Rural Development Department has published Tender For Renovation And Redevelopment Of Krishi Vigyan Kendra With Extention Of Pond And Renovation Of Boundary Wall Under Block Petarwar District Bokaro. Submission Date for this Tender is 31-05-2023. Lake Development Tenders in bokaro Jharkhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Dismantling R.C.C work Including stacking serviceable materils in Countable stacks within 15 M concrete work .do........E/I |
| 3 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as perbuilding specification and direction of E/I. |
| 4 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l. |
| 5 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Providiag designation 75B brick work in Cement Mortar (1:6) in Foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 10 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for lintels beam plinth beam etc |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 13 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes androyalty all complete as per specification and direcition of E/l. |
| 14 | Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. 8 mm |
| 15 | Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I 12mm |
| 16 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 17 | Structural steel work in single section, fixed with or withoutconnecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 18 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I. |
| 19 | Earth work in excavation in canal by the hydraulic excavator as per designed section in all kinds of soil, soil mixed with kankar, pebbles and boulders upto 300 mm size and disposal of spoil upto 10 M with all tipper including constructionand maintanance of haul road all complete as per approved design, specification and direction of E/I. |
| 20 | Earth work in excavation in canal by the hydraulic excavator as per designed section in all kinds of soil, soil mixed with kankar, pebbles and boulders upto 300 mm size and disposal of spoil upto 500 M with all tipper including constructionand maintanance of haul road all complete as per approved design, specification and direction of E/I. |
| 21 | Labour for rolling and Compacting the earth in layer of 225 mm thick at OMCSheep foot roller by tractor do…………..do….. |
| 22 | Earth work in excavation in foundation trenches in Ordnari soil (vide classification of soil item-A) and disposal of excavated earth as obtained (50M away from the edge of the trenches) with initial lead of 150M and initial lift of 1.5M as per specification and direction of E/I. |
| 23 | Providing coarse clean Sand filling infoundation trenches including ramming as well as royalty and all taxes etc., as per specification and direction of E/l |
| 24 | Providing and laying P.C.C or R.C.C M - 150 with nominal mix ( 1:2:4) in various components of dam foundation with approved quality of 40mm graded coarse aggregate of required grade as per design and approved quantity of sand of requisite . F.M (2.5 to 3.0) washed and screened ( excluding cost of shuttering of form work as well as reinforcement, it"s cutting binding and placing) but including necesary tools, plants and vibrating, curing royalty, all taxes etc. complete job as per specification and direction of E/I . |
| 25 | Providing rough dressed ramdam rubble stone masonary in c.m. (1:4) in foundation with approved quality of coarse sand of requsite F.M . Washed and screened with racking out joints, curing, scaffolding and its removal where ever required including royallty and all taxes etc. complete job as per specification and direction of E/I . |
| 26 | Providing random rubble stone masonry in C.M. (1:4) in superstructure with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening of materials, scafolding, raking out joints to 20mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 27 | Providing 25 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 ircluding screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 28 | Labour for laying,fitting and fixing R.C.C NP2 300 mm hume pipe with collar inline, level and grade, as well providing approved jointing materials and joints properly filled to make them water proof all complete as per building specification and direction of E/l. |
| 29 | Supplying of R.C.C NP2 300 mm dia hume pipe with collar as per I.S.S.458-1971 -do-all complete as per building specification and direction of E/l |
| 30 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 14.90.1 3 mm thic |
| 31 | Dismentling of old plaster and pointing in cement or lime and racking out joint to 15 mm depth watering and disposal of unserviceable materials with all lead---do -- all complte job as per specification and direction of E/I |
| 32 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 33 | Providing 12mm cement plaster (1:6) on Inside walls with clean coarse sand ofF.M 1.5 including cost of carriage, screening curing with all lead and lifts of water, scaffolding, taxes and royalty all complete as per building specifications and direction of the E/I. |
| 34 | Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 35 | Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. 8 mm |
| 36 | Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/IB.C.D. S.O.R. Item No. 5.5.5 (a) : 10mm dia Bar - |
| 37 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. |
| 38 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. |
| 39 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre D.S.R 13.85.3 |
| 40 | providing two coats of plastic emulsion paint of approved shade and make over old surface |
| 41 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 42 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)Acid and alkali resistant tile |
| 43 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades |
| 44 | Supplying ,fitting and fixing 30 mm thick solid core non decorative double leaf flush shutter .do....... |
| 45 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality |
| 46 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm,pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 47 | Providing and laying doublecharge vitrified floor tiles in different sizes(thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622/ISO 13006 of approved make,inall colors and shades,laid on 20mm thick cement mortar 1:4(1Cement:4coars sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc, cost of curing, taxes and royalty all complete as per building specification and direciton of E/l. |
| 48 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface.......do..........do.....E/I |
| 49 | Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I "p" trap 15 liters C.I. or C. pull and let go flushing cisternofnames or other I.S.S equivalent make, complete with all fittings. C.I or C.Cbrackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull includingsupplyingand fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. |
| 50 | Providing and supplying in standard length H.D.P.E Pipe 125 dia mm Pipe |
| 51 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 52 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engine er-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm |
| 53 | Providing Green. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required0.63 mm thick with zinc coating not less than 275 gm/m² |
| 54 | Wiring for light point / exhaust fan point / callbell point with 1.5 sq .mm FRPVC insulated copper conductor single core cable in surface / recessed PVC Conduct, with piano type switch, phenolic laminated sheet, suitable size PVC/G.l. box etx. As |
| 55 | Wiring for Circuit / submain wiring along with the following size PVC /insulated copper conductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required. 2x1.5 sq mm+1x1.5 sq mm earth wire |
| 56 | 2x2.5 sq mm+1x2.5 sq mm earth wire |
| 57 | Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connectionsas required. 15/16 amps , two way switch |
| 58 | 5/6 amps , 3 pin socket outlet |
| 59 | Supplying and fixing suitable size G.I boxwith modular plat and cover in front on surface or in recess with including provideng and fixing 3 pin 5/6 amps modular socket out let and 5/6 amps modular type switch in connection painting etc as required. |
| 60 | Supplying and fixing suitable size G.Ibox with modulaer plate cover in front on surface or in recessin front including provideng and fixing 6 pin 15/16 amps socket out let and 15/16 amps modulaer switch in connection painting etc as required. |
| 61 | Installation exhaust fan upto 230mm sweep in the existing opening including making the hole to suit the size of theabove fan making good the damage connection testing commissioningetc.as required. |
| 62 | Supplying & fixing following way single pole neutral sheet MCB distriution board 240 volts on surface / recess complete with tinned copper busbar neutral busbar earth bar din bar detachable gland plate interconnection phosphatized powder painted includin 2 Way Single door |
| 63 | 20/22 Watt LED Tube Light |
| 64 | Carriage of Materials Cement- |
| 65 | Sand- |
| 66 | Stone Chips- |
| 67 | Steel |
| 68 | Bricks |
| 69 | Boulder |
| 70 | Hume pipe |
| 71 | Add. 18% GST |
| 72 | Add. 1% Labour Cess |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
