Tender For Day To Day Maintenance Including Certain Other Misc Works At Md, Otm, Mes Area At West Side Of Lehl Marg Under Ge (S) Binnaguri
Tender Value
45 Lakhs
Estimated cost
Bid Submission
22 Jun 2023
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
binnaguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Day To Day Maintenance Including Certain Other Misc Works At Md, Otm, Mes Area At West Side Of Lehl Marg Under Ge ( S ) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site. |
| 2 | All as item No 1 here-in before but n.exc 1.5 Sqm each. |
| 3 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each. |
| 4 | Taking down shutters and refixing in same opening of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 5 | Re-securing or Easing and adjusting without taking down of shutterof any description exc 1 sqm but not exc 2.0 sqm complete all as specified and as directed. |
| 6 | Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises. |
| 7 | Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for grils.rails etc |
| 9 | Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins. |
| 10 | Demolition of precast concrete block/brick wallingbuilt in cement mortarof any description etc complete all as specified. |
| 11 | Dismantling old PGI/CGI sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete. |
| 12 | Demolition of cement concrete of any position and description. |
| 13 | Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs. |
| 14 | Taking town of steel windows/ventilators of any size anddescriptionand removal from site |
| 15 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 16 | M& L vetrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement sluury and pointed in white or coloured cement to match complete over 15mm thick screed bed in CM(1:6) all as specifierd and as directed. |
| 17 | All as per item no 16 above but as in skirting 10 cm height. |
| 18 | M&L for joint freenon-skid ceramic tiles any selectedcolour(600x600x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge |
| 19 | All as item No 18 here-in before but on vertical surfaces but on 10mm thick rendering in CM (1:4) complete.(Size =600x100mm) |
| 20 | M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge |
| 21 | M&L for glazed colouredceramic tiles (450x350x7mm thick)on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed by Engr-in-charge. |
| 22 | M&L for providing machine cut polished Kota stone slab 18-20mm thick over cement screed bed and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thick screed bed complte. |
| 23 | All as per item No 22 but in narrow width of vertical surfaces. |
| 24 | M&L for pre-painted galvalume aluminium zinc coating GI based Corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws/J hooks as specified. |
| 25 | M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws/J hooks as specified. |
| 26 | M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters;verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. |
| 27 | M&L for MS flat iron bent to shape, holes drilled etc complete as inwind ties etc including one coat of red oxide paint. |
| 28 | M&L forMS plate of any size & thickness, holes drilledor without drilled etcc including one coat of red oxide paint complete all as specified and as directed. |
| 29 | M&Lfor 75 mm thickcement concrete 1:3:6type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and incl use and waste of form workand finishing the surface even and rough to receivethe topping layer ortiling complete . |
| 30 | M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even androughto receive floor finishes. |
| 31 | M & L for providing plain cementconcrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 32 | M&L for Plain Cement concrete (1:4:8) type D2 (Using 40 mm graded stone agg)in foundations,filling and mass concrete complete all as specifide as directed by the Engr-in-charge. |
| 33 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 34 | S&Fof 3mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin. |
| 35 | All as per item No.34 here-in- above but 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete |
| 36 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm |
| 37 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm |
| 38 | M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints. |
| 39 | M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats. |
| 40 | S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) suppliedand fitted to chowkats. |
| 41 | S&F of factory made steel windows with side hung shutters openable type including friction/projected typehinges steel handle and peg stay complete withoutglazing bars fixed to existiog opening and making to match as per existing surfaces. |
| 42 | S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows. |
| 43 | S&F in repairs of factory made steel ventilator with top hung shutter including friction/ box typehinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and directed . |
| 44 | Restraining and rescuring of aluminium section of shutter and frame, including proper adjustment of floor spring and fixing of new rubber gasket etc of existing door for proper functioning of each shutter n exc 2 sqm complete all as specified and as directed. |
| 45 | Repair for wooden doors shutters and windows for proper closing/ opening including necessary cutting, filling, painting with synthetic enamel paint to match existing finishes complete all as specified and as directed. |
| 46 | M & L for fabrication and fixing of anodised powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6 mm x 44.45 mm x2 mm and section of bottom and top rail iof section 114 mm x 44.45 mm x 2mm and lock rail shutter frame of 83 mm x 44.45 x 2 mm with and including panels of 5.5 mm thick plain/ forsted float glass, and with anodised aluminum snap beading of size 18.20 mm x 16.66 mm scred for fixing fully including all neceassaryfittings and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter, 1 no heavy duty door shutter 1 o 200 mm long aluminium tower bolt and 3nos 125 mm long stainless steel butt hinges per shutter including taking down old one complete all as specified and as directed by the Engr-in-Charge. |
