Tender For Repair And Renovation Work For Establishment Of Block Public Health Unitunder Scheme Of Block Levelat C.H.C. Ramnagar District Chitrakoot
Tender Value
28.92 Lakhs
Estimated cost
Bid Submission
08 Jun 2023
0 days left
EMD
58000
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ramnagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Renovation Work For Establishment Of Block Public Health Unitunder Scheme Of Block Levelat C.H.C. Ramnagar District Chitrakoot
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Jun-2023 | CORRIGENDUM | Date | 08-Jun-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-InCharge within a distance of 60 meters (200 feet). |
| 2 | Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). |
| 3 | Dismantling cement concrete or brick or granolithic floors including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). |
| 4 | Dismantling doors and windows including stacking of materials as directed by Engineer-In-Charge with a distance of 60 meters (200 feet). 1 |
| 5 | Dismantling existing plaster including disposal of refuse as directed by Engineer-In-Charge within a distance of 60 meters. |
| 6 | Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m.(5 fts.) and lead upto 30m.(100 fts.) & including filling. watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-incharges upto a distance of 30 m.(100 fts.) from the foundation trenches. |
| 7 | Sand filling in plinth excluding supply of necessary quantity of sand from a distance not excceding 8 km. (5 miles) from the site of work and including watering, ramming,dressing etc. rate to include cost of all materials, labour and T & P etc. required for proper completion of the work |
| 8 | Providing and laying Cement concrete 1:4:8 (1 cement : 4coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation |
| 9 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\") gauge approved stone ballast in the proportion of 1:1.5:3 (M-20) in lintels of doors and windows excluding supply of reinforcement and its binding but B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc.required for proper completion of the work. Binding wire cost being included in the item M-20 |
| 10 | M-150brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour, and T & P etc.required for proper completion of the work. |
| 11 | M-150brick work in 1:6 cement and coarse sand of 2.25 coarseness modulus mortar in super-structure. Above plinth level up to floor two level (up to two storey) including necessary cutting and molding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. |
| 12 | M-150brick work in 1:4 cement and coarse sand of 2.25 coarseness modulus mortar in super-structure. Above plinth level up to floor two level (up to two storey) including necessary cutting and molding of half of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. |
| 13 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\") gauge approved stone ballast in the proportion of 1:1.5:3 (M-20) in lintels of doors and windows excluding supply of reinforcement and its binding but B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc.required for proper completion of the work. Binding wire cost being included in the item M-20 |
| 14 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\") gauge approved stone ballast in the proportion of 1:1.5:3 (M-20) in beams excluding supply of reinforcement and its binding but B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc.required for proper completion of the work. Binding wire cost being included in the item M-20 |
| 15 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\") gauge approved stone ballast in the proportion of 1:1.5:3 (M-20) in slab excluding supply of reinforcement and its binding but B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc.required for proper completion of the work. Binding wire cost being included in the item M-20 |
| 16 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work(whennot includedin anover all rates )wroughttorequired shape as necessary including bending for proper completion of thework andincluding supply of steel itswastage and over lapping and hookes required for completion of the work TMT Fe 500 |
| 17 | Supply of Fixing of MS angle Iron door,window ventilation frame made of approved MS angle Iron wrought to required from including drilling hole welding and recetting where necessary and also including supply of all material such as steel hinges required size nut bolts etc and also including all taxes wastage and one coat of red oxide paint complete in all respect as per direction of Engineer in charge for proper completion of work at site of work.( 40 x 40 x 5 mm ) |
| 18 | Supply of Fixing ofApprovedMS Z-Section windows and ventilators excluding cost of glass panes but including supply of all materials its fabrication nuts and bolts,hole fast for proper completion of work as per direction of engineer in charge and also including cost of handle stays rod etc.and one coat of red oxide paint complete in the respectsite of work. |
| 19 | Supply of Fixing MS grill of a approved quality and drawing made of flat iron not bigger then 20 x 4mm size including supply of materials fabrication labour T&P and also one coat of red oxide paint complete in all respect as per direction of Engineer in chrage for proper completion of work at site. |
| 20 | 12 mm cement plasterinsingle coat on rough sideofsingle orhalfbrick wall for interior plastering up to floor twolevelincludinginternalrounded angles not exceeding80mm ingirth and finshed even and smooth. (1)1 cement : 6coarse sand. |
| 21 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth. (1) 1 cement : 6 Coarse sand (1.25FM) |
| 22 | Providing and laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600mm x600mm size in flooring or skirting laid with 1:3 cement mortar (1cement :3 coarse sand ) finishing with cement slurry & pigment grouting & Polishing complete i/c supply of all material labour T&P etc. required for proper completion of work .excluding base concrete |
| 23 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade (Area of slab upto 0.50 sqm) |
| 24 | Supply and fixing 6mm (1/4\"\") China white glazed tiles in flooring and skirting laid with ratio 1:3 cement and approved coarse sand finished with white cement slurry jointing and polishing complete, including supply of all materials,labour and T&P etc.Required for proper completion of work. |
| 25 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick |
| 26 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters |
| 27 | Providing & fixing Stainless steel sliding door bolts ISI marked to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . |
| 28 | Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 250mmx10mm |
| 29 | Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm |
| 30 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete |
| 31 | One coat Priming coat and two coat oil distemper on new work including supply of all material labour T&P etc required for proper completion of work. |
| 32 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primerapplied @ 2.20 kg/ 10 sqm) |
| 33 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 34 | S/F of 4.0 mm thick Panes of glass with and Including Atul or Equivalent ISI mark quality putty and brads and spring incluing supply of all materials labour and T&P etc. required for proper completion of work. |
| 35 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading |
| 36 | Painting or vanishing two coats on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials labour and T & P etc. required for proper completion of work.Paint to be used should confirm to the I.S.I No.103 1950 |
| 37 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment |
| 38 | S/O Hand rail and balustrade modular system passive SS-304 grade decorative railing system comprising of hand rail 50mm and 1mm thick and 3 No Horizontal steel pipe of 19mm dia and 1.5mm thick of equal spacing with balustrade to SS pipe of 38mm and 1.5mm thick @ 1200mm C/C of passivated SS 304 grade and fix duly on the floor with specially rivet expansion bolt and finish the surface foor and covering with steel show with all visible stainless metal of 304 grade in satin finish hight of railing is 900mm as per detailed specification. |
| 39 | Supply and fixing of anodized aluminium door having 2mm thick aluminium section excluding coating and average coating of 20 microns fully glazed made of aluminium door tube size 83.5x44.65 m as verticalmember and 1140x44.45 mm size tube in bottom and horizontal member door chaukhat should be of aluminium tublar vertical with two openable shutter, the rate will include cost of material fixtures 4mm glass handles locks screw necessary bending and excluding cost of floor spring if required for proper completion of the work as per direction of Engineer-In-Charge |
| 40 | P&L Brick coba 100mm thick laid with M-150 class brick bats coba7.50cm thick gap of 15mm to each other,over 20mm thick base of cement mortar 1:4 cement & coarse sand mixed with water proofing compund spreading cement slurry mixed with aerelic cement concrete water proofing compund filled gaps of coba & top of coba mortar mixed with water proofing compoundin 1:4 cement & coarse sand mortar finished smooth & top mashed false square 30cm x30cm and side wall parapet shall be mono tythic plaster wall upto 30cm.higher and junction and corner shall be rounded by brick ballast cement & coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compund @ 2% by weight & including S/O all material labour T&P etc complete for proper completion of work. |
| 41 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required Cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated ofthickness 60 microns (minimum) , including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 42 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge. |
| 43 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc.with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) |
| 44 | Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrsPVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. Orissa Pattern W.C. pan of size580x 440mwith integral type foot rests flush pipe and over flow arrangement. |
| 45 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mmbrass pillar taps, brass chain with rubber plug, 32mmbrass waste of standard pattern including cutting & making good the walls wherever required.a) Flat back wash Basin size 550x400 mm with single 15mmbrass pillar tap. |
| 46 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32 mm dia |
| 47 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.40 mm dia |
| 48 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. |
| 49 | Supplying & Fixing of CP soap tray fixed to the wall with PVC rubber plug with CP brass screws- Make -ESSCO AEC=1131 |
| 50 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, 110 mm diameter |
| 51 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 52 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 53 | Providing & Fixing UPVC Floor trap of self cleaning design with CP Jali complete in all respects. (Make : Supreme / Finolex) 110 X 110 mm P-Type |
| 54 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Reducing Tee 100X100X75mm |
| 55 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Door Tee 110X110X75mm |
| 56 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Door Tee 75X75X75mm |
| 57 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Bend 110 mm |
| 58 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Bend75 mm |
| 59 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Terminal Guard 110 mm |
| 60 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Terminal Guard 75 mm |
| 61 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. (Internal work) Expansion on wall 32 mm dia nominal bore. (medium duty) |
| 62 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work. 32 mm diameter pipe. |
| 63 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes |
| 65 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes |
| 66 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore |
| 67 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore |
| 68 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 69 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 25mm nominal bore |
| 70 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 32mm nominal bore |
| 71 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore |
| 72 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
| 73 | Supply and fixing of UPVC SWR pipe type -B confirming to IS-13592 including jointing the pipes with rubber ring lubricant and UpVC SWR cuplar confirming to IS-14735 also including excavation of trences as before but excluding supply and cost of other fitting such as elbow bead, tee and Y-tee including supply of all material labour and t&p required for proper completion of the work.a) 110mm diameter |
| 74 | Supply and fixing of UPVC SWR pipe type -B confirming to IS-13592 including jointing the pipes with rubber ring lubricant and UpVC SWR cuplar confirming to IS-14735 also including excavation of trences as before but excluding supply and cost of other fitting such as elbow bead, tee and Y-tee including supply of all material labour and t&p required for proper completion of the work.b) 160mm diameter |
| 75 | Constructing brick masonry chamber 600 x 600x750mm insidewithF.P.S. brickwork in cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve / Air Valve, with C. I. surface box 100 mmtop diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slabwith 1 : 2 : 4 mix (1 cement : 2 coarsesand : 4 gradestone aggregate 20 mm nominal size); necessary excavation,foundationconcrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plasteringwithcement mortar 1 : 3 (1 cement : 3 coarsesand ) 12mmthick finished with a floatingcoatofneat cementcomplete as per standarddesign |
| 76 | Wiring point for light with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the medium class PVC conduit, with PIANO Type switch and ceiling rose/angle/batten holder on 3 mm, thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash. |
| 77 | Wiring point for plug point with 5 Amp flush type switch and 3 pin socket and earthcontinuity wire of 1.5 Sq.mm. FRLSH PVC insulated multi strand copper conductor cable |
| 78 | Wiring point for plug with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the medium class PVC conduit, IANO switch and socket etc. complete in all respects, as directed including matching colour wash. |
| 79 | Supply & fixing of call bell with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the medium callapvc conduit with modular type bell push etc. complete in all respect. |
| 80 | Wiring point for fan/ fress air fan with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit, IANO switch and ceiling rose on 3 mm, thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash. |
| 81 | Wiring point for H.P.M.V./Sodium Vapour Lamp with 1.5 sq.mm FRLSHPVC insulated multistrand Single Core copper conductor cable in heavy guage PVc Conduit partlt concealed in wall and partlt laid in slab alongwith the rainfoucement before concreting ,complete with1.5 mm copper earth wire drawn inside the conduit, modular switch and ceiling rose on 3 mm, thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash. |
| 82 | Wiring point for exhaust fan with 1.5 sq.mm FRLSHPVC insulated multistrand Single Core copper conductor cable in heavy guage PVc Conduit partlt concealed in wall and partlt laid in slab alongwith the rainfoucement before concreting ,complete with 1.5 mm copper earth wire drawn inside the conduit, 15A piano typeswitch and ceiling rose on 3 mm, thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash. |
| 83 | Wiring point of power plug with 20 amp/250 volt flush type moduler switch and 5 pin 20 a/250 volt flush type universal moduler socket switch on concealled M.S. box including supply of all material , labour T&P etc. required for proper completion of work. |
| 84 | Wiring point of power plug with 15 amp/250 volt flush type moduler switch and 5 pin 15A/250 volt flush type universal moduler socket switch on concealled M.S. box 175mm x 100mm x 50mm size with laminated bakelite sheet cover 3 mm thick fixed with brass machine screw and cup washer. |
| 85 | Supply & wiring of submain with two number 2.5 sq.mm. FR PVC Insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one number 1.5 sq.mm. FR PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn in conduit. |
| 86 | Supply & wiring of submain with two number 4 sq.mm. FR PVC Insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one number 2.5 sq.mm. multistrand copper conductor cable as earth continuity wire drawn in conduit complete in all respect. |
| 87 | Supply & wiring of submain 4 number 10 sq.mm. FRLSh PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy duty (2mm thick) PVC conduit with two nos. 6 sq.mm. FR PVC Insulated multistrand copper conductor cable as earth continuity wire drawn in conduit complete in all respects. |
| 88 | Supply & wiring of submain 4 number 16 sq.mm. FRLSh PVC insulated 1100 V grade multistrand single core copper conductor cable in 40 mm dia(2mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement berofoe concreting. with two nos. 10 sq.mm. single core copper conductor cable as earth continuity wire drawn in conduit including matching colour wash etc. complete in all respects. |
| 89 | Supply & Fixing of LED Tube Light with metal heavy duty box type light fitting 2x22 watt suitable for up to 2x22 watt LED polycarbonateTube suitable for both surface & suspendedcomplete in all respect |
| 90 | Supply and fixing ofElectronic FanRegulator(Modular) 120-280 VISI marked, on the existingswitch board including making connections,requiredmaterial,labourT&Petc.for proper completion of work to the satisfaction of Engineer Inchargeof work. |
| 91 | Supply of Fixing of Wall mounted Fan with Remote 400 mm wall fan aerodynamic designed resin blades give high air thrust 90 degree oscillation RPM 1330 Adjustable upward and downward tilt mechanism motar protected through thermal overload protection device LED indicator withas equivalent Havells,Orient,Bajaj etc.proper completion of work |
| 92 | Supply & fixing of 3 mm thick backlitesheet J,B, cover complete with all material labour T&P as per direction of E/I |
| 93 | Supply & fixing of 3 mm thick backlitesheet cover round/hexagonaltype for fan box complete with all material labour T&P as per direction of E/I |
| 94 | Erection & testing of Exhaust fan on the existing hole with suitable size rag bolt nut & washer etc. complete in all respects. |
| 95 | Erection and testing of ceiling fan and regulator for room height upto 3.5 mts. i/c supply of 3 mm thick G.I. down rod 19 mm dia duly painted, complete in all respects. |
| 96 | S/F of flush/surface mounting 4 ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by E/I. |
| 97 | S/F of flush/surface mounting 6 ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by E/I. |
| 98 | S/F of flush/surface mounting 8 ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by E/I. |
| 99 | S/F of 240 volts \"L\" series 6-32 amp SP miniature circuit breaker (10 K A) in existing MCB, DB complete with connections as required (Legrand Lexic) |
| 100 | S/F of 240 volts \"C\" series 40-63 amp FP miniature circuit breaker (10 K A) in existing MCB, DB complete with connections as required. |
| 101 | Supply and fixing of 32 a DP MCB (10ka) c CURVE FOR POLES |
| 102 | Supply & fixing oftesting joint of copper strip 32 mm x 6 mm and 150 mm long with tinned of brass bolts and nut etc.complete in all respects |
| 103 | Supply & laying of 25mmx3mm G.I. strip for earthing purpose as required complete in all respects |
| 104 | Supply & laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the engineer in charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(As per P.W.D. SOR 501) 25 sq.mm 3 1/2 core |
| 105 | Supply & laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the engineer in charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(As per P.W.D. SOR 501) 10 sq.mm 4 core |
| 106 | Supply & laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the engineer in charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(As per P.W.D. SOR 501) 35 sq.mm 3 1/2 core |
| 107 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, under ground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer in charge.16 sq.mm 3 1/2 core |
| 108 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, under ground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer in charge.10 sq.mm 3 1/2 core |
| 109 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, under ground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer in charge.25 sq.mm 3 1/2 core |
| 110 | Supply & fixing of Plain or Pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per dorection of the Engineer-In charge.16 sq.mm |
| 111 | Supply & fixing of Plain or Pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per dorection of the Engineer-In charge.10 sq.mm |
| 112 | Supply & fixing of Plain or Pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per dorection of the Engineer-In charge.25 sq.mm |
| 113 | S&F of 63 amp. TP MCB (10KA) c curve |
| 114 | Addition for light / fan points with moduler type switch in place of piono type switch. |
| 115 | Addition for plug points with moduler type switch in place of piono type switch. |
| 116 | Addition for Call bell points with moduler type switch in place of piono type switch. |
| 117 | Addition for HPMV points with moduler type switch in place of piono type switch. |
| 118 | Addition for exhaust points with moduler type switch in place of piono type switch. |
| 119 | Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required1 or 2 Module (75 mm x 75 mm) |
| 120 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. Telephone/Datasocket outlet |
| 121 | Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2 pair |
| 122 | S/F of Industrial water tight oblong 10 watt LEDbulk head fitting luminaire having die cast housing with driver set confirming to IP 65 and above protection complete in all respect. |
| 123 | Supply and laying of 1800 mm x900 mmx12 mm thick chequered rubber matt of tested quality.ing. |
| 124 | Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc complete as required.a) 300 mm. sweep. |
| 125 | Supply & Installation of Split Direct Expansion Air Conditioners Suitable for Operation on A/C supply single phase 50HZ 230 Volts with hermetically sealed compressor with air cooled condenser, moter capacitor and start run capacitor, relay and over load protector internal unit with one indoor and outdoor unit. The condenser unit will be placed out side the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube (high wall choreded/ cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit.(1.50 tonne 5 star Rated) |
| 126 | Supply and Installation of V-Guard/Microtek brand make as equivalent stablizers which suitable for split A.C. |
| 127 | 12 mm cement plasterinsingle coat on rough sideofsingle orhalfbrick wall for interior plastering up to floor twolevelincludinginternalrounded angles not exceeding80mm ingirth and finshed even and smooth. (1)1 cement : 4 coarse sand. |
| 128 | Providing M.S. foot rest including fixing with 20 x 20 x 10 cm cement concete block 1:3:6 (1 cement : 3 coarse :6 graded aggregate of nominal size 20 mm ) as per standard with 20x20 mm sqm. bar. |
| 129 | Providing & fixing soil, wast and vent pipe. 110 mm dia |
| 130 | Providing & fixing sand cost iron terminal guard 75 mm dia. |
| 131 | Providing & fixingSWR tee at the inlet & outlet of septic tank. |
| 132 | Supply & fixing of medium quality R.C.C. Manhole coverwith frame complete.HD.-20-Circular shape ,560 int. dia. |
| 133 | Supply & fixing of medium quality R.C.C. Manhole coverwith frame complete.HD.-20-Circular shape ,M.D. 10 - Square shape 450 int. dia. |
| 134 | Constructing circular soak pit 2.5m internal diameter and 3m effective depth including excavation, disposal of surplus earth, refilling it with coarse aggregate and RCC slab on to 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate) with 450mm dia manhole cover and frame complete as required as per the standard design. |
AI Tender Summary
Tender Timeline
Jun 05, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 08, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 08, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender