|
| 1 | Earth work excavation in foundation in all kind of soil within 50m. Initial lead and 1.5m. Initial lift icluding rough dressing and bracking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m. in depth and as per the direction of the EIC.15 |
| 2 | Fine dressing of earth work in ordinary or hard soil in road formaton according to the direction of the department including cutting or filling earth upto 0.15 m depth of surface16 |
| 3 | Providing spreading, filling in foundation and plinth with sand watered and rammed as per OPWD specification including cost of materials, labour, conveyance, royalty, Tools and Plants etc all complete required for the work to finished items of work. 18 |
| 4 | Cement concrete (1:3:6) with 40 mm size hand broken hard granite metal including cost of materials, labour, conveyance, royalty, Tools and Plants water for curing etc.all complete as per OPWD specification required for the work to finished items of work. 37 |
| 5 | Fly ash bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than 75 Kg/cm2 incement mortar (1:6) in foundation and plinth including cost ofmaterials, labour, royalty, conveyance,Tools and Plants, water for curing etc. all complete as per OPWD specification required for the work to finished items of work. 95 |
| 6 | Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 incement mortar (1:6) in Super structure including all cost ofmaterials, labour, conveyance, royalty, Tools and Plants, water for curing etc. all complete,as per OPWD specification required for the work to finished items of work. |
| 7 | Cement concrete work of M20 grade with 20 mm and down grade crusher broken hard granite chips including hosting and laying, cost of materials, labour, conveyance, royalty, tools and plants, water for curing etc.all complete as per OPWD specification required for the work to finished items of work. 57 |
| 8 | Requirement of HYSD/ MS rod & labour for cutting, bending, binding, straighting and laying the grills and placing in position including cost of rod &binding weir 18 to 20 gauge62 |
| 9 | Rigid and Smooth centering and shuttering for RCC works including false work and dismentalling then after casting including cost of materials complete in ground floor.64RCC foundation, plinth band & footings bases of columns mass concrete pre-cast slabs etc67 |
| 10 | Rigid and Smooth centering and shuttering for RCC works including false work and dismentalling then after casting including cost of materials complete in ground floor.64RCC Lintel 69 |
| 11 | Rigid and Smooth centering and shuttering for RCC works including false work and dismentalling then after casting including cost of materials complete in ground floor.64RCC beams, column, grider and bressmer, etc 68 |
| 12 | Rigid and Smooth centering and shuttering for RCC works including false work and dismentalling then after casting including cost of materials complete in ground floor.64RCC floor and roof slabs, landings,balconies, projecting sun shades and chajjas65 |
| 13 | Supplying, fitting and fixing ceramic tile in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excludingcost of precast tiles127 |
| 14 | Fixing Ceramic tiles in dados skirting and risers of stepson 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. 133 |
| 15 | 12mm thick cement plaster (1:4) over brick work with cement punning for skirting 177 |
| 16 | 12mm thick cement plaster in cement morter (1:6) including cost of rayality, conveyance etc all complete179 |
| 17 | 6 mm thick cement plaster in cement morter (1:4) including cost, rayality, conveyance etc all complete 174 |
| 18 | 12 mm thick CP (1:4 ) over brick work including cement punning and bituman painting including cost of conveyance royalty etc. all complete. 178 |
| 19 | 2.50 cm thick grading concrete gradient (1:2:2) on roof slab with 6 mm size hard broken granite chips on new works including cost of conveyance royalty etc. all complete. 41 |
| 20 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the EIC.18 |
| 21 | Finishing surface of walls with cement based wall putty (water based) and wall primer of approved make and finished smooth and even surface to receive cement paint water bound including cost of caffolding staging charges with cost of all materials taxes, labour T&P etc complete.280 |
| 22 | Finishing walls with water proofing cementpaint of approved shadetwo coats to give an even shade including cost of paint and labour etc all complete. with approved paint and primer, cost of labour and materials ect. all complete. 153 |
| 23 | Finishing walls with two coats water proofing weather coat of approved makeincluding cost of caffolding staging charges with cost of all materials taxes, labour T&P etc complete. 158 |
