Tender For Construction Of Solar Water Resarver At Bengkandi Samsad No X (Telipara In Front Of Parimal Roy) (Sl.No-01)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 May 2023
0 days left
EMD
6630
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
maynaguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Solar Water Resarver At Bengkandi Samsad No X (Telipara In Front Of Parimal Roy) (Sl.No-01)
BOQ
| Sl. No. | Item Description |
| 1 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multi layer-2000 litre Capacity |
| 2 | Earth work in excavation for foundation trenches in all sorts of soil including removing spreading of staking the spoils within a lead of 75m as directed including trimming the side of trenches leveling, dressingand ramming the button, bailing a) Depth of excavation not exceeding 1.50 m Foundation |
| 3 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and fitting joints with powdered earth or local sand. |
| 4 | (I) Cement concrete with graded stone ballast (40 mm size excludingshuttering) (B) With N.B. Variety stone metal. |
| 5 | Ordinary cement concrete ( mix 1:1.5:3) with graded stone chips (20mm down excluding shuttering and reinforcement,if any in ground floor. As per relevent I.S. Codes. |
| 6 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering Foundation |
| 7 | Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete.(a) For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia.(upto 50 metre(i) First 50 metre |
| 8 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conformingto ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(iv) 100 mm dia |
| 9 | Supplying high density polythene strainer of approved make with adapterconforming to I.S. specifications.(iv) 100 mm dia |
| 10 | Washing and developing TUBE well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required |
| 11 | Reinfocement for reinforced concrete work in all sorts of strutures including distribution bars stirrups. Binders etc. including supply of roads intial straightening and removal of lose rust (if necessary), cutting to requisite lengh hooking and bending to concrete shape, placing in proper position andbinding with16 gague black annealed wire an inter-section complete as per drawing and direction (b) Extra foe works beyound the roof of ground floor/intial 4.0m (i) upto 4th floor roof in each addi FloorSAIL/TATAL.S |
| 12 | Supply, delivery & installation of 1800 watt peak capacity Solar Photovoltaic aray panels along with 2.00 H.p. capacity Solar Photovoltaic Submerssable pump set (1800 Watt, designed to use with Solar Power) that can deliver from 1 gallon (3.79 litrs) per minute to over 75 gpm.installed with in a New Tube well of approved brand whose output is not less than 4000 Ltrs/hour at 40 Mtrs. head including supply of all necessary materials viz. required dia column pipes etc. as specified of approved quality. labour etc. with all allied works as per direction of the E.I.C. (Solar Photovoltaic Submerssible Pump and controller should carry a warranty at least of 1 (one) year directly from the manufacturers)[ Specifications: Motor: Permanent Magnet, Thermally Protected, 24 Volts DC,120 Watts,4.0 Amps Max,Fuse: 7.5 Amp, Automotive Internal Bypass: 105-110 P.S.I. Max 12\"L x 3.75\"D 6 lbs. Maximum Lift: 230 feet, Maximum Submersion: 100 feet .] |
| 13 | Installation of pump, riser pipes, connecting rods, brass cylinder etc if required including supplying the required quantity spare parts of approved quality and fitting the same in position by engaging expert tube well mechanic & helper with necessary tools & plants after lowering of Solar Photovoltaic submersible pump set. |
| 14 | Solar Iron Purifire MachineThe Water Purifier Machine remove the iron and other impurities from the water and also kills bacteria through a UV lamp. The enter power comes from solar energy and there is no battary storage. The solar energy is stored in the form of pure water which will be adequate for two days of backup. |
| 15 | M.S structural works with hollow sections (square or rectangular shape) ccntorming to IS 806-1968 & IS 1161-1998) connected to one another with bracket. gusset, cleat as per design, drawing& direction oft Engineer-in-Charge complete inciuding cuting to requisite sliape & size. fabrication includung metal arc welding conforming to IS. 816-1969 &IS 9595 using electrodes of approved make and brand contorming to IS 814- 2004, haulage, hoistng and erecton all complete The rale includes the cost of all MS Hollow section, al consumabies such as electrodes gas and hire charges of all tools and plants and labour reqired tor execution and all ncidental chages (such as electricty, labour insrance) etc. complete Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS|code in finished wor. Payment for gusset. bracket, cleat may be made by addingthe actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 .2nd flcor levei from the grcund. Add 15 % extra over the rate for each additional floor or 4m beyond the initial 8 m or part thereof |
| 16 | Suppiying. titting and fixing PVC pipes of approved make of Schadule 80 imediumm duty) contorming to ASTMD 1785 and threaded to mateh wtn GI Ppes as per 1S 1239 (Pant 1). witn il necossary accessories specials VI2 SOcket bend. tee union, ross, elibo, nipple longscrew educng sOcket. reducing tee. sthort piece etc itted with holder bats| clamps, including cutüing pipes. makung threads fitung. fixing etc.| COI\"1plete n ai respect including cost of all necessury titings as tequired jonting materials and twO Cvats of paint1rng with approved paint| in any position albove ground iPayment will be made on the centre line measirements of total pipe ine ncluding9 all specials. No separate oayient will be mase for accesOties. specals Payment for painting will be (made Seperatelya) For Exposed Worh PVC Pipes |
| 17 | Supply ,fiting & fixing bib cock or stock cock |
| 18 | Sign Board |
| 19 | Supply of well ring at site including loading ,unloading & carrying etc. (900mm dia & 0.30 m height ) |
| 20 | Supply of well ring cover at site including loading,unloading & carrying etc. (900mm dia each cover) |
| 21 | Adding GST @ 18 % |
| 22 | Adding CESS @ 1 % |
AI Tender Summary
Tender Timeline
May 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender