Military Engineer Services-MES has published Tender For Repair/Replacement Of Dbs Submain, Wiring Building Security Light, Summer/Winter Appliances And Old Unserviceable Wiring Alongwith Fitting And Fixture At Cams,1 Cbpo, Khyber Line, Iml Under Age E/M Of Ge (South) Delhi Cantt-10. Submission Date for this Tender is 22-06-2023. Electrification Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-06-2023 |
| Sl. No. | Item Description |
| 1 | M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan includingreplacement of gun metal bush, ball bearing where ever required and finally applying one coat of synthetic enamal painting (Spray painting) and writing MES number on ceiling fan. complete all as specified and as directed. Note : Gun metal bush, clamp, shaft, rod, bearing shallbe measured and paid separately as "S&F in repairs" and the rate quoted by the tenderer are deemed to be included accordingly. |
| 2 | All as per Srl item No 1 above, but exhaust fan 450 mm sweep. |
| 3 | All as per Srl item No 1 above, but exhaust fan 230/300 mm sweep. |
| 4 | S&F in repairs ceiling fan Ball bearing of suitable size & model as per sample complete all as specified and as directed. |
| 5 | S&F in repairs U clamp with rubber real for hanging ceiling fans of 1200/1400mm sweep as per sample complete all as specified and as directed. |
| 6 | S&F in repairs Down rod of 1.5 feet height fabricated out of MS pipe 12mm dia heavy duty, duly painted with one coat ofwhite synthetic enamel paint complete all as specified and as directed. |
| 7 | S&F in repairs adjustable blade (set of 3 blades) of Ceiling fans 1200/1400mm swipe heavy dutyas per sample complete all as specified and as directed. |
| 8 | S&F in repairsblade of exhaust/fresh air fans of 230/300mm swipe heavy dutyas per sample complete all as specified and as directed. |
| 9 | S&F in repairsblade of exhaust/fresh air fans of450 mm swipe heavy duty dulyas per sample complete all as specified and as directed. |
| 10 | S&F in repairs Exhaustfan MS Louvers upto 450 mm Size, as per sample up to fourth floor complete all as specified and as directed. Note:-Staircase arrangement for fixing of louvers up to fourth floor shall be arranged by the contractor without any extra cost. |
| 11 | S&F in repairs ceiling fan capacitor of 2.5 mfd complete all as specified and as directed. |
| 12 | S&F in repairs ceiling fan capacitor of 3.5 mfd complete all as specified and as directed. |
| 13 | S&F in repairs fan regulator electronic, stepped type/switchtype, suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed. |
| 14 | S&F in repairs heating element of 1.5 KW including rubber washers (ISI marked) etc as per site requirement complete all as specified and as directed. |
| 15 | S&F in repairs heating element of 2.0 KW including rubber washers (ISI marked) etc as per site requirement complete all as specified and as directed. |
| 16 | S&F in repairs storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) or as per sample for 35/50 litre capacity geysers with collar, duly tested at required pressure complete all as specified and as directed. |
| 17 | S&F in repairs storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) or as per sample for 25 litre capacity geysers with collar, duly tested at required pressure complete all as specified and as directed. |
| 18 | S&F in repairs MS base plate assembly 20 SWG heavy duty suitable for 35/50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site As per sample complete all as specified and as directed. |
| 19 | S&F in repairs MS base plate assembly 20 SWG heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site as per sample complete all as specified and as directed. |
| 20 | S&F in repairs safety plug and nut for high pressure release as per sample complete all as specified and as directed. |
| 21 | S&F in repairs PVC insulated FRLS single core with stranded copper cable of size 1.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed. |
| 22 | S&F in repairs PVC insulated FRLS single core with stranded copper cable of size 2.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed. |
| 23 | S&F in repairs PVC insulated FRLS 3 core with stranded copper cable of size 2.5 Sqmmfor any type of wiring as per site requirement complete all as specified and as directed. |
| 24 | S&F in repairs PVC insulated FRLS 2 core with stranded copper cable of size 1.5 Sqmmfor any type of wiring as per site requirement complete all as specified and as directed. |
| 25 | S&F in repairs PRCD 16 AMP, 30 mA plug Top complete all as specified and as directed. |
| 26 | S&F in repairs MS top & bottom cover for geysers of 25/35/50 ltrs capacity any make as per sample duly painted with two coats of Synthetic enamel spray paint (first quality) and write down the MES number as per existing complete all as specified and as directed. |
| 27 | S&F in repairs MS outer cover for geyser made out of MS sheet suitable for upto 50ltrs capacity geyser vertical/horizontal type complete all as specified and as directed. |
| 28 | S&F in repairs geyser syphon assembly set complete with inlet, outlet and thermostat including rubber gasket for geyser of 25 litres capacity as per sample complete all as specified and as directed. |
| 29 | S&F in repairs MS fastner bolt 8 mm dia and upto 150 mm long for fixing Geyser/Exhaust Fan with nuts and washers complete all as specified and as directed. |
| 30 | S&F in repairs thermostat 9/11" (ISI Marked) for 25/35/50 Litres capacity Geyser as per sample complete all as specified and as directed. |
| 31 | S&F in repairs indicator lamp (Red & Green) 230 volts suitable for Geyser as per sample complete all as specified and as directed. |
| 32 | S&F in repairs PVC connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25/50 ltrs capacity of geyser connection with 2 Nos brass/CP nuts as per sample complete all as specified and as directed. |
| 33 | S&F in repairs MCCB 4 pole 250 Amp 36 KA 415 Volts with breaking capacity 36 KA complete all as specified and as directed. |
| 34 | S&F in repairs MCCB 4 pole 200 Amp 36 KA 415 Volts with breaking capacity 36 KA complete all as specified and as directed. |
| 35 | S&F in repairs MCCB 160 Amps 4 pole 415 volts fixed type with breaking capacity 25 KA 415 Volts, including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and as directed. |
| 36 | S&F in repairs MCCB 125 Amps 4 pole 415 volts fixed type with breaking capacity 16 KA 415 Volts, including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and as directed. |
| 37 | S&F in repairs MCCB 100 Amps 4 pole 415 volts fixed type with breaking capacity 16 KA 415 Volts, including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and as directed. |
| 38 | S&F in repairs MCB TPN 3 pole 63 Amp 415 Volt, "C" Series 10 KA "C" as per site requirement complete all as specified and as directed. |
| 39 | S&F in repairs MCB SPN 40 to 63 Amp 240 Volt, 10 KA "C" all as per site requirement complete all as specified and as directed. |
| 40 | S&F in repairs MCB SPN 32Amp 240 Volt, 10 KA "C" all as per site requirement complete all as specified and as directed. |
| 41 | S&F in repairs MCB SP 6 to 32 Amp 240 Volts, 10 KA, "C" curve all as per site requirement complete all as specified and as directed. |
| 42 | S&F in repairs VTPN DB 8 way double door type for fixing MCCB upto 250 Amps as incomer and MCB as out going with metal door and IP 43 protctions & connecting complete all as specified and as directed. |
| 43 | S&F in repairs sheet metal enclosures for DBs when MCBs to be used VTPN-4 Way, 415V double door with bus bar as per site requirement complete all as specified and as directed. |
| 44 | S&F in repairs sheet metal enclosures for DBs when MCBs to be used SPN-16 Way, 240V without busbar as per site requirement complete all as specified and as directed. |
| 45 | S&F in repairs sheet metal enclosures for DBs when MCBs to be used SPN-8 Way, 240V with busbar as per site requirement complete all as specified and as directed. |
| 46 | S&F in repairs sheet metal enclosures for DBs when MCBs to be used SPN-12 Way, 240V with busbar as per site requirement complete all as specified and as directed. |
| 47 | S&F in repairs single pole and neutral metal clad sheet metal enclosures with 2 pin and earth plug and socket complete with one no MCB SP upto 20 Amps as per site requirment complete all as specified and as directed. |
| 48 | S&F in repairs single pole and neutral metal clad sheet metal enclosures with 2 pin and earth plug and socket complete with one no MCB SPN upto 32 Amps as per site requirment of existing type for AC"s/Geyser complete all as specified and as directed. |
| 49 | S&F in repairs plastic laminated sheet top cover 3mm thick of size 8"x5" fitted with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete as per sample complete all as specified and as directed. |
| 50 | S&F in repairs plastic laminated sheet top cover 3mm thick of size 11"x9" fitted with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete as per sample complete all as specified and as directed. |
| 51 | S&F in repairs earthing complete with galvanized steel earth plate electrode 60cmx60cmx6cm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to GI wire 4 mm as earthing lead by means of nut, bolts and check nuts and washers, GI light grade protection pipe 15 mm dia upto 7.5 M, GI watering pipe 20 mm medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No.5 of SSR Part-I, including earth test point upto panel board complete all as specified and as directed. |
| 52 | S&F in repairs earth continuity conductor/main earthing lead fixed to wall on batten, buried in ground, drawn in conduit pipe or fixed, poles or any other indicate situation for loop earthing etc. as required 4 mm dia galvanised iron wire complete all as specified and as directed. |
| 53 | S&F in repairs LED building security light 45 Watts from existing bracket complete all as specified and as directed. |
| 54 | S&F in repairs GI pipe"s bracket suitable for fixing of bldg security LED light fitting of 45 Watts including grouting and fixing the same on wall for installation of light fitting with necessary clamps, nut, bolts & washer and painting by synthetic enameled good quality paint in white/grey colour over one coat of red oxide primer until unless smoothness of bracket complete all as specified and as directed. Note :- GI pipe should be 25 mm bore with medium grade and the same to be moulded in 45 degree angle at the 1 Mtr height to fix the building security light fitting. |
| 55 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets etc making good disturbed surfaces of walls, floors etc. complete all as specified and as directed. |
| 56 | M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable suitable concealed PVC/MS conduit and including replacment of unsv pressed steel terminal boxes of required size and factory painted with stove enameled black paint with top cover 3mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 Sqmm for earthing) complete all as specified and as directed. Note:- The rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 adn same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash completed. |
| 57 | All as per Srl item No.56 above, but one 3 pin socket outlet, 5/6 Amps, independent, with cable 1.5 Sqmm suitable concealed PVC/MS conduit. |
| 58 | All as per Srl item No.56 above, but 5 Amp socket outlet on same board. |
| 59 | All as per Srl item No.56 above, but for one socket outlet 15 Amps on independent board with cable 2.5 Sqmm size for phase and neutral and 2.5 Sqmm for earthing with through existing PVC/MS conduit. |
| 60 | All as per Srl item No.56 above, but for one light controlled by 2 Way switch using cable 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing with through existing PVC/MS conduit. |
| 61 | S&F switch piano flush type 5/6 Amps SP one way complete all as specified and as directed. |
| 62 | S&F switch piano flush type 5/6 Amps SP two way complete all as specified and as directed. |
| 63 | S&F bell push, flush type 5/6 Amps complete all as specified and as directed. |
| 64 | S&F socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and as directed. |
| 65 | S&F switch piano flush type 15/16 Amps SP one way complete all as specified and as directed. |
| 66 | S&F universal socket outlet 2-in1 (multipurpose) 5 pin 6/16 Amps flush mounted type complete all as specified and as directed. |
| 67 | S&F 0-4 step type electronic regulator for ceiling fan 1200/1400 sweep, 240 V complete all as specified and as directed. |
| 68 | S&F electric bell ding dong any type complete all as specified and as directed. |
| 69 | S&F ceiling rose surface bakelite 65x25 mm two to three terminals complete all as specified and as directed. |
| 70 | S&F lamp holder bakelite insulated body with back plate suitable for batten fitting complete all as specified and as directed. |
| 71 | S&F in repairs wall mounted LED integrated batten T-5 20 Watt - 4ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type in replacement of old unsv existing 36/40 Watt FTL fitting any type, complete all as specified and as directed. |
| 72 | S&F in repairs wall mounted LED integrated batten T-5 10 Watt - 2ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type in replacement of old unsv existing 36/40 Watt FTL fitting any type complete all as specified and as directed. |
| 73 | S&F in repairs decorative wall light mounting suitable for LED lamp upto 15 Watt complete all as specified and as directed. |
| 74 | S&F in repairs surface mounting round/square shape LED down lighter 12 Watt any type complete with including new flexible wire as requried on site in replacement of old unsv existing ceiling light fitting complete all as specified and as directed. |
| 75 | S&F in repairs LED 10 Watt white bulk head in engineering plastic housing with clear prismatic including required LED bulb and all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete all as specified and as directed. |
| 76 | S&F in repairs LED bulb 15 Watt B-22 Cap, AC 230V, 50 Hz suitable for Batten Holder/Bulk head/SK light fittings in replacement of old unsv lights any type complete all as specified and as directed. |
| 77 | S&F in repairs recessed/surface mounting 36 watt 2" x 2" flat LED panel fitting with soft light and glare free symetrical ilumination suitable for RCC/POP ceiling supplied with wedge bracket to fix in existing ceiling in replacement of existing old unsv CFL fitting any type from ceiling of common areas and making good disturbed surface/POP ceiling to match and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and as directed. |
| 78 | M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit in wall and Existing conduit in ceiling and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etcof required size completeincluding 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified and as directed. Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete. |
| 79 | All as per Srl item No.78 above, but one light /fan/Bell point/security light controlled by one way switch. |
| 80 | All as per Srl item No.78 above, but one 3 pin socket outlet 5 amps on same board. |
| 81 | All as per Srl item No.78 above, but one 3 pin socket outlet 5 amps pointindependent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point. |
| 82 | All as per Srl item No.78 above, but one 3 pin socketoutlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point. |
| 83 | S&F Switch Modular type switch, 6 A 1- way SP switch complete all as specified and as directed. |
| 84 | S&F modular type 2/3 pin combined shuttered type 6A socket complete all as specified and as directed. |
| 85 | S&F Switch Modular type switch, 16 A 1- way SP switch complete all as specified and as directed. |
| 86 | S&F modular type 2/3 pin combined shuttered type 16 A socket complete all as specified and as directed. |
| 87 | S&F in repairs sub-main wiring using single run PVC FRLS grade insulated unsheathed, multisrand copper conductor cable 2 runs of 06 Sqmm for Phase and neutral and 1 run of 06 Sqmm for earth wire drawn through existing PVC/MS conduit and including replacement of unsv pressed steel terminal boxes of in wall as per suitable/existing dia with fittings like tees, bends junction/terminal boxes etc as per site requirement complete all as specified and as directed. Notes : (a) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. (b) Three runs of main cable and one run of earth cable all together shall be considered as one length. (c) New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates. |
| 88 | S&F in repairs sub-main wiring using single run PVC FRLS grade insulated unsheathed, multisrand copper conductor cable 2 runs of 10 Sqmm for Phase and neutral and 1 run of 10 Sqmm for earth wire drawn through existing PVC/MS conduit and including replacement of unsv pressed steel terminal boxes of in wall as per suitable/existing dia with fittings like tees, bends junction/terminal boxes etc as per site requirement and complete all as specified and as directed. Notes :- (a) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. (b) Three runs of main cable and one run of earth cable all together shall be considered as one length. (c) New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates. |
| 89 | Note :- The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