| 24 | Painting two coats with approved paint and primer including cost of labour and materials ect. all complete. 151 |
| 25 | Labour for fitting and fixing of MS window grills as per approved designincluding cost of all materials complete and directon of EIC.296 |
| 26 | Providing fitting, fixing of Al door with anodized Al door section of 9202 as vertical member, 9201 as top , 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including cost of labour, T&P hire charges of drilling machine, labour charges, laminated board etc 278 |
| 27 | Providing, spreading, laying on road surface and compacting, proper camber layer of paver inter locking blocksminimum 60 mm thickness and inscribed machine mixed and compacted having crushing strength not less then M30 including filling the interstices with sand, watering, brooming, bliding and consolidation with wooden hammer as per OPWD specification and relevent code including cost of materials, conveyance, royality, labour, cess, T&P required to the work etc. complete to finished items. 95 |
| 28 | Requirment of MS door, window & grill and its cost etc298 |
| 29 | Requirment of SS grill gate and its cost etc298 |
| 30 | Supplying all labour, T&P and transporting the boring pipes, PVC pipes, top casing and grouting pipes and necessary fittings, well screens ,cement, bentonite powder and gravels etc from Deptt.store to the work site & return of Deptt. materials after use including loading and unloading etc complete in all respects as per the direction of the EIC. 479 |
| 31 | Supplying all labour, T&P and drilling pilot bore not less than 102 mm dia withoutcasing pipes in all kinds of soil and rocks for the following depth excluding supply of necessary cutting equipments, extra sockets etc and withdrawing the boring pipes, washing and keeping the bore clear for lowering if required etc all complete as per direction of EIC. 480(A) Drilling50 mm dia of pilot bore from0.00 m to 25.00 mtr |
| 32 | Supplying all materials labour T&P and jointing materials and lowering the PVC casing pipes including fitting & fixing the well screen in positoin including fitting fixing of centraliser, cutter plug and washing the bore asper direction of EIC. 481 (A) Casing pipe 50 mm Dia PVC casing pipe from 0.00 mtr. To 10.00 mtr (Sch-80) |
| 33 | (B) 50 mm dia PVC strainer (1nos @2.00 mtr Each) (Market rate) 482 |
| 34 | Supplying all labour T&P including developing the tube well with 8 hours continious pumping per day seven consecutive days and free clear water is obtained etc. all complete as per direction of EIC. (Considering one labour for a week period) 483 |
| 35 | Supplying all materials, labour T&P and fitting, fixing of the following PVC fitting etc all complete as per direction of EIC. 484(A) 50 mm dia conical end plug at bottom of the casing pipe |
| 36 | Supplying all materials, labour, T&P and fitting fixing of shallow hand pump Tubewell etc all complete with all accessories as per the direction of EIC. 485 |
| 37 | Supplying all materials, labour, T&P for construction of tube well plat form with CC (1:2:4) using 12 mm size hgcbchips ete complete with all accessories as per the UNICEF specification &direction of EIC. 486 |
| 38 | Requirement of0.5 PH pump set and fitting 487 |
| 39 | 3.2.5- Providing and laying in trenches unplasticised PVC pipes confirming to IS-4985/ 2000 of class III (6 kg/cm2) of the following nominal bore and pipe fittings including testing as per specification complete (E/W in trenches to be measured paid for separately) 390 |
| 40 | 3.3.2- Providing and fixing on wall face unplasticised rigid PVC soil, waste and rain water pipes conforming to IS:13592 type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes420 |
| 41 | 3.2.7- Providing and laying in trenches PVC pipes confirming to ASTM-D-1785/ 89 (Sch-80) of the following nominal bore and pipe fittings including testing as per specification complete (E/W in trenches to be measured paid for separately |
| 42 | 3.1.4- Providing and fixing to wall or ceiling and floor PVC pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification completeASTM Sch- 80 25 mm Ø |
| 43 | 3.1.4- Providing and fixing to wall or ceiling and floor PVC pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete ASTM Sch- 80 20 mm Ø |
| 44 | 3.1.8- Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extras ockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the EIC. 367 |
| 45 | Construction of brick masonary work stagging of syntex with brick work in cm (1:6), plastering in cm (1:4) and cement puuning including all cost, taxes, royalty, conveyance etc all complete. |
| 46 | 3.1.11- Supplying all materials, labour and T&P for cutting holes in RCC floors and roofs upto 19 mm thick including making good and leak proof for taking GI pipes/ PVC pipes and fittings. 369 |
| 47 | 3.1.12- Supplying all materials, labour and T&P for cutting grooves in pucca floor and walls for taking GI pipes and fittings/ PVC pipes and fitting and making good to the damages |
| 48 | 3.2.13- Fixing ferrule conforming to IS:2692-1978 of 15 mm dia nominal bore including drilling the water main (Cast Iron pipes or pipes with the metal straps) as per Specification complete. 393 |
| 49 | 3.2.14 (vi)- Fixing of 15 mm dia CP brass screw down long body bib cock (Tap) polished bright confirming to IS 781-1995 of the following nominal size as per specification complete 394 |
| 50 | 3.2.14 (vii)- Fixing15 mm dia CP Flange polished bright confirming to IS 781-1995 of the following nominal size as per specification complete 395 |
| 51 | 3.2.14 (viii)- Fixing of 15 mm dia CP extension piece 25 mm long polished bright confirming to IS 781-1995 of the following nominal size as per specification complete 396 |
| 52 | 3.2.17- Fixing of brass ball valve (Horizental plunger type) confirming to IS 1703-1977as per specification complete. |
| 53 | 3.2.18- Fixing of brass ball valve 25 mm dia (Horizental plunger type) confirming to IS 1703-1977as per specification complete. |
| 54 | 3.4.1- Fixing Water closet squatting pan (Indian type WC pan) confirming to IS 2556 Part 3-2004 duly embeded in cement concrete 1:4:8 (using hbg metal 4 cm size ) all complete as per specification (Earth workbed concrete pan foot rest and trap to be measure and paid separately. 439 |
| 55 | 3.4.3- Fixing 100 mm size \"P\" or \"S\" trap (with horn or without horn ) for water closet squeting pan including jointing the trap with pan in morter (1:1 ) as per specification 440 |
| 56 | 3.4.6- Providing and fixing PVC Low flushing cistern with manually controlled device (hand lever) confirming to IS 7231 with all fitting and fixing etc. all complete as per specification. 443 |
| 57 | 3.4.11- Fixing wash basin with hole for Piller Taps confirming to IS 2556:Part 4-2004 with Cost iron or M.S brackets painted while including cutting holes in walls and making good the damages etc all complete as per specification. 446 |
| 58 | 3.4.20- Fixing PVC waste pipe of semi rigid PVC waste pipe 32 mm dia with length not less than 700 mm with PVC waste fittings nominal diameter for wash basin or sink including brass check nut complete as per specification 447 |
| 59 | 3.4.22- Fixing 15 mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification 449 |
| 60 | 3.4.23- Fixing Chromium Plated brass waste of the following nominal diameter for wash basin and sink as per specification 450 |
| 61 | 3.4.26- Fixing 600 mmx 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification. 452 |
| 62 | 3.4.27- Fixing standard sized glass- shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification. 453 |
| 63 | 3.4.28- Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass crews, complete as per specification. 454 |
| 64 | 3.4.30- i) Fixing (a) Liquid Soap Container– Glass containeror Plastic container with Chromium Plated brass lid and brackets fixed to wooden plugs with Chromium Plated brasss crews or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screwsor (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification. 455 |
| 65 | 4.1.1-Providing and laying in trenches UPVC pipe class III (6kg/cm2) 75 / 110 mm dia ODPVC as sewer line and alinging to requisite gradients inside the trench, jointing with solvent cement cement with 0.08 mt sand filling in bed, 0.10mt CC (1:4:8) using 40mm size hbg metal in bed and 466 |
| 66 | 4.2.10- Supplying all materials, Labour, T&P, for construction of Inspection Chamber of size 0.75 m x 0.75 m, 0.65 m deep with 100 mm thick cementprecast RCC slab in CC (1:11/2:3), 100 mm thick sand filling in foundation, 150 mm thick CC (1:3:6) using 40 mm size hbhg metal in foundation, KB brick masonry in CM (1:4) using 25 cm size brick, inside plaster 12 mm thick in CM (1:4), neat cement punning, outside plaster in CM (1:3), CC (1:2:4) with neat cement punning for benching, channeling and brick wall top including earth work in excavation, earth filling with excavated earth to outside cavity of chamber etc complete. 477 |
| 67 | 3.3.3- Providing and fixing on wall face UPVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving10 mm gap for thermal expansion (i) Single socketed pipes. 421 |
| 68 | 110 mm Couplers |
| 69 | 110 x 110 x 110 mm PVC Tee without door |
| 70 | 110 x 110 x 110 mm PVC Tee with door |
| 71 | Cost of disply board, Paint & Letter writing over disply board - LS |
