Tender For Modification Of Winch Machine, Replacing Of Rubber Seal And Painting Works At 3Nos.Spillway Gate Of Parga I Scheme In The Dist.Of Purulia.
Tender Value
2.59 Lakhs
Estimated cost
Bid Submission
07 Jun 2023
0 days left
EMD
5196
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
purulia → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Modification Of Winch Machine, Replacing Of Rubber Seal And Painting Works At 3Nos.Spillway Gate Of Parga I Scheme In The Dist.Of Purulia.
BOQ
| Sl. No. | Item Description |
| 1 | Cost for dismantling different types rubber seal from gate shutter as per direction of E.I.C. The cost includes cost of man power employed for dismantling, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading &a) Gate shuteer size upto 10 Sq.m |
| 2 | Cost for supplying and fifling fixing of Flat rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/ S B Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate shutter as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.f) 100 x 14 mm |
| 3 | Cost for replacement of new flat type neoprene side rubber seal of size 150mm(w)×12mm(t)as per IS-11855-1986 with M.S. Flat of size50 mm. x 06mm. , G.I. CS Bolts & Nuts with wahser of size dia = 1/2\" L=2.5\", araldite for rubber seal corner joint as required rubber seal as given below, the cost includes materials cost, welding & drilling cost, hire charges of T&P, transportation, man power etc. to complete the job at site as per direction of E.I.C. |
| 4 | Supplying of M.S flat for clamping Rubber seal with hole as perdirection of EIC |
| 5 | Supplying of M.S bolts with nut for clamping Rubber seal as per direction of EIC |
| 6 | Cost for removing of old paint, rust, foreign contaminants etc. from dismentalled gate shutter, hoisting arrangement,electrical panal,pipes by scrapping, cleaning, rubbing, chippingby any means & preparing the surface to receive new coat of paint. The cost including cost of materials, labours, etc. to complete the job at site as per direction of E.I.C.( For fitted gate shutter ,cost of scaffolding to be added.) |
| 7 | Cost for supplying &application of Primer with Epilux - 610 Primer Grey of approved brand on cleaned surface of dismentelled gate shutter,panel box including thinner Epilux - 844 brush & other materials as required, labours,brush, compressor, painting equipments etc. to complete the work at site as per direction of E.I.C..( For fitted gate shutter ,cost of scaffolding to be added.)a) For 1st coat of Primer ( Epilux-610) ( Manual painting) |
| 8 | Cost for supplying & application of Paint with Epilux - 5 coal tar epoxy of approved brand on cleaned surface of dismentelled gate shutter,panal, pipe including thinner Epilux - 844, brush & other materials as required, labours, brush, compressor, painting equipments etc. to complete the work at site as per direction of E.I.C..( For fitted gate shutter ,cost of scaffolding to be added.) |
| 9 | a)For 1st coat of Paint ( Epilux-5) ( Manual painting) |
| 10 | c)For 2 nd coat of Paint ( Epilux-5) ( Manual painting) |
| 11 | Dismantling of following items of rope drum hoisting system for replacement by new one as mentioned below as per direction including cost of Materials, Machinaries , Manpower, T & P and all overheads with all leads and lifts complete as per specification. |
| 12 | Bush |
| 13 | Shaft |
| 14 | Rope |
| 15 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, ligning, nchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) |
| 16 | Plumber Block/Pillow Block/Bearing Housing (FG 400) |
| 17 | a) Self aligning ball Bearing (S.K.F) for shaft size = 40 mm dia (1208 ETN-9) |
| 18 | b) Self aligning ball Bearing (S.K.F) for shaft size = 50 mm dia (1210 ETN-9) |
| 19 | Supplying, fifling & fixing of winch machine of suitable capacity having compound gear train comprising of open spur gears/pinions of required nos, plummer/ pillow block , CI bush, shafts, rope drum, MS frame, MS cover along with locking arrangement as per approved drawing & direction of Engineer in charge. |
| 20 | g) Poul Ratchet Locking rrangement |
| 21 | Servicing & maintenance of winch M/C i.e. cleaning the gears, plummer block including bearings , rope drum etc with the help of Kerosine, jute, cloth, sand paper, emery paper etc, application of grease, mobil oil in the bearings of plummer blockfor proper lubricating and supply and fitting, fixing of damaged oil seals & missing Nut & Bolts etc. to complete the job at site as per direction of Engineer in charge. |
AI Tender Summary
Tender Timeline
May 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 07, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 08, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender