcrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excludingthe cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix
35	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.(\"Original producers\" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)
36	Thermo-mechanically Treated bars (Conforming of relevent IS code)
37	Random rubble dry stone Kharanja under floor.
38	Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
39	Extra if square,rectangular hollow tubelar sections are used or grill made by flats only
40	Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) withpigment to match the shade of the marble slab including grinding, rubbing and polishing complete.
41	South (Red)
42	Above 3601 Cm2 Slabs
43	Providing and fixing to existing door frames.
44	30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15 mm x15mm , top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC „C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and20mm shall be tapered on both sides to form lock rail. Topbottom and lock rails shall be provided either side of the panel.10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the „C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture?s specification & drawing.(For W.C.and bathroom door shutter).
45	Grading roof for water proofing treatment with water proffing compound
46	Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
47	Providing and Fixing Dholpur White / Mandana stone/Gwalior Grey/ Gwalior mint stone base with white cement & Tinex chamical, & SS Clamp and Fastners (of approved (brand) inclusive of moulding, carving, rubbing, polishing complet, laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attached with hairline joint at transition including rubbing, polishing and finishing, complete in all respect as per direction of Enginner &Item /Architect with all lead & lift. The Stone measurement will be done of outer most dimension.
48	Providing, hoisting and fixing with required fastener up to floor Three level precast reinforced concrete pannel in decorative and heritage work ( Pan patti, Kangoora, Bell, Nag Fani, panels etc. or similar architectural designs) of Nominal M20 grade mix including cost of required centering, shuttering, finishing, smooth surface with1:3 (1 cement: 3 fine sand) on exposed surface complete including cost of required reinforcement : up to 50 mm thick(Rectangular Area shall be measured)
49	Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10 m height with 20 to 30 mm thick Pink Sand stone (Bansi Paharpur) and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid separately)
50	Exposed face Machine cut
51	Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
52	Granite/Kota Stone Work
53	Full Edge moulding
54	Supplying and fixing at site, Bronze Metal Alloy (88% Copper, 8% Tin and 4% Zinc) sculpture including Planning, developing, casting, all loading-unloading, transportation, scaffolding, hoisting, installation with all required T&P, fixing over/on base/surface as per shape -size & placement at all heights as per approved drawing, finishing, surface treatment etc. coveringproperly till the date of opening/inauguration of site etc. Modelling, 3D scanning of model Robotic machining (enlargement of model to desired height), assembling and final detailing, Piece moulding, Wax casting (Lost wax process), Wax chasing, sprung Investing, metal casting, Divesting, metal chasing, Brazing/Welding Finishing and Patina/Colour etc. Complete job in all respect as per approved design & drawing under approval of project consultant, appointed for the project & as per directions of Engineer-In-Charge complete in all respect. (Theme, concept plan, schematic arrangement, other relevant details and drawings of element/statue/sculpture are enclosed. The final drawing shall be provided after award of the work.)
55	Note: Payment shall be made per kg of the finished sculpture (final payment shall be paid after test result of composition-If variation in composition of alloy metal observed the rate shall be paid accordingly). Other masonry, concreting, steel reinforcement plastering etc. required shall be paid extra but additional support if required for bronze metal alloy sculpture, shall be of Stainless steel/ zinc coated iron steel etc. for which nothing shall be paid extra.)
56	Singlepieceofstoneelementwithcarving work in Bansi Paharpur stone includes stone pillar, stone base, todies and thabi etc carving work as per direction of engineer in charge
57	P&F white sand stone Chhatri (Total height -2.1 and 0.85x0.85m size with following specification with carving work (All measurement are in meters) solid pillars, Galta, size Dasa, Arch and barsoth,chhaja,thick with projection dabstone, step clading abiove dabstone, Gola stone, Gumbad, kalash, base complete, all complete with solid stone as per approved drawing and direction d Engineer-in charge
58	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:
59	Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
60	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete
61	New Plastered Surface (three or more coats)
62	Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision
63	New Work
64	P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.
65	Size 600mm x 600mm
66	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
67	Two or more coats on new work
68	Supply and fixing Jodhpur sand stone Machine cut Kerb stone (10cm wide 40 cm. height) fixed in white cement sand mortar 1:4 with pigment including EarthWork.
69	Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape whenever required.
70	0.63 mm thick with zinc coating not less than 275 gm/m2
71	Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.
72	0.63mm thick with zinc coating not less than 275
73	Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc.
74	Good soil of earth
75	Providing & fixingBrown Kota/ Mandana / dholpur/ slate stone incladding / Flooring Structuralbase with white cement & Tinex chamical& SS CLAMP and Fastners (of approved brand) laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attachedcomplete in all respect as per direction of Enginner- In- Charge & Architec with all lead & lift. The Stone measurement will be done of outer most dimension. Thickness of ston 40-50mm.
76	Flooring with Cobble stone of approx. Size 125x125x75 mm (thick)laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge.
77	Providing and Fixing bidasar Sandstone benches complete as per drawing attached complete as per direction of Enginner- In- Charge. Size of banches (1.8 X 0.6 X 0.4) M as per approved design & drawing
78	Providing and Fixing bidasar Sandstone Flower Pots of Top Dia. 0.7 M and Bottom Dia.0.5 M , height 0.75 M complete in all respect as per drawing attached and as per direction of Enginner- In- Charge & Architec with all lead & lift. as per approved design & drawing (Drg-6)
79	P & F Dustbins of MS frame and first grade sal wooden planks as per drawing and direction of engineer in charge
80	P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor.
81	P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall.:
82	Size 580 mm x 450 mm
83	P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.
84	Flat Back (large) or half stall size 610x400x80mm.
85	P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm.
86	Makrana `Albeta` Marble having light streaks.
87	P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:
88	Size 580x440mm.
89	Providing and fixing 3-layer PP-R (Polypropylene randomcoplymer ) pipes SDR 7.4 UV stabilized and antimicrobialfusion welded, having thermal stability for hot & cold watersupply including all PP-R plain & brass threadedPolypropylene random fittings and fixing the pipe with clampsat 1 metre spacing. This includes cost of cutting chases andmaking good the same including testing of joint complete asper direction of Engineer - in charge.(CONCEALED WORKINCLUDING CUTTING CHASES AND MAKING GOODTHE WALL ETC.)
90	PN-16 Pipe, 20 mm OD
91	PN-16 Pipe, 25 mm OD
92	PN-16 Pipe, 32 mm OD
93	P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:
94	C.P. Pillarcockfancytype ,15mm nominal bore.
95	P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:
96	(-do-) Elbow-action, 15mm nominal bore.
97	C.P. Brass bib cock,15mm nominal bore.
98	P & F C.P. brass Urinal Spreader for Large Urinal of heavy duty of approved make as per direction of Enginner-in-Charge
99	P & F C.P. brass Doom Waste Coupling 32 mm dia.
100	P & F Bottle Trap of approved make :
101	C.P Brass 40 mm
102	P & F Toilet Paper Holder with rod of approved quality/make:
103	C.P. brass
104	Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
105	75 mm dia
106	110 mm dia
107	Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
108	Bend 45 Dg.
109	110mm dia
110	Socket Plug
111	110mm dia
112	Pipe Clip
113	110mm dia
114	Single Tee
115	110mm dia
116	Gully Trap
117	110mm dia
118	Nahni Trap with Jali 4”
119	110mm dia
120	Vent Cowel
121	110mm dia
122	P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:
123	1000 (-do-)
124	P & F Liquid Soap Container with brackets complete of approved make:
125	C.P. brass
126	P & F Mixing Range (15mm)
127	(-do-) with swinging spout casted.
128	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)
129	20mm nominal outer dia pipes
130	25 mm nominal outer dia pipes
131	32mm nominal outer dia pipes
132	40 mm nominal outer dia pipes
133	P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete :
134	(-do-) wt.Not less than 800 gm, 32mm.
135	(-do-) wt.Not less than 1200 gm 50mm.
136	Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:
137	Size 300 Cm. dia outside & 300 Cm. depth .
138	Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 gradeC.C floor &RCC slab covering with M15 grade c.c. floor,50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-
139	Size 230 x110 x150 cm.(for 20 users) with 115 mm thickRCC (M-20) slab with Tor steel reinforcement 10mm ? @15cm c/c bothways including shuttering complete in all respect.
140	P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.
141	P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.
142	C.P. Inlet connection 15mmwith 37 cm long thread and nut
143	Providing and fixing Superior quality CP Brass fittings ofapproved make as per direction of Engineer-in-charge
144	Pillar Cock 15 mm nominal size
145	Swan neck pillar cock 15 mm nominal size
146	Bib Cock with long thread 15 mm nominal size
147	Long body Bib Cock 15 mm nominal size
148	Two way Bib Cock 15 mm nominal size
149	Angular stop cock with long thread 15 mm nominal size
150	Stop cock long thread
151	Stop cock with reduced body
152	Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.
153	Inside size 300 X 300 mm depth upto 0.5 MCement cover with frame.
154	-do- size 600 x 450mm depth upto 0.5 M Cement cover with
155	Supply & Plantation of selected specimen plants including mortality replacement, loading - unloading transportation and maintenance for 30 days after planting the plants (as per scope of work for Horticulture)
156	1.Preparation of soil including cleaning & removing of unwanted shrubs removal ofstones & garbage.
157	2.Supply of dry manure (Farm yard manure organic)
158	3.Supply of Insecticides.
159	4.Digging of pits size 60x60x60 cms. Including removal of stones, Manuring application of insecticides & watering at least 15 liter per plant after planting.
160	5.Watering to plants.
161	6. Maintenance of plants by the contractor including pits, preparation of Thavala Hoeing weeding etc. & application of insecticides etc. & security. If the plant die during maintenance contractor has to replace same height plant at his own cost.
162	Cycus revolata 3\"-4\" Dia
163	Cycus circinalis4\"-5\" Dia
164	Furcraea gigantia 3\"-4\" Dia
165	Juniprus chinensis 5\"-6\" height.
166	Phoenix roebilinii 2\"-3\" ht dia 3\"-4\"
167	Phoenix roebilinii 5\"-6\" height.
168	Phoenix dactylifera 12\"-15\" height.
169	Roystonea venezuelana 10\"-12\" height.
170	Latania loddigesii 5\"-6\" height.
171	Bismarckia nobilis 5\"-6\" height.
172	Washintonia filifera 5\"-6\" height.
173	Wodyetia bifurcata 10\"-15\" height.(Foxtail Palm)
174	Arica Palm 10\"-15\" height.
175	Rhapis Palm 4\"-5\" height.
176	Green vulgaris Palm 10\"-15\" height.
177	Ficus prestige 3\"-4\" height.
178	Ficus king bush 3\"-4\" height.
179	Ficus nuda 4\"-5\" height.
180	Ficus Panda topiary dia 3\"-4\" height.
181	Ficus Black Prince 3\"-4\" height. topiary
182	Ficus Starlight 4\"-5\" height.
183	Ficus benjamina 12\"-15\" height.
184	Plumeria Alba 10\"-12\" height.
185	Plumeria Singapore 4\"-5\" height.
186	Ficus Nitida Topiary 7\"-8\" height.
187	Trimnelia 12\"-15\" height.
188	Bougainvellea Topiary 3\"-4\" height.
189	Schefflera actinophylla 10\"-12\" height.(Umbrella tree)
190	Mangifera indica 8\"-10\" height.(Mango tree)
191	Bayan Tree 12\"-15\" height.(Bargad)
192	Polyalthia longifolia 10\"-12\" height.(Ashok)
193	Calophyllum inophyllum 10\"-12\" height. (Sultan Champa)
194	Liriodendron 10\"-12\" height.(Tulip Tree)
195	Magnolia champaca 5\"-6\" height. (Golden Champa)
196	Melaleuca bracteata 5\"-6\" height. Topiary (Bottle Brush)
197	Juniperus chinensis 5\"-6\"height.
198	Thuja compacta 5\"-6\" height. (Mor Pankhi)
199	Conocarpus 10\"-12\" height
200	Supply & Planting of shady plants (Neem, Peepal, Sheesham, Kachnar, Amaltas, Arjun, Gulmohar, Bargad, Ashok etc.) along road side including the following activities :-a.Preparation of soil including cleaning & removing of unwanted shrubs removal ofstones & garbage. b.Supply of plant at site of two years of age & height not less than 5.00 Mtr.c. Supply of dry manure (Farm yard manure organic)d.Supply of Insecticides.e. Digging of pits size 60x60x60 cms. Including removal of stones, Manuring application of insecticides & watering at least 15 liter per plant after planting.f. Watering to plants for Six Monthsg. Maintenance of plants for Six Months by the contractor including pits, preparation of ThavalaHoeing weeding etc. & application of insecticides etc. & security. If the plant die during maintenance contractor has to replace same height plant at his own cost.
201	Laying of lawns including ploughing leveling breaking ofclods manuring and removal of stones etc. (cost of manure orextra good earth to be paid separately )maintenance of lawnfoe 30 days or more till the grass forms a thick lawns free fromweeds and fit for moving in the duration of planting if lawndie some where the contractor will replant it at his own cost
202	in rows 5 cm apart in either direction
203	lsosnd }kjk fuEu iztkfr;ksa ds \"kcZl dh vkiwfrZ ,os yxkukA ikS/kk LoLFk gksuk pkfg;saA ikS/kksa dh mpkbZ 0-40 ls 0-50 eh- rdA
204	Lalri/Anermi/Golden duranta
205	ELECTRICAL-WORKS :-
206	Supply and erection ofMild steel Swaged tubular pole conforming to IS: 2713-1980 (part I to II) withbase plate, The pole shall be made from steel tube & Pipe (IS:1141, Fe 410) including excavation of the pit and filling the same with C.C. of M-20 grade (1:1.5:3) from base plate to 50 cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals, cable entry with 32 mm dia. \"B\" class GI cable sleeves. After eraction pole shall be painted with two coat of red oxide primer and two quote of enamel paint of silver colour as per the direction of Engineer incharge complete as required of following height & designation.( See Table P - 02 forspecs. ) All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
207	7.5 Mtr. ( 410 SP - 5 )
208	Add for supply and fixing of Pole OEM fabricated Mild steel Overhang of following size over the existing poles, Overhangshall be painted with two coat of red oxide primer and two quote of enamel paint of silver colour as per the direction of Engineer incharge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
209	76.1 mm OD x 3.25 mm thickness
210	Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminummaterial with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass coverand secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver& has a unique BIS R number withInput Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driverEfficiency >85%,THD(I) <10%Humidity 10% to 90% RH Working Temp -5C to 45C .driver current <750mA. The luminaireshall be BIS certified and Trade mark certified. Life ExpectancyEqual or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min = 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs.Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
211	LED Street Light fixture with Minimum lumen output 11225 lm
212	Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as requiredcomplete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
213	Providing & Fixing of IK08IP65 protected Top/Bottom mounted LED Post top Luminarie made of single piece constructionpowder coated die cast alluminium housing with UV stabalized Clear / frosted Polycarbonate diffuser andAluminium anodised with sand blast reflector. The System level Luminous efficacy =100 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N)and efficiency > 85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained . Driver current <750mA.Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
214	Minimum lumen output 4000 lm/40watt Post top Luminarie
215	Providing and fixing of IP 65 protected Polycarbonate / Polysterene fuse box moulded with inside knock outs of following size with hinged cover, transparent window,PU gasket, locking arrangement, duly holded with 2 nos. pole clamps of 20 mm x 3 mm flat with nut and bolts, The box shall be provided with Din rail, 4 / 8 way 10.0 / 16.0sq.mm heavy duty connector, earth terminal,complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
216	125 mm X 200 mm X 122 mm
217	Providing & Fixing of IP - 65 protectedimpact resistant polycarbonate / Polysterene enclosures with knock out for cable entry/out including fixing with nut, bolt, fatner etc as required complete in all respect of following sizes.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
218	320 x 640 x 179 mm
219	Providing & Fixing ofIK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles,of high power LED of 3 to 5 watt each . Integrated potted driver as a unique BIS R numberhaving efficiency more than 85 % and in compliance to BIS certified and Trade markcertificate. The System level Luminaire efficacy >=125 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10%, driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K±355K.Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
220	High Power LED Flood Light Minimum lumen output 14800 lm
221	SITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel as specifications andOther parameters requiredas per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-
222	(a)Thickness of CRCA sheet shallbe 2.0 mm,cable alley compartments having concealed hinged type doors with key type lock with / withoutdetachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided
223	(b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting,pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both side of panel.The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.
224	[c)Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar(>63 amp ) . control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only.All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. ( Cost of Bus bar/ Flexible wire for Interconnection between Main busbar and Switchgearis to be Paid Extra )
225	(d)Wiring between components within switchgear and Incoming / outgoing cableshall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.
226	(e)All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.
227	(f)Floor mounted panel shall be mounted on Base frame of ISMCchannel size 100 x 50 x 5 mm( to be paid Extra )
228	(g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out.
229	(h) only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted)All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
230	Providing & Fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and AC1 rating of 16-20 amperes including making connection, programming conforming to IEC 60730-1 and 60730-2-7 etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
231	One day reserve (Analog type )
232	Providing & Fixing ofAC operated heavy duty 230 /440 Volt power contactor as per PWD specification for electrical Works, ISI marked IS/IEC 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, Din rail mounting type including making connections, testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
233	3 pole Power contactorswith following AC 3 Rating
234	95 Amp
235	SITC of3 /4pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator,line load interchangeability,designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree,pollution degree 3, having positive isolation capability, push(test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage690 V.provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.OEM shall have submitNABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR
236	3 pole MCCB With Thermal Magnetic release
237	up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C setting,
238	160 Amp , 25 kA, adjustable O/L & adjustable S/C setting,
239	Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles,making connection with GI/Cu purity purity >95%thimble etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
240	10 SWG G.I. ( Hot Dipped) Wire
241	Supply & Laying following size\" B \" class ,G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with accessories like bend, socket etc.for laying earth conductor/ strip / cable in ground/ surface/ recess as required.All as per pre approved by Engineer in charge.(Earth Excavation will be Paid Extra)All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annex ure \"A\" attached with this BSR .
242	32mm dia
243	80 mm dia.
244	Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) includingtesting etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR
245	10.0 Sq. mm
246	4 core
247	25.0 Sq. mm
248	3.5 core
249	Supplying and making one end termination with Nickel plated heavy duty brass single compression gland (as per IS 12943-1990)) SIBG type consisting of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring,Compression Nut,heavy duty aluminium lugs (as per IS 8309 -1993) duly crimped with crimping tool, PVC tape as perIS 8337-1976offollowing size ofPVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
250	4 x 10.0 sq.mm
251	3.5 x 25.0 sq.mm
252	Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR
253	Single pole MCB (With B/C curve tripping Characteristics)
254	6 A to 32 A rating
255	Triple pole MCB(With B/C curve trippingCharacteristics)
256	50/63 A rating
257	P / L of Double wall corrugated HDPE pipe confirming to IS : 16205 P-24, Stiffness Class750 N,Externally corrugated and having smooth surface insidewith HDPE Coupler, Elbow, Teeat required Depth below the ground for laying cable of followingNominal Outer dia.MFR Test reportfrom NABL accrediated is to be submitted.(Excavation of Earth& Back filling with compaction is to be Paid Extra)All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
258	50 mm
259	Supply and installation of spike of M.S. rod 20mm dia 3.0mtr. long for earthing of (tower/pole) drive into earth by mechanical means sturcture connection the spike with cross arm top hamper PCC pole, lattics tower to earth etc. completeas per technical specification of DISCOM.
260	Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR
261	1 x 2.5 sq.mm
262	1 x 1.5 sq.mm
263	2 x 2.5 sq. mm. + 1x1.5sqmm
264	1 x 10.0 sq.mm
265	Providing & Fixing of 240/415 V isolatorISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage,true contact indication,Red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting,minimum phase termination capacity of 35sq.mm.IP 20 contact protection and fitted in existing distribution board / sheetincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR
266	Four pole Isolator
267	63 A rating
268	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
269	1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
270	Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar by means of SMC / DMC type insulatorwith standard short circuit withstand capacity, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
271	Electrolytic grade Aluminium bus bar 6010 grade
272	S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR
273	Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR
274	Metal door (Three phase) IK-09 and IP-43with Metal end box
275	6 Way
276	Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it\"sISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR
277	Short point (up to 3 mtr.)
278	Medium point (up to 6 mtr.)
279	Long point(up to 10 mtr.)
280	Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it\"s ISI marked (IS:3419-1988)accessories, Hot Dipped GalvanizedModular box of 1.2 mm thick with earth terminal, 10 A modularswitch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR
281	On board
282	Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR
283	Providing & Fixing of energy efficient direct fit (Retrofit)Polycarbonate/ GlasshousingSMD Mid Power LED tube rod(with integral driver & alumn. heat sink ), on existing fixture.system lumen efficacy = 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.=0.95,CRI >80 , life time of minimum35000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
284	1200mm , Min. Lumens output 2000 lmLED Tube rod with Polycarbonate Housing
285	Providing & Fixing ofBEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanConforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .
286	1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 )

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Rajasthan Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Development Works At Rampura Muktidham And Allied Works At Chambal River Front Kota, Kota-Rajasthan

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Development Works At Rampura Muktidham And Allied Works At Chambal River Front Kota, Kota-Rajasthan

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us