|
| 1 | Working Charges |
| 2 | 100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. |
| 3 | 100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals. |
| 4 | 100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes. |
| 5 | 100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes. |
| 6 | 100.12.3:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 25mm diameter nominal bore. |
| 7 | 100.12.4:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 32mm diameter nominal bore. |
| 8 | 100.12.7:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 65mm diameter nominal bore. |
| 9 | 100.12.8:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 80mm diameter nominal bore. |
| 10 | 100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I. |
| 11 | 100.31.1.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class I. |
| 12 | 100.60.8.1:Replacing the chocked / damaged 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing mains, up to a length of 5m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / Brass specials viz. brass ferrule, Elbow, MTA, FTA, couplers etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, safely removing & re-fixing existing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges but excluding cost of water meter and meter box and excluding charges for cutting the concrete / tarred / bituminous roads and as per the directions of the department officers |
| 13 | 100.37.1:Cutting M.S. sheet, pipe and specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete. |
| 14 | 100.37.2:Grinding the cut edges / welded portions in M.S. sheet, pipe and specials by grinding machine including all labour and hire charges of tools etc., complete. |
| 15 | 100.37.3:Welding M.S. sheet, pipe and special by gas or electric plant for three run welding including cost of welding rod / gas, all labour and hire charges of tools etc., complete. |
| 16 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 17 | Cost of Materials |
| 18 | 100.98.236:Supply of PVC Pipe, 10kg/cm2, 90mm Dia. |
| 19 | 100.98.237:Supply of PVC Pipe, 10kg/cm2, 110mm Dia. |
| 20 | 100.98.469:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.0, Size 80mm. |
| 21 | 100.98.470:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.0, Size 100mm. |
| 22 | OD173907/2022-2023:Supply of G.I. pipes 80 mm dia |
| 23 | OD173908/2022-2023:Supply of G.I. pipes 65 mm dia |
| 24 | OD173909/2022-2023:Supply of G.I. pipes, 32 mm dia |
| 25 | OD173910/2022-2023:Supply of G.I. pipes, 25 mm dia |
| 26 | OD173915/2022-2023:Supply of 25 mm GI bend |
| 27 | OD173916/2022-2023:Supply of 25 mm GI elbow |
| 28 | OD173917/2022-2023:Supply ofPN 16 PVC Tee, 90 mm Dia |
| 29 | OD173918/2022-2023:Supply of PVC bend 10 kg/cm2, 90 mm dia, |
| 30 | OD173919/2022-2023:Supply of MTA PN 16, 90 mm dia |
| 31 | OD173920/2022-2023:Supply of FTA PN 16, 90 mm dia |
| 32 | OD173921/2022-2023:Supply of MTA PN 16, 110 mm dia, |
| 33 | OD173922/2022-2023:Supply of 65 mm GI union |
| 34 | OD173923/2022-2023:Supply of 65 mm x 25 mm GI reducer |
| 35 | OD173924/2022-2023:Supply of 65 mm GI elbow |
| 36 | OD173925/2022-2023:Supply of 65 mm ball valve forged |
| 37 | OD173926/2022-2023:Supply of 80 mm x 65 mm GI reducer coupling |
| 38 | OD173927/2022-2023:Supply of 100 mm x 80mm GI reducer coupling |
| 39 | OD173928/2022-2023:Supply of 80 mm flange set |
| 40 | OD173929/2022-2023:Supply of uPVC bend, 110 mm bend |
| 41 | OD173930/2022-2023:Supply of PVC Socket/coupling, 110 mm dia |
| 42 | OD173931/2022-2023:Supply of 65mm GI Bend |
| 43 | OD173932/2022-2023:Supply of 65mm GI Tee |