| 47 | S&F Powder coatedaluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. |
| 48 | S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as Specified. |
| 49 | S&F Framed work such as grills,gratings, etcwith ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 50 | M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete. |
| 51 | M&L for brick work with sub class \"B\" bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed. |
| 52 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair. |
| 53 | M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only). |
| 54 | M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement. |
| 55 | Supply only integral water proofing compound. |
| 56 | M& l for two coat of Oil bound distember on new wall surface including preperation of the surface all as directed and specified. |
| 57 | M&L for applying 1.5mm thick wall care putty on new or old wall surface all as directed and specified complete. |
| 58 | M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified and directed. |
| 59 | Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubingconduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls. |
| 60 | Taking up or downsteel water tubings and fittings etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified and as directedof following bore:-(a)Bore tubing 15mm |
| 61 | (b)Bore tubing 20mm |
| 62 | M & L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following.(a) Bore tubing 15mm |
| 63 | (b) Bore tubing 20mm |
| 64 | All as per item No 62 (a) here-in-above but fixing only. |
| 65 | Al as per item No 63(b) here-in-above but fixing only |
| 66 | S & F in repair 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed. |
| 67 | Disconnecting existing tanks of capacity exc 250 Ltrs and n. exc 500 Ltrs, setting aside (or lowering if required) for repairs with all necessary fitting as required , cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 68 | Disconnecting existing tanks of capacity exc 500 Ltrs and n. exc 1000 Ltrs, setting aside (or lowering if required) for repairs with all necessary fitting as required, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 69 | S&F in repair 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete. |
| 70 | S&F250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete. |
| 71 | M&L for 150 mm size aluminium anodised cast type handles. |
| 72 | M&L in repair 150 mm size aluminium anodised cast type handles. |
| 73 | S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section. |
| 74 | S&F in repair 100mm size mild steel butt hinges medium weight. |
| 75 | S&F100mm size mild steel butt hinges medium weight. |
| 76 | S&F 75mm size stainless steel butt hinges with mild steel hinge pin. |
| 77 | S&Fin repair 75mm size stainless steel butt hinges with mild steel hinge pin. |
| 78 | S&F in repairs ofPVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle,bracket, longflush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC (Make : Sleek of Hindware, Slimline of Parryware or equivalent of Cera) |
| 79 | S&F in repairWater Closet (squatt pattern) of vitruous china squatting pan of pattern \"ORRISA\" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed. |
| 80 | S&F in repairVitreous china wash down water closet pan (pedesatal pattern) (EWC)white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging divice etc complete fixed in repairs. |
| 81 | Supply and fixin repair CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe. |
| 82 | S&F in repair wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length. |
| 83 | S&Fof PVC connections 15 mm size with PTMT nuts of length 600 mm. |
| 84 | S&Fin repairs bib taps 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 85 | S&F in repairs for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair. |
| 86 | S&F in repairs angle valve,fancy type chromium plated, brass, 15mm bore complete all as specified and directed. |
| 87 | S&Fin repair angle valve,fancy type chromium plated, brass, 15mm bore complete all as specified and directed. |
| 88 | S&F 20 in repair mm dia PVC ball cock (PVC floatvalves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. |
| 89 | Supply and fixed in repairs sinks without drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all complete as specified and as directed.(Make: NIRALI/HIND WARE OR EQUIVALENT APPROVED MAKES). |
| 90 | S&F in repair 1.00 mm thick stainless steel plate rack of size 31\"x30\"x10\" complete all as specified and directed. (Make - Model No BSKPR-314 of Blue Star/Niralior its equivalent make) |
| 91 | Supply & fixing in repair of pillars taps,fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, scewed for iron pipe 15 mm bore |
| 92 | S&F Aluminium anodised,barrel tower bolts of extruded section of 75 mm sizefixed |
| 93 | S&F in repair Aluminium anodised,barrel tower bolts of extruded section of 75 mm sizefixed |
| 94 | S&Fin repair Brass CP mixer for mixing hot & cold water screweddown for iron pipeand fixed complete all as specified and directed. |
| 95 | S&F in repair central hole basin mixer for WHB complete all as specified and directed. |
| 96 | S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including complete all as specified and as directed. |
| 97 | S&Ffor PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge. |
| 98 | S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed by Engr-in-Charge (Bore of pipe 110mm) |
| 99 | M&L in repairs for CINahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet100mm) as in repair |
| 100 | M&L in repairs for PVC floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet100mm) as in repair |
| 101 | S&Ffor PVC (SWR) (Bore of pipe 75mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge. |
| 102 | S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed by Engr-in-Charge (Bore of pipe 75mm) Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule \"A\"/BOQ |
AI Tender Summary
Tender Timeline
May 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 22, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 24, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender