Tender For Tharamangalam Municipality-Erection Of Borewell At Ward No 26,Keel Chinnagoundampatti Burial Ground In Tharamangalam Municipality.
Tender Value
2.69 Lakhs
Estimated cost
Bid Submission
01 Jun 2023
0 days left
EMD
2690
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tharamangalam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tharamangalam Municipality-Erection Of Borewell At Ward No 26,Keel Chinnagoundampatti Burial Ground In Tharamangalam Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Charges for Geological survey investigation for New Borewell etc complete., as per departmental engineers., |
| 2 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another within Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc.By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit etc complete., |
| 3 | Drilling of 150 mm dia borewellup to casing pipe. |
| 4 | Drilling of 150mm dia bore well beyond casing pipe |
| 5 | Supply and deliveryof 3 HP (50 lpm x 175 m ) Clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS 9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/-10%, 50HZ +/- 5 % etc Complete., TWAD 2021-22 P.No 98 |
| 6 | Supply and delivery of 3 HPIII-Phase panel board D.O.L.with two level guard and auto start as per standard specifications.TWAD 2021-22 P.No.110 |
| 7 | Labour charges for the erection of Horizontal shaft, centrifugal pumpset (coupled/Monoblock) in bore well / Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 meters and delivery pipes to therequired length with valves, pressure guages upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter , Capacitor single phasing preventor and laying and jointing the cables and Twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authories. , SI No-17a- ii) 5 HP Submersible pumpset.TWAD P.No.286 |
| 8 | Supply and Delivery of following specials with ISI making as per standard specifications (MEDIUM) |
| 9 | Supply and delivery of PVC (ISI) Casing pipe suitable for 150 mm dia CS bore well including cost and labour charges etc. complete as per standard specifications.TWAD 2021-22 P.No.22 |
| 10 | Labour charges for inserting casing pipes assembly (With slot or without slot) in the drilled hole including welding the joint etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineer. TWADSOR 2021-22 P.No.280 |
| 11 | 32mm HDPE hose (PWD SOR Page.No.128, Sl.No.1 cc) |
| 12 | Nylon rope10mm thick ((PWD SOR Page.No.105) |
| 13 | Supply and delivery of 4 sqmm. cable PVC insulated and sheathed 3 core flat type copper cable confirming to IS 694/1990 including labour charges etc., complete and as directed by the departmental officers. TWAD SOR 2021-22P.No.116 |
| 14 | 140mm PVC End cap (TWAD SOR 1.50, Sl.No.11) |
| 15 | 50mm PVC Pipe, 6Ksc (TWAD SOR 1.0 Sl.No.II-1 |
| 16 | 50mm PVC Elbow (TWAD SOR 1.50 Sl.No.8) |
| 17 | 50mm PVC Tee (TWAD SOR 1.50 Sl.No.6) |
| 18 | 50mm GM Gatevalve (TWAD SOR 5.20 Sl.No.1) |
| 19 | Bore cap using M.S. Flat of size 1 cm x 3 mm and M.S. sheet on top with bolting arrangements for securing the cap in position (Bore caps with M.S. Couplings need not be made) etc complete.,P.No.278 |
| 20 | 50mm MS Clamp Set P.No.44 |
| 21 | supply and delivery and fixing of 2000 litre HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 22 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 23 | Provision for GST 18 % |
AI Tender Summary
Tender Timeline
May 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 01, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender